A creep model based on normalized parameters
-
摘要: 针对传统蠕变模型(如Norton律)不能模拟蠕变第3阶段的不足,提出了一种基于归一化参数的蠕变模型,该模型以归一化时间为变量,以归一化应力和归一化温度为参数,可完整描述蠕变曲线的所有3个阶段.在该模型的基础上提出了能更好地描述蠕变曲线第1阶段的改进形式.利用所发展的模型对直接时效GH4169G材料的蠕变试验曲线3个阶段进行了较好地模拟,验证了该模型的描述蠕变变形的能力;同时确立了所发展模型中各参数与归一化温度和归一化应力之间的函数关系,取得了较好的效果;并且能与有限元软件结合,表明所发展的模型可应用于实际结构的蠕变分析.Abstract: In view of the deficiency that the traditional creep models, e.g. the Nortons law, cannot be used to simulate the third stage of creep, a creep model based on normalized time as a variable and the normalized stress and normalized temperature as parameters was presented. The developed model could describe all three stages of the creep curves. On the basis of the developed model, an improved model was put forward to describe the first stage of the creep curves better. Then feasibility of the developed model was validated by use of the experimental data of the direct aged GH4169G.The relationship between the parameters of the developed model and the dimensionless temperature,dimensionless stress was established. And the models can be used in finite element software, showing that the model can be applied to simulate the creep behavior of realistic structure.
-
Key words:
- creep model /
- creep curves /
- normalized parameters /
- the third stage of creep /
- nickel-based superalloy
-
[1] 穆霞英.蠕变力学[M].西安:西安交通大学出版社,1990. [2] Kassner M E,Pérez-Prado M T.Five-power-law creep in single phase metals and alloys[J].Progress in Materials Science,2000,45(1):1-102. [3] 饶寿期.航空发动机的高温蠕变分析[J].航空发动机,2004,30(1):10-13.RAO Shouqi.Analysis of high-temperature creep of aeroengines[J].Aeroengine,2004,30(1):10-13.(in Chinese) [4] YAO Huatang,XUAN Fuzhen,WANG Zhengdong,et al.A review of creep analysis and design under multi-axial stress states[J].Nuclear Engineering and Design,2007,237(18):1969-1986. [5] Kassner M E,Hayes T A.Creep cavitation in metals[J].International Journal of Plasticity,2003,19(10):1715-1748. [6] Sawada K,Tabuchi M,Kimura K.Analysis of long-term creep curves by constitutive equations[J].Materials Science and Engineering:A,2009,510/511:190-194. [7] Sherby O D,Burke P M.Mechanical behavior of crystalline solids at elevated temperature[J].Progress in Materials Science,1968,13:323-390. [8] Swindeman R W,Swindeman M J.A comparison of creep models for nickel base alloys for advanced energy systems[J].International Journal of Pressure Vessels and Piping,2008,85(1):72-79. [9] Miller A K.Modelling of cyclic plasticity with unified constitutive equations:improvements in simulating normal and anomalous Bauschinger effects[J].Journal of Engineering Materials and Technology,1980,102(2):215-222. [10] Chaboche J L.Constitutive equations for cyclic plasticity and cyclic viscoplasticity[J].International Journal of Plasticity,1989,5(3):247-302. [11] Bodner S R,Partom Y.Constitutive equations for elastic-viscoplastic strain-hardening materials[J].Journal of Applied Mechanics,1975,42(2):385-389. [12] Andrade E N da C.On the viscous flow in metals and allied phenomena[J].Proceedings of the Royal Society:A Mathematical,Physical and Engineering Sciences,1910,84(567):1-12. [13] Montes J M,Cuevas F G,Cintas J.New creep law[J].Materials Science and Technology,2012,28(3):377-379. [14] Mukherjee A K,Bird J E,Dorn J E.Experimental correlations for high-temperature creep[J].Transactions of the American Society of Metals,1969,62(1):62-68. [15] 张俊善.材料的高温变形与断裂[M].北京:科学出版社,2007. [16] Golan O,Arbel A,Eliezer D,et al.The applicability of Nortons creep power law and its modified version to a single-crystal superalloy type CMSX-2[J].Materials Science and Engineering:A,1996,216(1/2):125-130. [17] Evans R W,Wilshire B.Creep of metals and alloys[M].London:the Institute of Metals,1985. [18] 刘姣,李振荣,王欣,等.一种GH4169G合金的组织与蠕变行为[J].材料热处理学报,2013,34(8):74-79.LIU Jiao,LI Zhenrong,WANG Xin,et al.Microstructure and creep behavior of a GH4169G superalloy[J].Transactions of Materials and Heat Treatment,2013,34(8):74-79.(in Chinese)
点击查看大图
计量
- 文章访问数: 775
- HTML浏览量: 2
- PDF量: 435
- 被引次数: 0