金属丝网橡胶的本构关系

邹广平; 刘泽; 唱忠良; 李雨蕾

doi:10.13224/j.cnki.jasp.2016.10.002

金属丝网橡胶的本构关系

doi: 10.13224/j.cnki.jasp.2016.10.002

1. 哈尔滨工程大学航天与建筑工程学院, 哈尔滨 150001;
2. 中国兵器工业集团公司中国兵器科学研究院宁波分院, 浙江宁波 315103

基金项目:

国家自然科学基金（11372081）

详细信息

作者简介:
邹广平(1963-),男,黑龙江哈尔滨人,教授、博士生导师,博士,主要从事实验力学研究.

中图分类号: V252.1
计量
- 文章访问数: 971
- HTML浏览量: 3
- PDF量: 633
- 被引次数: 0
出版历程
- 收稿日期: 2014-10-30
- 刊出日期: 2016-10-28

Constitutive relation of metal-net rubber

1. College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China;
2. Ningbo Branch of Ordnance Science and Research Academy of China, China North Industries Group Corporation, Ningbo Zhejiang 315103, China

摘要

摘要: 通过对圆环形金属丝网橡胶成型制造过程的分析，在圆环嵌套模型基础上，结合干摩擦非线性理论和小曲梁模型建立了金属丝网橡胶材料的非线性本构关系，对不同相对密度的金属丝网橡胶试件进行了静态压缩实验，通过实验数据确定了本构关系方程的各项系数并实验结果进行比较.研究结果表明：建立的本构关系模型可以很好地描述金属丝网橡胶的非线性力学特性，实验结果能够较好地符合理论结果，并且该模型反映了相对密度、网格大小和网格宽度等参数的影响，从而实现了对材料结构刚度的预估.
- 金属丝网橡胶 /
- 本构关系 /
- 圆环嵌套模型 /
- 非线性力学特性 /
- 静态压缩实验
Abstract: Through analysis of the manufacturing process of the ring metal-net rubber and on the basis of the ring nesting model, in combination with nonlinear theory of dry friction and small curving beam model, the nonlinear constitutive relation of metal-net rubber was constructed, several metal-net rubber components of different relative density were taken on the compression experiment, and the experimental data were used to determine the coefficients on constitutive relation equation and compared with the experimental results. The results show that the model of the stiffness from nonlinear constitutive relation can correctly describe the nonlinear mechanical properties of metal-net rubber, and the theoretic calculations are consistent with the experimental data. The model can reflect the influences of the relative density, mesh size, mesh width and other such parameters, providing a theoretical basis for better design and application of metal-net rubber.
- metal-net rubber /
- constitutive relation /
- ring nesting model /
- nonlinear mechanical properties /
- compression experiment

HTML

参考文献(17)

[1]	李玉龙,何忠波,白鸿柏,等.金属橡胶的研究及应用进展[J].兵器材料科学与工程,2011,34(1):103-108. LI Yulong,HE Zhongbo,BAI Hongbai,et al.Advances in research and application of metal rubber[J].Ordnance Material Science and Engineering,2011,34(1):103-108.(in Chinese)
[2]	MA Yanhong,LIANG Zhichao,WANG Hong,et al.Theoretical and experimental steady-state rotordynamics of an adaptive air film damper with metal rubber[J].Journal of Sound and Vibration,2013,332(22):5710-5726.
[3]	董秀萍,张力.新型材料金属橡胶建模及应用[M].北京:化学工业出版社,2010.
[4]	XIA Hongyu,JIANG Hongyuan,WU Guoqi,et al.Research on the sound absorption performance of metal rubber material[J].Chinese Journal of Acoustics,2009,28(2):154-162.
[5]	YAN Hui,ZHANG Wenjing,JIANG Hongyuan,et al.Energy dissipation of a ring-like metal rubber isolator[J].Chinese Physics B,2014,23(4):202-205.
[6]	马艳红,郭宝亭,朱梓根.金属橡胶材料静态特性的研究[J].航空动力学报,2004,19(3):326-331. MA Yanhong,GUO Baoting,ZHU Zigen.Static characteristics of metal-rubber[J].Journal of Aerospace Power,2004,19(3):326-331.(in Chinese)
[7]	Zhang B,Lang Z Q,Billings S A,et al.System identification methods for metal rubber devices[J].Mechanical Systems and Signal Processing,2013,39(1/2):207-226.
[8]	ZHANG Dayi,MA Yanhong,HONG Jie,et al.Dynamic mechanical behavior of nickel-based superalloy metal rubber[J].Materials and Design,2014,56(4):69-77.
[9]	李雨蕾.金属橡胶减振及密封构件的设计与应用[D].哈尔滨:哈尔滨工程大学,2013. LI Yulei.Design and application on damping and seal member of metal rubber[D].Harbin:Harbin Engineering University,2013.(in Chinese)
[10]	李韶华,杨绍普.滞后非线性模型的研究进展[J].动力学与控制学报,2006,4(1):8-15. LI Shaohua,YANG Shaopu.Research status of hysteretic nonlinear modles[J].Journal of Dynamics and Control,2006,4(1):8-15.(in Chinese)
[11]	梅小龙,赵俊生,张保成,等.压缩长度对金属橡胶减振器刚度的影响[J].噪声与振动控制,2013(1):204-207. MEI Xiaolong,ZHAO Junsheng,ZHANG Baocheng,et al.Effect of compressed length on the stiffness of metal rubber vibration absorber[J].Noise and Vibration Control,2013(1):204-207.(in Chinese)
[12]	郭宝亭,朱梓根,崔荣繁,等.金属橡胶材料的理论模型研究[J].航空动力学报,2004,19(3):314-319. GOU Baoting,ZHU Zigen,CUI Rongfan,et al.Theoretical model of metal-rubber[J].Journal of Aerospace Power,2004,19(3):314-319.(in Chinese)
[13]	马艳红,仝小龙,朱彬,等.金属橡胶热物理性能理论与试验研究[J].物理学报,2013,62(4):048101.1-048101.10. MA Yanhong,TONG Xiaolong,ZHU Bin,et al.Theoretical and experimental investigation on thermophysical properties of metal rubber[J].Acta Physica Sinica,2013,62(4):048101.1-048101.10.(in Chinese)
[14]	切戈达耶夫.金属橡胶构件的设计[M].李中郢,译.北京:国防工业出版社,2000.
[15]	陈艳秋,郭宝亭,朱梓根.金属橡胶减震垫刚度特性及本构关系研究[J].航空动力学报,2002,17(4):416-420. CHEN Yanqiu,GUO Baoting,ZHU Zigen.The investigation of the stiffness characteristics and the stress-strain relation of metal rubber[J].Journal of Aerospace Power,2002,17(4):416-420.(in Chinese)
[16]	彭威,白鸿柏,郑坚,等.金属橡胶材料基于微弹簧组合变形的细观本构模型[J].实验力学,2005,20(3):455-462. PENG Wei,BAI Hongbai,ZHENG Jian,et al.A micromechanics constitutive model of the metal rubber materials based on the radial and axial combined deformation of the microsprings[J].Journal of Expermental Mechanics,2005,20(3):455-462.(in Chinese)
[17]	曹凤利,白鸿柏,任国全,等.金属橡胶恢复力的迟滞模型研究[J].中国机械工程,2014,25(3):311-314. CAO Fengli,BAI Hongbai,REN Guoquan,et al.Research on hysteresis model of restoring force of metal rubber[J].China Mechanical Engineering,2014,25(3):311-314.(in Chinese)