考虑多因素协同作用的单晶高温合金高周疲劳强度预测模型

刘星月; 刘海燕; 张晓杰; 胡殿印; 刘茜; 毛建兴; 张斌

doi:10.13224/j.cnki.jasp.20250200

考虑多因素协同作用的单晶高温合金高周疲劳强度预测模型

doi: 10.13224/j.cnki.jasp.20250200

刘星月^1,,
刘海燕¹,
张晓杰^2,*, ,,
胡殿印^{1, 3, 4},
刘茜²,
毛建兴^{1, 4},
张斌⁵

1.
北京航空航天大学航空发动机研究院，北京 100191
2.
北京航空航天大学能源与动力工程学院，北京 100191
3.
北京航空航天大学航空发动机结构强度北京市重点实验室，北京 100191
4.
中小型航空发动机联合研究中心，北京 100191
5.
杭州市北京航空航天大学国际创新研究院（北京航空航天大学国际创新学院），杭州 311115

基金项目: 国家自然科学基金（52205081）

详细信息

作者简介:
刘星月（1999-），女，硕士，主要研究方向为结构强度与可靠性。E-mail：lxytxb0@163.com

通讯作者:
张晓杰（1994-），女，副教授，博士，主要研究方向为结构强度、振动和气动弹性。E-mail：zxjbuaa@buaa.edu.cn

中图分类号: V232.4
计量
- 文章访问数: 249
- HTML浏览量: 179
- PDF量: 43
- 被引次数: 0
出版历程
- 收稿日期: 2025-04-24
- 网络出版日期: 2025-11-04

High-cycle fatigue strength prediction model of single crystal superalloy considering multi-factor synergy

LIU Xingyue^1
,,
LIU Haiyan¹,
ZHANG Xiaojie^{2,*
, ,},
HU Dianyin^{1, 3, 4},
LIU Xi²,
MAO Jianxing^{1, 4},
ZHANG Bin⁵

1.
Research Institute of Aero-Engine，Beihang University，Beijing 100191，China
2.
School of Energy and Power Engineering，Beihang University，Beijing 100191，China
3.
Beijing Key Laboratory of Aero-Engine Structure and Strength，Beihang University，Beijing 100191，China
4.
United Research Center of Mid-Small Aero-Engine，Beijing 100191，China
5.
Hangzhou International Innovation Institute of Beihang University，Hangzhou 311115，China

摘要

摘要:
通过开展不同一次取向偏角（1.5°～7.1°）、温度（850 ℃和980 ℃）和应力比（−1、−0.33、0.1、0.5、0.8和0.9）条件下的气膜孔模拟件高周疲劳试验，结合疲劳断口宏微观形貌分析，系统揭示了晶体取向、温度场与载荷参数对疲劳强度的影响规律。基于Kitagawa-Takahashi（K-T）图法框架，结合EI-Haddad模型与平均应力修正理论，构建了多因素协同作用的高周疲劳强度预测模型。结果表明：疲劳断口均呈现类解离断裂特征，未观察到缩颈或明显伸长现象，疲劳裂纹主要萌生于气膜孔附近，并沿{111}晶体学滑移平面扩展。当一次取向偏角小于7.1°时，疲劳强度的差异不超过2%，显示该阈值范围内的取向不敏感性。温度效应表现为显著的高周疲劳强度衰减规律，980 ℃下的疲劳强度较850 ℃下降了12.4%。恒寿命曲线（2×10⁷循环周次）呈现典型外凸特性：低应力比区（R<0.5）平均应力增速为高应力比区（R>0.5）的3.44倍，而应力幅值衰减速率呈现相反规律。建立的疲劳强度模型显示预测值与试验值相比误差小于7.7%，表明该模型在复杂多因素耦合条件下的工程适用性，可以为先进航空发动机单晶涡轮叶片的抗疲劳优化设计提供重要理论支撑。
- 单晶高温合金 /
- 气膜孔 /
- 应力集中 /
- 高周疲劳 /
- 疲劳强度预测
Abstract:
The influences of crystal orientation, temperature field and load parameters on fatigue strength were systematically revealed by carrying out high-cycle fatigue tests of film cooling hole simulants under different primary orientation declination angles (1.5°—7.1°), temperatures (850 ℃ and 980 ℃) and stress ratios (−1, −0.33, 0.1, 0.5, 0.8 and 0.9). Based on the Kitagawa-Takahashi (K-T) diagram framework, combined with the EI-Haddad model and the average stress correction theory, a high-cycle fatigue strength prediction model with multi-factor synergy was constructed. The results showed that the fatigue fractures all presented the characteristics of dissociation-like fractures, and no necking or obvious elongation was observed, and the fatigue cracks mainly originated near the film cooling hole and propagated along the {111} crystallographic slip plane. When the primary orientation declination angle was less than 7.1°, the difference in fatigue strength did not exceed 2%, indicating that the orientation within this threshold range was insensitive. The temperature effect showed a significant attenuation law of high-cycle fatigue strength, and the fatigue strength at 980℃ decreased by 12.4% compared with 850 ℃. The constant life curve (2×10⁷ cycles) showed typical convex characteristics: in the low stress ratio region (R<0.5), the average stress growth rate was 3.44 times of the high stress ratio region (R>0.5), while the stress amplitude decay rate showed an opposite law. The established fatigue strength model showed that the error of the predicted value was less than 7.7% compared with the experimental value, indicating that the engineering applicability of the model under the condition of complex multi-factor coupling can provide important theoretical support for the fatigue optimization design of single crystal turbine blades of advanced aero engines.
- single crystal superalloys /
- film cooling holes /
- stress concentration /
- high cycle fatigue /
- fatigue strength prediction

