留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

径向槽对涡轮叶间补燃室性能影响的数值研究

李明 唐豪 郑海飞 李炎

李明, 唐豪, 郑海飞, 李炎. 径向槽对涡轮叶间补燃室性能影响的数值研究[J]. 航空动力学报, 2014, 29(12): 2836-2844. doi: 10.13224/j.cnki.jasp.2014.12.008
引用本文: 李明, 唐豪, 郑海飞, 李炎. 径向槽对涡轮叶间补燃室性能影响的数值研究[J]. 航空动力学报, 2014, 29(12): 2836-2844. doi: 10.13224/j.cnki.jasp.2014.12.008
LI Ming, TANG Hao, ZHENG Hai-fei, LI Yan. Numerical investigation of influence of radial vane cavity on turbine inter-vane burner performance[J]. Journal of Aerospace Power, 2014, 29(12): 2836-2844. doi: 10.13224/j.cnki.jasp.2014.12.008
Citation: LI Ming, TANG Hao, ZHENG Hai-fei, LI Yan. Numerical investigation of influence of radial vane cavity on turbine inter-vane burner performance[J]. Journal of Aerospace Power, 2014, 29(12): 2836-2844. doi: 10.13224/j.cnki.jasp.2014.12.008

径向槽对涡轮叶间补燃室性能影响的数值研究

doi: 10.13224/j.cnki.jasp.2014.12.008
基金项目: 

国家自然科学基金(51076064)

详细信息
    作者简介:

    李明(1986-), 男, 河南固始人, 工程师, 硕士, 主要从事航空发动机燃烧技术研究.

  • 中图分类号: V231.2

Numerical investigation of influence of radial vane cavity on turbine inter-vane burner performance

  • 摘要: 为探究径向槽对涡轮叶间补燃室的影响,设计了两种涡轮叶间补燃室模型.用计算流体动力学的方法对涡轮叶间补燃室内流动及燃烧进行数值模拟,数值模拟结果与实验数据基本吻合.涡轮叶间补燃室性能稳定,燃烧效率在97.5%以上,绝对压力损失为5.7%.叶背径向槽会引起气流在叶背发生分离,流场遭严重破坏,叶盆径向槽会减弱分离现象,改善出口径向平均速度分布.叶盆径向槽可提高燃烧效率,降低叶片表面温度,使叶间、出口温度更均匀.叶盆径向槽较叶背径向槽能降低CO、未燃碳氢化合物的排放量,但会引起NO排放量增加.

     

  • [1] Sirignano W A,Delplanque J P,Liu F.Selected challenges in jet and rocket engine combustion research[R].AIAA 97-2701,1997.
    [2] Sirignano W A,Liu F.Performance increases for gas-turbine engines through combustion inside the turbine[J].Journal of Propulsion and Power,1999,15(1):111-118.
    [3] 程本林,唐豪,徐夏,等.带TIB的涡扇发动机性能研究[J].航空发动机,2010,36(6):19-22. CHENG Benlin,TANG Hao,XU Xia,et al.Performance study on turbofan engine with turbine inter burner[J].Aeroengine,2010,36(6):19-22.(in Chinese)
    [4] 李建锋,吕俊复.涡轮燃烧技术在涡扇航空发动机上的应用分析[J].空气动力学学报,2010,28(3):358-363. LI Jianfeng,LÜ Junfu.Performance study of technology of combustion inside turbine using in fanjet[J].Acta Aerodynamica Sinica,2010,28(3):358-363.(in Chinese)
    [5] Zelina J,Ehret J,Hancock R D,et al.Ultra-compact combustion technology using high swirl for enhanced burning rate[R].AIAA-2002-3725,2002.
    [6] Mawid M,Thornburg H,Sekar B,et al.Numerical analysis of inter-turbine burner (ITB) concepts for improved gas turbine engine performance[R].AIAA-2005-1162,2005.
    [7] Greenwood R T.Numerical analysis and optimization of the ultra compact combustor[R].Department of the Air force,Air University,AD434747,2005.
    [8] Greenwood R T,Anthenien R.Computational analysis of the ultra compact combustor[R].AIAA-2005-220,2005.
    [9] Mawid M,Thornburg H,Sekar B,et al.Performance of an inter-turbine burner (ITB) concept with three-different vane cavity shapes[R].AIAA-2006-4740,2006.
    [10] 李明,唐豪,张超,等.一种新型涡轮叶间燃烧室的数值模拟[J].航空动力学报,2012,27(1):55-62. LI Ming,TANG Hao,ZHANG Chao,et al.Numerical simulation of a novel turbine inter-vane burner[J].Journal of Aerospace Power,2012,27(1):55-62.(in Chinese)
    [11] Anisko J.Numerical investigation of cavity-vane interactions within the ultra compact combustor[R].Department of the Air Force,Air University,AD449336,2006.
    [12] Anisko J,Anthenien R,Zelina J.Numerical investigation of cavity-vane interactions within the ultra compact combustor[R].AIAA-2006-805,2006.
    [13] Fluent Inc.Fluent user's guide[M].New Hampshire,US:Fluent Inc,2006.
    [14] 金戈,张志学,顾铭企.QD128航改燃气轮机燃烧室数值模拟[J].航空发动机,2008,34(2):30-35. JIN Ge,ZHANG Zhixue,GU Mingqi.Numerical simulation of QD128 aero-derivative gas turbine combustor[J].Aeroengine,2008,34(2):30-35.(in Chinese)
    [15] 蒲宁.航空发动机燃烧室数值仿真中湍流模型的比较研究[D].沈阳:沈阳航空工业学院,2009. PU Ning.Comparison of turbulent models for aero-engine combustor numerical simulation[D].Shenyang:Shenyang Institute of Aeronautical Engineering,2009.(in Chinese)
    [16] 航空发动机设计手册总编委会.航空发动机设计手册:第9册 主燃烧室[M].北京:航空工业出版社,2000.
    [17] 傅维标,卫景彬.燃烧物理学基础[M].北京:机械工业出版社,1984.
    [18] 林宇震,许全宏,刘高恩.燃气轮机燃烧室[M].北京:国防工业出版社,2008.
  • 加载中
计量
  • 文章访问数:  1296
  • HTML浏览量:  4
  • PDF量:  1121
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-08-21
  • 刊出日期:  2014-12-28

目录

    /

    返回文章
    返回