General transition arcs redesign and multivariable optimization of tenon-mortise joints
-
摘要: 为了得到更加优良的榫齿连接结构形式,降低榫齿连接结构应力集中水平,提高其疲劳强度,研究了双圆弧过渡对榫齿连接结构应力的影响,推导了通用双圆弧过渡的尺寸关系式,为过渡圆弧的改进与优化提供了理论上的支持.通过对二齿涡轮枞树形榫齿连接结构过渡圆弧的改进,并进行了应力评估,证明了双圆弧过渡结构确实能降低结构的应力集中水平.基于Isight软件平台,利用二次序列非线性优化(NLQPL)方法对榫齿连接结构进行了多变量优化,得到了更加优良的结构形式,最大等效应力下降了19.98%.Abstract: In order to obtain a better structure type and reduce stress concentration to achieve better fatigue strength, the dual arcs transition on tenon-mortise joints was examined to find out its influence on stress distribution. Geometric restrictions on dual arcs transition were derived to support design optimization and modifications. Dual arcs transition were employed on two-teeth tenon-mortise joints of turbine disk and the stress assessment on the structure was performed. The dual arcs transition was proved effective in reducing stress concentration and improving structure strength. Multivariable optimization is carried out based on Isight platform using non-linear quadratic programming language (NLQPL) method. Better structural parameters are achieved to reduce stress concentration, and the maximum stress decreases by 19.98%.
-
Key words:
- transition arc /
- tenon /
- mortise /
- multivariable optimization /
- turbine disk
-
[1] 刘长福, 邓明.航空发动机结构分析[M].西安:西北工业大学出版社2006. [2] 郑旭东, 尉夺魁, 王兆丰, 等.某型航空发动机涡轮叶片和轮盘榫齿裂纹故障力学分析[J].航空发动机, 2005, 31(3):35-38. ZEHGN Xudong, YU Duokui, WANG Zhaofeng, et al.Mechanical analysis of crack failures in turbine blade and disk serration of an aero-engine[J].Aeroengine, 2005, 31(3):35-38.(in Chinese) [3] CUI Haitao, MA Haiquan, WEN Weidong.Reliability-based shape optimization of tenon/mortise in aero-engines with contact[J].Chinese Journal of Aeronautics, 2003, 16(4):193-197. [4] 桂康宁.对冷旋压近似椭圆形封头等效代替标准椭圆形封头的浅见[J].金陵石油化工, 1998(2):15-18. [5] 职玉山, 王仲人.三圆弧椭圆封头及其参数优化[J].机械工程师, 1998(2):4-6. [6] 徐倩, 崔海涛.涡轮盘结构的低应力优化设计分析[R].北京:中国航空学会第九届小型发动机学术交流会, 2012. [7] 周正贵.压气机叶片自动优化设计[J].航空动力学报, 2002, 17(3):305-308. ZHOU Zhenggui.Automatic design optimization of compressor blades[J].Journal of Aerospace Power, 2002, 17(3):305-308.(in Chinese) [8] 温卫东, 高德平.榫头/榫槽接触问题边界元分析[J].航空动力学报, 1992, 7(2):117-120, 192. WEN Weidong, GAO Deping.Analysis of tenon and mortise contact problems of boundary element methods[J].Journal of Aerospace Power, 1992, 7(2):117-120, 192.(in Chinese) [9] 方昌德.世界航空发动机手册[M].北京:航空工业出版社, 1996. [10] 《中国航空材料手册》编辑委员会.中国航空材料手册[M].北京:中国标准出版社, 2001. [11] 赵海.涡轮榫头/榫槽结构设计方法研究[D].南京:南京航空航天大学, 2005. ZHAO Hai.Research on design method of turbine tenon/mortise[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2005.(in Chinese) [12] 胡殿印, 彭苗娇, 王荣桥.树脂基复合材料风扇叶片的优化设计[J].航空动力学报, 2012, 27(7):1630-1637. HU Dianyin, PENG Miaojiao, WANG Rongqiao.Optimization design of resin-based composite fan blade[J].Journal of Aerospace Power, 2012, 27(7):1630-1637.(in Chinese) [13] 黄勇.张博林, 薛运锋, 等.UG二次开发与数据库应用基础与典型范例[M].北京:电子工业出版社, 2008. [14] 龚曙光.谢桂兰.黄云清.ANSYS参数化编程与命令手册[M].北京:机械工业出版社, 2009. [15] 赖宇阳.姜欣.Isight参数优化与实例详解[M].北京:北京航空航天大学出版社, 2012. [16] 秦宁京.航空燃气涡轮发动机结构及强度计算[M].北京:北京科学教育编辑室, 1962. [17] 杨兴宇, 阎晓军, 赵福星, 等.某型航空发动机涡轮盘低循环疲劳寿命分析[J].机械强度, 2004, 26(S):229-233. YANG Xingyu, YAN Xiaojun, ZHAO Fuxing, et al.Low cycle fatigue life of an aeroengine gas turbine disk[J].Mechanical Strength, 2004, 26(S):229-233.(in Chinese) [18] 申秀丽, 齐晓东, 王荣桥, 等.航空发动机涡轮榫接结构齿形基本参数研究[J].航空动力学报, 2011, 26(4):735-744. SHEN Xiuli, QI Xiaodong, WANG Rongqiao, et al.Research on the dentiform basic parameters of aero-engine turbine joint structure[J].Journal of Aerospace Power, 2011, 26(4):735-744.(in Chinese)
点击查看大图
计量
- 文章访问数: 1229
- HTML浏览量: 0
- PDF量: 756
- 被引次数: 0