HTML

图 1 高周疲劳强度预测流程图

Figure 1. Flow chart of high-cycle fatigue strength prediction

下载: 全尺寸图片幻灯片

图 2 试样尺寸（单位：mm）

Figure 2. Sample size （unit：mm）

下载: 全尺寸图片幻灯片

图 3 试样1在不同一次取向偏角下的升降数据图

Figure 3. Data of the up-down method of sample 1 at different primary orientation declination angles

下载: 全尺寸图片幻灯片

图 4 试样2在不同一次取向偏角下的升降数据图

Figure 4. Data of the up-down method of sample 2 at different primary orientation declination angles

下载: 全尺寸图片幻灯片

图 5 不同温度下的升降数据图

Figure 5. Data of the up-down method at different temperatures

下载: 全尺寸图片幻灯片

图 6 不同应力比下的升降图

Figure 6. Data of the up-down method at different stress ratios

下载: 全尺寸图片幻灯片

图 7 寿命为2×10⁷循环周次的恒寿命图

Figure 7. Constant life diagram with a lifetime of 2×10⁷ cycles

下载: 全尺寸图片幻灯片

图 8 不同一次取向偏角下的断口侧面形貌

Figure 8. Fracture side morphology under different primary orientation declination angles

下载: 全尺寸图片幻灯片

图 9 不同应力比下的断口侧面形貌

Figure 9. Fracture side morphology under different stress ratios

下载: 全尺寸图片幻灯片

图 10 断口表面形貌

Figure 10. Fracture surface topography

下载: 全尺寸图片幻灯片

图 11 不同一次取向偏角下的γ′相形貌

Figure 11. γ′ phase morphology under different primary orientation declination angles

下载: 全尺寸图片幻灯片

图 12 不同应力比下的γ′相形貌

Figure 12. γ′ phase morphology at different stress ratios

下载: 全尺寸图片幻灯片

图 13 网格模型示意图

Figure 13. Diagram of the meshed model

下载: 全尺寸图片幻灯片

图 14 试样等效应力分布

Figure 14. Equivalent stress distribution of the specimen

下载: 全尺寸图片幻灯片

图 15 缺陷尺寸参数与应力集中系数的关系

Figure 15. Relationship between the notch size parameter and the stress concentration coefficient

下载: 全尺寸图片幻灯片

图 16 平均应力模型在2×10⁷循环周次下的恒寿命图

Figure 16. Constant life plot of the average stress model at2×10⁷ cycles

下载: 全尺寸图片幻灯片

图 17 基于Gerber模型建立修正的平均应力模型

Figure 17. Lateral morphology of the fracture under different primary orientation declination angles

下载: 全尺寸图片幻灯片

表 1 试验条件

Table 1. Test conditions

试样形式	气膜孔倾角/ （°）	取向偏角/ （°）	温度/ ℃	应力比	数量/ 件
试样1	90	1.5	850	−1	16
试样1	90	5.5	850	−1	16
试样2	40	1.6	850	−1	15
	40	1.6	850	−0.33	15
	40	2.2	850	0.1	15
	40	2.2	850	0.5	15
	40	2.3	850	0.8	15
	40	2.3	850	0.9	15
	40	7.1	850	−1	12
	90	5.5	850	−1	15
	90	5.5	980	−1	15

