基于位移场的裂纹尖端识别算法

张文东; 李三元; 董登科; 魏玉龙

doi:10.13224/j.cnki.jasp.2018.09.017

基于位移场的裂纹尖端识别算法

doi: 10.13224/j.cnki.jasp.2018.09.017

中国航空工业集团有限公司飞机强度研究所,西安 710065

基金项目: 国家自然科学基金(51601175); 航空基金(2016ZA23011)

计量
- 文章访问数: 756
- HTML浏览量: 4
- PDF量: 612
- 被引次数: 0
出版历程
- 收稿日期: 2017-04-19
- 刊出日期: 2018-09-28

Locating the crack tip algorithm based on displacement field

摘要

摘要: 提出一种基于位移场的裂纹尖端识别算法。首先建立了与裂尖位置有关的目标函数,将裂尖识别问题转化为求解最小值的优化问题；然后在位移场范围内假设裂尖位置,将非线性优化问题转变为线性问题,在给出裂尖的初始假设位置后,通过该裂尖识别算法迭代分析,最终获得裂纹尖端的准确位置。仿真测试表明,该算法6s内通过4步迭代分析就可以得到Ⅰ型裂纹区域的位移场和Ⅰ-Ⅱ混合型裂纹区域的位移场准确的裂尖位置,该方法为裂纹测量技术提供了技术支持,有极大的应用价值。
- 位移场 /
- 裂纹尖端 /
- 应力强度因子 /
- 线性最小二乘法 /
- 迭代分析
Abstract: An algorithm of locating the crack tip based on displacement filed around crack tip was proposed. Give the problem of locating the crack tip,the solution was tured to solving the minimum value by building the objective function including crack tip location firstly. And then the location of crack tips was assumed in a format of mesh, nonlinear optimal problem can be analyzed through a linear least squares approach after an assuming crack tip was chosen. The exact crack tip was gotten by iterative analysis. The results show that this algorithm has converged to the Ⅰ-mode and Ⅰ-Ⅱ mix-mode exact crack tip during four iterative steps in six seconds. The algorithm can provide technical assistance for crack measurement technique and has high engineering values.
- displacement field /
- crack tip /
- stress intensity factor /
- linear least square method /
- iterative analysis

HTML

参考文献(15)

[1]	张蕊，贺玲凤.数字图像相关法测量聚碳酸酯板应力强度因子［J］.工程力学,2012,29(12):22-39. ZHANG Rui,HE Lingfeng.Evaluating stress intensity factor of polycarbonate using digital image correlation［J］.Engineering Mechanics,2012,29(12):22-39.(in Chinese)
[2]	DU Y,DAZ A,BURGUETE R L,et al.Evaluation using digital image correlation of stress intensity factors in an aerospace panel［J］.Experimental Mechanics,2011,51(1):45-57.
[3]	YONEYAMA S,MORIMOTO Y,TAKASHI M.Auto-matic evaluation of mixed-mode stress intensity factors utilizing digital image correlation［J］.Strain,2006,42(1):21-29.
[4]	PACEY M N,JAMES M N,PATTERSON E A.A new photoelastic model for studying fatigue crack closure［J］.Experimental Mechanics,2005,45(1):42-52.
[5]	LOPEZ-CRESPO P,BURGUETE R L,PATTERSON E A,et al.Study of a crack at a fastener hole by digital image correlation［J］.Experimental Mechanics,2009,49(4):551-559.
[6]	ZANGANEH M,LOPEZ-CRESPO P,TAI Y H,et al.Locating the crack tip using displacement field data:a comparative study［J］.Strain,2013,49(2):102-115.
[7]	HARILAL R,VYASARAYANI C P,RAMJIN M.A linear least squares approach for evaluation of crack tip stress field parameters using DIC［J］.Optics and Lasers in Engi-neering,2015,75:95-102.
[8]	MOGADPALLI G P,PARAMESWARAN V.Determina-tion of stress intensity factor for cracks in orthotropic composite materials using digital image correlation［J］.Strain,2008,44(6):446-452.
[9]	SHUKLA A,AGARWAL B,BHUSHAN B.Determina-tion of stress intensity factor in orthotropic composite ma-terials using strain gages［J］.Engineering Fracture Mechanics,1989,32(3):469-477.
[10]	HAMAM R,HILD F,ROUX S.Stress intensity factor gauging by digital image correlation:application in cyclic fatigue［J］.Strain,2007,43(3):181-192.
[11]	LPEZ-CRESPO P,BURGUETE R L,PATTERSON E A,et al.Study of a crack at a fastener hole by digital image correlation［J］.Experimental Mechanics,2009,49(4):551-559.
[12]	MOKHTARISHIRAZABAD M,LOPEZ-CRESPO P,MORENO B,et al.Evaluation of crack-tip fields from DIC data:a parametric study［J］.International Journal of Fatigue,2016,89:11-19.
[13]	CARROLL J,EFSTATHIOU C,LAMBROS J,et al.Investigation of fatigue crack closure using multiscale image correlation experiments［J］.Engineering Fracture Mechanics,2009,76(15):2384-2398.
[14]	YATES J R,ZANGANEH M,TAI Y H.Quantifying crack tip displacement fields with DIC［J］.Engineering Fracture Mechanics,2010,77(11):2063-2076.
[15]	EWALDS H L,WANHILL R.Fracture mechanics［M］.London:Arnold,1984.