Compensation of springback error in a cold rotary forging method for hypoid gear
-
摘要: 提出一种冷摆辗方案,该方案简化了模具结构,采用局部线接触连续塑性成形.采用位移修正算法构建回弹误差补偿迭代系统,对冷摆辗模具进行修正来降低回弹误差.该系统的特点是首先用修正算法预估下一次冷摆辗假设无回弹时工件的几何形状,然后由冷摆辗模具设计原理推出所需要的新冷摆辗模具.基于弹塑性有限元法基本理论,借助有限元数值模拟技术进行实例验证,分析结果证明:该回弹误差补偿迭代系统只需3次迭代工件误差已经在允许的范围内,因此其可大大的缩短生产周期和成本.Abstract: The authors put forward a cold rotary forging mthod, and the method simplifies the die structure, adopts the local line contact continuous plastic forming. The algorithm of displacement adjustment was used to construct the compensation iteration system of springback error, which was used to correct springback error of the rolling die. The feature of the system was first estimating the workpiece geometry using correction algorithm when the workpiece was assumed no springback, then obtaining the new rolling die with the design principle of rolling die. Based on the basic theory of elastic-plastic finite element method, instance of verification was carried out with the aid of finite element numerical simulation technology. The results of this research confirm the compensation iteration system of springback error just need three iterations to make the workpiece tolerances within the permitted scope, therefore it can greatly shorten the production cycle and cost.
-
[1] 党玉功, 邓效忠, 聂少武, 等.准双曲面齿轮冷摆辗加工新方案及其可行性分析[J].北京工业大学学报, 2013, 39(9):1290-1296. DANG Yugong, DENG Xiaozhong, NIE Shaowu, et al.New scheme of cold rotary forging for hypoid gear and its feasibility[J].Journal of Beijing University of Technology, 2013, 39(9):1290-1296.(in Chinese) [2] 张猛, 胡亚民.摆辗技术[M].北京:机械工业出版社, 1998. [3] 胡亚民, 华林, 赖周艺, 等.汽车摩托车齿轮类零件的冷摆辗精密成形[J].中国机械工程, 2006, 17(10):140-143. HU Yamin, HUA Lin, LAI Zhouyi, et al.The technology of cold precision orbital forming of various gears in automobile and autobicycle[J].China Mechanical Engineering, 2006, 17(10):140-143.(in Chinese) [4] 曾韬.螺旋锥齿轮设计与加工[M].哈尔滨:哈尔滨工业大学出版社, 1989. [5] 张华.四轴联动数控铣齿机变性法加工准双曲面齿轮的理论和实验研究[D].江苏 镇江:江苏大学, 2008. ZHANG Hua.Theory and experiments research of hypoid gear manufacturing with modify-roll method on 4-axis CNC cutting machine[D].Zhenjiang Jiangsu:Jiangsu University, 2008.(in Chinese) [6] 党玉功, 邓效忠, 王斌, 等.准双曲面齿轮冷摆辗加工新方法的数值模拟[J].中国机械工程, 2014, 25(9):1250-1254. DANG Yugong, DENG Xiaozhong, WANG Bin, et al.A new type cold rotary forging method for hypoid gear and its numerical simulation[J].China Mechanical Engineering, 2014, 25(9):1250-1254.(in Chinese) [7] Gan W, Wagoner R H.Die design method for sheet springback[J].International Journal of Mechanical Sciences, 2004, 46(7):1097-1113. [8] Weiher J, Rietman B, Kose K, et al.Controlling springback with compensation strategies[C] //NUMIFORM 2004 Proceedings.Columbus:Ohio State University, 2004:1011-1015. [9] Lingbeek R, Huetink J, Ohnimus S, et al.The development of a finite elements based springback compensation tool for sheet metal metal products[J].Journal of Materials Proceeding Technology, 2005, 169(1):115-125. [10] Karafillis A P, Boyce M C.Tooling and binder design for sheet metal forming processes compensation springback error[J].International Journal of Tool Manufact, 1996, 36(4):503-526. [11] Cheng H S, Cao J, Xia Z C.An accelerated springback compensation method[J].International Journal of Mechanical Sciences, 2007, 49(3):267-279. [12] Webb R D, Hardt D E.A transfer function description of sheet metal forming for process control[J].Journal of Industrial and Engineering Chemistry, 1991, 113(1):44-52. [13] Johnson K L.Contact mechanics[M].Cambridge:Cambridge University Press, 1985. [14] 刘成, 景作军.高强度钢辊弯成型回弹分析[J].新技术新工艺, 2008(10):24-26. LIU Cheng, JING Zuojun.Springback analysis of roll forming for high strength steel[J].New Technology and New Process, 2008(10):24-26.(in Chinese) [15] 邓效忠, 方宗德, 杨宏斌, 等.高重合度弧齿锥齿轮的强度分析[J].航空动力学报, 2002, 17(3):367-372. DENG Xiaozhong, FANG Zongde, YANG Hongbin, et al.Analysis of meshing behavior and experiments of spiral bevel gears with high contact ratio[J].Journal of Aerospace Power, 2002, 17(3):367-372.(in Chinese) [16] 李盛鹏, 方宗德, 张金良, 等.弧齿锥齿轮齿根弯曲应力分析[J].航空动力学报, 2007, 22(5):843-848. LI Shengpeng, FANG Zongde, ZHANG Jinliang, et al.Analysis of tooth root bending stress for spiral bevel gears[J].Journal of Aerospace Power, 2007, 22(5):843-848.(in Chinese) [17] 唐进元, 蒲太平.基于有限元法的螺旋锥齿轮啮合刚度计算[J].机械工程学报, 2011, 6(11):23-29. TANG Jinyuan, PU Taiping.Spiral bevel gear meshing stiffness calculations based on the finite element method[J].Journal of Mechanical Engineering, 2011, 6 (11):23-29.(in Chinese) [18] Faydor L.Litvin gear geometry and applied theory[M].Cambridge:Cambridge University Press, 2004.
点击查看大图
计量
- 文章访问数: 824
- HTML浏览量: 2
- PDF量: 723
- 被引次数: 0