下载: 导出CSV

表 2 不同一次取向偏角下试样的疲劳强度

Table 2. Fatigue strength of the specimen at different primary orientation declination angles

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/ ℃	应力比	疲劳强度/ MPa
试样1	90	1.5	850	−1	230
试样1	90	5.5	850	−1	232
试样2	40	1.6	850	−1	225
试样2	40	7.1	850	−1	229

下载: 导出CSV

表 3 不同温度下试样的疲劳强度

Table 3. Fatigue strength of the specimen at different temperatures

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/ ℃	应力比	疲劳强度/ MPa
试样2	90	5.5	850	−1	235
试样2	90	5.5	980	−1	209

下载: 导出CSV

表 4 不同应力比下试样的疲劳强度

Table 4. Fatigue strength of the specimen at different stress ratios

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/℃	应力比	平均应力/MPa	应力幅值/MPa
试样2	40	1.6	850	−1	0	225.0
	40	1.6	850	−0.33	109.0	216.5
	40	2.2	850	0.1	260.4	213.0
	40	2.2	850	0.5	545.6	182.0
	40	2.3	850	0.8	688.5	76.5
	40	2.3	850	0.9	704.0	37.0

下载: 导出CSV

表 5 气膜孔模拟件的疲劳强度

Table 5. Fatigue strength of a simulated film cooling hole part

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/ ℃	应力比	疲劳强度/MPa
试样1	90	1.5	850	−1	230
试样2	40	1.6	850	−1	225
	40	7.1	850	−1	229
	90	5.5	850	−1	235

下载: 导出CSV

表 6 第二代单晶高温合金材料参数

Table 6. Material parameters of the second generation of single-crystal superalloys

材料参数	数值
材料参数	t=850 ℃	t=980 ℃
E_[001]/GPa	98.0	80.5
E_[011]/GPa	137.5	145.0
E_[111]/GPa	205.0	217.5
ν_[001]	0.383	0.390
C₁₁/GPa	186.8	160.6
C₁₂/GPa	116.0	102.7
C₄₄/GPa	80.4	74.2

下载: 导出CSV

表 7 不同试样的应力集中系数${\boldsymbol{K}}_{\bf{t}}' $

Table 7. Stress concentration coefficient ${\boldsymbol{K}}_{\bf{t}}' $ of different specimens

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/℃	应力比	疲劳强度/MPa	应力集中系数$K_{\rm{t}}' $
试样1	90	1.5	850	−1	230	1.378
试样2	40	1.6	850	−1	225	1.547
	40	7.1	850	−1	229	1.444
	90	5.5	850	−1	235	1.381

下载: 导出CSV

表 8 气膜孔模拟件的疲劳强度

Table 8. Fatigue strength of a simulated film cooling hole part

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/℃	应力比	疲劳强度/MPa
试样2	40	1.6	850	−1	225
	40	2.2	850	0.1	213
	40	2.2	850	0.5	182
	40	2.3	850	0.9	37

下载: 导出CSV

表 9 不同试验条件下的疲劳强度预测

Table 9. Fatigue strength prediction under different test conditions

试样形式	气膜孔倾角/（°）	一次取向偏角/（°）	温度/℃	应力比	试验值/MPa	预测值/MPa	误差/%
试样1	90	5.5	850	−1	232.0	232.1	0.04
试样2	40	1.6	850	−0.33	216.5	220.5	1.85
	40	2.3	850	0.8	76.5	74.5	2.61
	90	5.5	980	−1	209	224.9	7.61

下载: 导出CSV

参考文献(28)

