Rotordynamic prediction of mode order transition when rotor has an overhang
doi: 10.13224/j.cnki.jasp.2015.02.019
Rotordynamic prediction of mode order transition when rotor has an overhang
-
摘要: Nowadays rotating machinery grows and develops extremely fast due to its multi-branch application. Although the fields of rotordynamics and rotor balancing had a strong background based on previous experience in order to perform efficient and safe operation for the rotating machines, still there are problems which are hard to be dealt with in some special cases. One of them is balancing of the rotor with huge overhang. Rotor with overhang is inherent to have console modes, which previously often were observed separately from the other modes in rotordynamic literature. In such a way console modes, their behavior, order of appearance and interaction with other modes were described in current paper in more details. Obtained results confirmed that console modes obey the principle of orthogonality in the same way as all other modes and hence could be efficiently balanced using modal balancing method. Simulation results revealed likelihood of such phenomena as modes order transition, when the rotor has an overhang. As a consequence perfectly balanced console rotor could not be so due to modes order transition effect when the bearing stiffness in situ differs from bearing stiffness of balancing equipment. Described results will be useful for engineers who are involved in area of rotating machinery vibration tuning for the rotor with huge overhang and benefit them to recognize these modes efficiently and to perform balancing successfully.
-
关键词:
- rotordynamics /
- turbomachinery /
- rotor with overhang /
- console modes /
- balancing
Abstract: Nowadays rotating machinery grows and develops extremely fast due to its multi-branch application. Although the fields of rotordynamics and rotor balancing had a strong background based on previous experience in order to perform efficient and safe operation for the rotating machines, still there are problems which are hard to be dealt with in some special cases. One of them is balancing of the rotor with huge overhang. Rotor with overhang is inherent to have console modes, which previously often were observed separately from the other modes in rotordynamic literature. In such a way console modes, their behavior, order of appearance and interaction with other modes were described in current paper in more details. Obtained results confirmed that console modes obey the principle of orthogonality in the same way as all other modes and hence could be efficiently balanced using modal balancing method. Simulation results revealed likelihood of such phenomena as modes order transition, when the rotor has an overhang. As a consequence perfectly balanced console rotor could not be so due to modes order transition effect when the bearing stiffness in situ differs from bearing stiffness of balancing equipment. Described results will be useful for engineers who are involved in area of rotating machinery vibration tuning for the rotor with huge overhang and benefit them to recognize these modes efficiently and to perform balancing successfully.-
Key words:
- rotordynamics /
- turbomachinery /
- rotor with overhang /
- console modes /
- balancing
-
[1] Racic Z,Hidalgo J.Practical balancing of flexible rotors for power generation[C]//Proceedings of ASME.Las Vegas,Nevada,USA:ASME,2007:1-10. [2] L'vov M M,Gunter E J.Application of rotor dynamic analysis for evaluation of synchronous speed instability of a generator rotor in a high speed balancing facility[C]//Proceedings of ISCORMA-3.Clevelend,OH,USA:[S .l .],2005:1-9. [3] Hidalgo J I,Dhingra A K.High speed balancing of rotors with overhangs:when is overhang likely to cause problems[J].Journal of Testing and Evaluation,2006,34(3):1-6. [4] Rieger N F.Balancing of rigid and flexible rotors[M].[s.n.]:The Shock and Vibration Information Center,Stress Technology Inc.,1986. [5] Goldin A S.Vibration of rotating machines[M].Moscow:Machinostroenie,2000.(in Russian) [6] Muszynska A.Rotordynamics[M].New York:Taylor & Francis Group,2005. [7] McMillan R B.Rotating machinery:practical solution to unbalance and misalignment[M].New York:The Fairmont Press Inc.,2004. [8] Friswell M I,Penny J E,Lees A W.Dynamics of rotating machines[M].Cambridge:Cambridge University Press,2010. [9] Uriev E V,Zhukov S V.Investigation on vibration reliability of repair rotors for GTK-25I[J].Journal of Gas Industry,2008,2:77-82.(in Russian) [10] Uriev E V,Shaposhnikov K V.Balancing of the rotors with huge overhangs on the high-speed balancing facilities[J].Heavy Power Machinery,2011,6:14-21.(in Russian) [11] Nelson F D.Rotordynamic without equations[J].International Journal of COMADEM,2007,10(3):2-10. [12] Swanson E,Powell C D,Weissman S.A practical review of rotating machinery critical speeds and modes[J].Journal of Sound and Vibration,2005,5:10-17. [13] Vance J M.Machinery vibration and rotordynamics[M].Hoboken,New Jersey:John Willey & Sons Inc.,2010. [14] Ehrich F F.Handbook of rotordynamics[M].New York:McGraw-Hill Inc.,1992. [15] Uriev E V.Vibration reliability and turbomachinery diagnostic:Part 1 vibration and balancing[M].Yekaterinburg:UGTU-UPI,2005.(in Russian)
点击查看大图
计量
- 文章访问数: 1412
- HTML浏览量: 1
- PDF量: 807
- 被引次数: 0