Probe design for measuring total temperature of combustor outlet based on water cooling
doi: 10.13224/j.cnki.jasp.2018.09.005
Probe design for measuring total temperature of combustor outlet based on water cooling
-
摘要: To obtain the outlet temperature of combustor, a kind of high-temperature and water cooling thermocouple was designed. The main factors affecting the results of thermocouple measurement were analyzed after numerical simulation. Results showed that the high-temperature water cooling thermocouple can achieve high temperature measurement under the condition of 2400K. With the increase of the distance between the water cooling structure and the stagnation cover, the temperature measurement result was more accurate, and the increase in the area ratio of the inlet and outlet of the stagnation cover within a reasonable range can make the measurement results more accurate. The surface emissivity of the measuring point had a great influence on the radiation error. The pressure and flow rate of cooling water can be effectively reduced after adding zirconia coating onto the surface of the rake body.
-
关键词:
- probe /
- total temperature /
- combustion chamber /
- water cooling /
- thermocouple
Abstract: To obtain the outlet temperature of combustor, a kind of high-temperature and water cooling thermocouple was designed. The main factors affecting the results of thermocouple measurement were analyzed after numerical simulation. Results showed that the high-temperature water cooling thermocouple can achieve high temperature measurement under the condition of 2400K. With the increase of the distance between the water cooling structure and the stagnation cover, the temperature measurement result was more accurate, and the increase in the area ratio of the inlet and outlet of the stagnation cover within a reasonable range can make the measurement results more accurate. The surface emissivity of the measuring point had a great influence on the radiation error. The pressure and flow rate of cooling water can be effectively reduced after adding zirconia coating onto the surface of the rake body.-
Key words:
- probe /
- total temperature /
- combustion chamber /
- water cooling /
- thermocouple
-
[1] TONG Xianyi,XU Wei,ZHENG Quan,et al.Design of the gastotal temperaturesensor[J].Journal of Transduction Technology,2016,29(3):301-305.(in Chinese) [2] XU Shunsheng,SHI Zhangming,YANG Gang,et al.Error model and application of temperaturem easure about thermocouple based on heat transfer principle[J].Transducer and Microsystem Technologies,2006,25(5):15-18.(in Chinese) [3] WU Jianhong,ZHAO Jian,WANG Songtao.Non-standard high-temperature thermocouples measurement accuracy factors[J].Metrology and Measurement Technology,2012,32(6):57-59.(in Chinese) [4] LIU Huili,JIA Yunfei,ZENG Qingde,et al.Design of rocket engine sensor[J].Journal of Test and Measurement Technology,2017,31(4).346-351.(in Chinese) [5] LI Yajin,ZHAO Jian,WANG Jianjun.Design of some kinds of combustor airflow high temperature sensors[J].Metrology and Measurement Technology,2014,34(3):36-39.(in Chinese) [6] WANG Xinhua,TENG Ailing,MA Yuzhen,et al.A sensor for high temperature detection[J].Journal of Jinan University(Science and Technology),2005,19(1):51-54.(in Chinese) [7] TONG Xanyi,ZHAO Guochang,SONG Liping,et al.A design scheme of crossbar stagnation hoods[J].China Measurement and Test,2015,41(5):70-74.(in Chinese) [8] PAN Qi,ZHANG Zaojiao.Design and calibration experiment of vertical and horizontal total temperature[J].Aerodynamic Experiment and Measurement and Control,1995,9(1):83-87.(in Chinese) [9] BLACK B F,MOFFAT R J.Design and construction of a low-velocity boundary-layer temperature probe[J].Journal of Heat Transfer,1973,97(2):313-315. [10] BLUST J W,GETZ M G,ZABARNICK S.Probe design optimization for the well stirred reactor[R].Reno,NV:the 35th Aerospace Sciences Meeting and Exhibit,1997. [11] LIU Junhua,DING Shengqun,ZHAO Furong.New high-speed air temperature sensor-semiconductor total temperature probe[J].Journal of Xian Jiaotong University,1987,21(5):73-81.(in Chinese) [12] LIU Liping,XUE Xiusheng,SUN QI,et al.Development and application of high-accuracy water cooled temperature thermocouple[J].Aeroengine,2009,35(4):48-50,62.(in Chinese) [13] YANG Can,WU Weili,XIONG Yibin,et al.Calibration technology of high-temperature thermocouple for combustor exit of an aero-engine[J].Journal of Aerospace Power,2016,31(4):769-774.(in Chinese) [14] LI Feng,BI Lin,PENG Langqing,et al.The design of combustion efficiency sampling-probe in scramjet engine[J].Journal of Jishou University(Natural Science Edition),2006,27(2):43-45.(in Chinese) [15] ZHANG Li,LUO Jianguo,MIN Qi,et al.Error analysis of in-pipe temperature measurement by thermocouple based on heat transfer computation[J].Chinese High Technology Letters,2014,24(7):716-720.(in Chinese) [16] ZHAO Jian,YANG Yongjun,QIN Cunmin,et al.Design of Some kinds of combustor airflow high temperature sensors[J].Metrology and Measurement Technology,2008,28(Sl):26-27.(in Chinese) [17] PEI Guiling.Error analysis and evaluation of uncertainty in the K-type thermocouple test[J].Electronic Science and Technology,2013,26(3):51-53.(in Chinese) [18] JIN Biqing,JIA Demin,LIN Yong,et al.Effect of probe structure on temperature sensitivity of oxygen luminescent sensors[J].Sensor Letters,2009,7(2):160-166.(in Chinese)
点击查看大图
计量
- 文章访问数: 724
- HTML浏览量: 2
- PDF量: 757
- 被引次数: 0