[1]	方昌德. 航空发动机的发展前景[J]. 航空发动机, 2004, 30(1): 1-5. FANG Changde. Prospective development of aeroengines[J]. Aeroengine, 2004, 30(1): 1-5. (in Chinese FANG Changde. Prospective development of aeroengines[J]. Aeroengine, 2004, 30(1): 1-5. (in Chinese)
[2]	陈博, 朱剑寒, 鲁辉军. 航空发动机涡轮叶片高周疲劳裂纹故障分析与思考[J]. 燃气涡轮试验与研究, 2020, 33(3): 33-36. CHEN Bo, ZHU Jianhan, LU Huijun. Analysis and consideration for turbine blade high-cycle fatigue crack failure of aero-engine[J]. Gas Turbine Experiment and Research, 2020, 33(3): 33-36. (in Chinese CHEN Bo, ZHU Jianhan, LU Huijun. Analysis and consideration for turbine blade high-cycle fatigue crack failure of aero-engine[J]. Gas Turbine Experiment and Research, 2020, 33(3): 33-36. (in Chinese)
[3]	张健, 王莉, 谢光, 等. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124. ZHANG Jian, WANG Li, XIE Guang, et al. Recent progress in research and development of nickel-based single crystal superalloys[J]. Acta Metallurgica Sinica, 2023, 59(9): 1109-1124. (in Chinese ZHANG Jian, WANG Li, XIE Guang, et al. Recent progress in research and development of nickel-based single crystal superalloys[J]. Acta Metallurgica Sinica, 2023, 59(9): 1109-1124. (in Chinese)
[4]	杨治国, 岳珠峰, 尹泽勇, 等. 单晶涡轮叶片材料本构模型及应用研究[J]. 航空动力学报, 2003, 18(5): 650-657. YANG Zhiguo, YUE Zhufeng, YIN Zeyong, et al. Constitutive relationship of nickel-base single crystal superalloys and applications[J]. Journal of Aerospace Power, 2003, 18(5): 650-657. (in Chinese YANG Zhiguo, YUE Zhufeng, YIN Zeyong, et al. Constitutive relationship of nickel-base single crystal superalloys and applications[J]. Journal of Aerospace Power, 2003, 18(5): 650-657. (in Chinese)
[5]	CHOWDHURY T S, MOHSIN F T, TONNI M M, et al. A critical review on gas turbine cooling performance and failure analysis of turbine blades[J]. International Journal of Thermofluids, 2023, 18: 100329. doi: 10.1016/j.ijft.2023.100329
[6]	赖建和. 航空发动机涡轮叶片冷却技术综述[J]. 新型工业化, 2021, 11(8): 39-40. LAI Jianhe. Summary of cooling technology for aero-engine turbine blades[J]. The Journal of New Industrialization, 2021, 11(8): 39-40. (in Chinese LAI Jianhe. Summary of cooling technology for aero-engine turbine blades[J]. The Journal of New Industrialization, 2021, 11(8): 39-40. (in Chinese)
[7]	PEI H Q, SHI L J, MA M Q, et al. Fatigue fracture mechanism and life assessment for irregular film cooling hole structures in Ni-based single crystal turbine blades[J]. Engineering Fracture Mechanics, 2024, 310: 110506. doi: 10.1016/j.engfracmech.2024.110506
[8]	XIAO Quanfeng, XU Yuanming, LIU Xinling, et al. High-cycle fatigue behaviour and crack growth mechanism of Ni-base single crystal superalloy under intermediate temperature[J]. Journal of Materials Research and Technology, 2023, 25: 4036-4049. doi: 10.1016/j.jmrt.2023.06.218
[9]	赵乃仁, 王志辉, 李金国, 等. 一种镍基单晶高温合金的各向异性研究[J]. 材料工程, 2008, 36(2): 58-61. ZHAO Nairen, WANG Zhihui, LI Jinguo, et al. Investigation of the anisotropy for a nickel base single crystal superalloy[J]. Journal of Materials Engineering, 2008, 36(2): 58-61. (in Chinese ZHAO Nairen, WANG Zhihui, LI Jinguo, et al. Investigation of the anisotropy for a nickel base single crystal superalloy[J]. Journal of Materials Engineering, 2008, 36(2): 58-61. (in Chinese)
[10]	WRIGHT P K, JAIN M, CAMERON D. High cycle fatigue in a single crystal superalloy: time dependence at elevated temperature[C]//Superalloys 2004. Warrendale, US: TMS, 2004: 657-666.
[11]	KIM D H, KIM K K, PARK K B, et al. Prediction of thermal fatigue life based on the microstructure of thermal barrier coating applied to single-crystal CMSX-4 considering stress ratio[J]. Ceramics International, 2021, 47(15): 21950-21958.
[12]	ZHANG Yamin, ZHANG Xinzhe, WANG Jiajia, et al. High cycle fatigue life prediction model based on crystal plasticity and continuum damage mechanics for Ni-based single crystal superalloys under a multiaxial stress state[J]. International Journal of Plasticity, 2023, 162: 103526.
[13]	韩国明, 张振兴, 李金国, 等. DD98M镍基单晶高温合金900 ℃高周疲劳行为[J]. 金属学报, 2012, 48(2): 170-175. HAN Guoming, ZHANG Zhenxing, LI Jinguo, et al. High cycle fatigue behavior of a nickel-based single crystal superalloy dd98m at 900 ℃[J]. Acta Metallurgica Sinica, 2012, 48(2): 170-175. (in Chinese HAN Guoming, ZHANG Zhenxing, LI Jinguo, et al. High cycle fatigue behavior of a nickel-based single crystal superalloy dd98m at 900 ℃[J]. Acta Metallurgica Sinica, 2012, 48(2): 170-175. (in Chinese)
[14]	XU Jiachen, ZHAO Xinbao, CHEN Jishan, et al. Temperature-dependent microscopic deformation mechanisms and performance enhancement prospects in high-cycle fatigue of nickel-based single crystal superalloys[J]. International Journal of Plasticity, 2025, 184: 104207. doi: 10.1016/j.ijplas.2024.104207
[15]	MAO Zhuangzhuang, ZHU Yingbin, ZHAO Yao, et al. High-cycle fatigue failure behavior of nickel-based single crystal alloys with different deviation angles in a high-temperature environment[J]. Materials Characterization, 2023, 203: 113118. doi: 10.1016/j.matchar.2023.113118
[16]	史振学, 刘世忠, 赵金乾, 等. 小角度晶界对单晶高温合金高周疲劳性能的影响[J]. 材料热处理学报, 2015, 36(增刊1): 52-57. SHI Zhenxue, LIU Shizhong, ZHAO Jinqian, et al. Effect of low angle boundary on high cycle fatigue properties of single crystal superalloy[J]. Transactions of Materials and Heat Treatment, 2015, 36(Suppl. 1): 52-57. (in Chinese SHI Zhenxue, LIU Shizhong, ZHAO Jinqian, et al. Effect of low angle boundary on high cycle fatigue properties of single crystal superalloy[J]. Transactions of Materials and Heat Treatment, 2015, 36(Suppl. 1): 52-57. (in Chinese)
[17]	LUKÁŠ P, KUNZ L, SVOBODA M. High-temperature ultra-high cycle fatigue damage of notched single crystal superalloys at high mean stresses[J]. International Journal of Fatigue, 2005, 27(10/11/12): 1535-1540.
[18]	谢洪吉, 李嘉荣, 韩梅. 应力比对单晶高温合金高周疲劳行为的影响[J]. 稀有金属材料与工程, 2018, 47(11): 3381-3386. XIE Hongji, LI Jiarong, HAN Mei. Effect of stress ratio on high cycle fatigue behavior of a single crystal superalloy[J]. Rare Metal Materials and Engineering, 2018, 47(11): 3381-3386. (in Chinese XIE Hongji, LI Jiarong, HAN Mei. Effect of stress ratio on high cycle fatigue behavior of a single crystal superalloy[J]. Rare Metal Materials and Engineering, 2018, 47(11): 3381-3386. (in Chinese)
[19]	谢洪吉. DD6单晶高温合金疲劳性能研究[D]. 北京: 北京航空材料研究院, 2018. XIE Hongji. Investigation on fatigue properties of DD6 single-crystal superalloy[D]. Beijing: Beijing Institute of Aeronautical Materials, 2018. (in Chinese XIE Hongji. Investigation on fatigue properties of DD6 single-crystal superalloy[D]. Beijing: Beijing Institute of Aeronautical Materials, 2018. (in Chinese)
[20]	谢洪吉, 李嘉荣, 韩梅, 等. 超温对DD6单晶高温合金组织及高周疲劳性能影响[J]. 稀有金属材料与工程, 2018, 47(8): 2483-2488. XIE Hongji, LI Jiarong, HAN Mei, et al. Effect of over-temperature on microstructure and high cycle fatigue properties of DD6 single crystal superalloy[J]. Rare Metal Materials and Engineering, 2018, 47(8): 2483-2488. (in Chinese XIE Hongji, LI Jiarong, HAN Mei, et al. Effect of over-temperature on microstructure and high cycle fatigue properties of DD6 single crystal superalloy[J]. Rare Metal Materials and Engineering, 2018, 47(8): 2483-2488. (in Chinese)
[21]	史振学, 赵金乾. 一种单晶高温合金不同温度的高周疲劳性能[J]. 有色金属科学与工程, 2019, 10(3): 58-63. SHI Zhenxue, ZHAO Jinqian. High cycle fatigue properties of a single crystal superalloy at different temperatures[J]. Nonferrous Metals Science and Engineering, 2019, 10(3): 58-63. (in Chinese SHI Zhenxue, ZHAO Jinqian. High cycle fatigue properties of a single crystal superalloy at different temperatures[J]. Nonferrous Metals Science and Engineering, 2019, 10(3): 58-63. (in Chinese)
[22]	李嘉荣, 谢洪吉, 韩梅, 等. 第二代单晶高温合金高周疲劳行为研究[J]. 金属学报, 2019, 55(9): 1195-1203. LI Jiarong, XIE Hongji, HAN Mei, et al. High cycle fatigue behavior of second generation single crystal superalloy[J]. Acta Metallurgica Sinica, 2019, 55(9): 1195-1203. (in Chinese LI Jiarong, XIE Hongji, HAN Mei, et al. High cycle fatigue behavior of second generation single crystal superalloy[J]. Acta Metallurgica Sinica, 2019, 55(9): 1195-1203. (in Chinese)
[23]	卢绪平, 王跃, 陈墨, 等. 气膜孔对DD6镍基单晶高温合金高周疲劳强度的影响研究[J]. 推进技术, 2024, 45(8): 2311016. LU Xuping, WANG Yue, CHEN Mo, et al. Effects of film cooling holes on high cycle fatigue strength of DD6 Ni-based single-crystal superalloy[J]. Journal of Propulsion Technology, 2024, 45(8): 2311016. (in Chinese LU Xuping, WANG Yue, CHEN Mo, et al. Effects of film cooling holes on high cycle fatigue strength of DD6 Ni-based single-crystal superalloy[J]. Journal of Propulsion Technology, 2024, 45(8): 2311016. (in Chinese)
[24]	胡春燕, 刘新灵, 陶春虎, 等. 气膜孔分布对DD6单晶高温合金高周疲劳断裂行为的影响[J]. 材料工程, 2017, 45(4): 84-89. HU Chunyan, LIU Xinling, TAO Chunhu, et al. Influence of cooling holes distribution on high cycle fatigue fracture behavior of DD6 single crystal superalloy[J]. Journal of Materials Engineering, 2017, 45(4): 84-89. (in Chinese HU Chunyan, LIU Xinling, TAO Chunhu, et al. Influence of cooling holes distribution on high cycle fatigue fracture behavior of DD6 single crystal superalloy[J]. Journal of Materials Engineering, 2017, 45(4): 84-89. (in Chinese)
[25]	LI Piao, JIANG Wen, SUSMEL L, et al. Porosity-related high-cycle fatigue strength of nickel-base single crystals: Fatigue experiments and electron back-scattered diffraction analysis[J]. International Journal of Fatigue, 2023, 168: 107374. doi: 10.1016/j.ijfatigue.2022.107374
[26]	LIU Liu, HUSSEINI N S, TORBET C J, et al. In situ imaging of high cycle fatigue crack growth in single crystal nickel-base superalloys by synchrotron X-radiation[J]. Journal of Engineering Materials and Technology, 2008, 130(2): 021008. doi: 10.1115/1.2840966
[27]	骆宇时, 郭会明, 赵云松, 等. 热等静压对第二代DD6单晶高温合金高温高周疲劳性能的影响[J]. 机械工程材料, 2016, 40(7): 51-55, 118. LUO Yushi, GUO Huiming, ZHAO Yunsong, et al. Effect of hot isostatic pressing on high-temperature high cycle fatigue properties of a second generation single crystal superalloy DD6[J]. Materials for Mechanical Engineering, 2016, 40(7): 51-55, 118. (in Chinese LUO Yushi, GUO Huiming, ZHAO Yunsong, et al. Effect of hot isostatic pressing on high-temperature high cycle fatigue properties of a second generation single crystal superalloy DD6[J]. Materials for Mechanical Engineering, 2016, 40(7): 51-55, 118. (in Chinese)
[28]	CERVELLON A, HÉMERY S, KÜRNSTEINER P, et al. Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature[J]. Acta Materialia, 2020, 188: 131-144. doi: 10.1016/j.actamat.2020.02.012