基于机匣信号的滚动轴承故障卷积神经网络诊断方法

张向阳; 陈果; 郝腾飞

doi:10.13224/j.cnki.jasp.2019.12.022

基于机匣信号的滚动轴承故障卷积神经网络诊断方法

doi: 10.13224/j.cnki.jasp.2019.12.022

基金项目: 国家自然科学基金(51675263); 国家科技重大专项(2017-Ⅳ-0008-0045); 南京工程学院高层次引进人才科研启动基金(YK201515)

计量
- 文章访问数: 403
- HTML浏览量: 12
- PDF量: 297
- 被引次数: 0
出版历程
- 收稿日期: 2019-05-31
- 刊出日期: 2019-12-28

Convolutional neural network diagnosis method of rolling bearing fault based on casing signal

1.
College of Civil Aviation,Nanjing University of Aeronautics and Astronautics,Nanjing 211106,China
2.
School of Automotive and Rail Transit,Nanjing Institute of Technology,Nanjing 211167,China

摘要

摘要: 针对在滚动轴承故障激励下的机匣微弱故障特征,提出了基于卷积神经网络(CNN)的故障诊断方法。利用矩阵图法、峭度图法以及小波尺度谱法3种振动信号的预处理方法,将一维原始信号转换为图像信号;利用卷积神经网络对故障进行识别。通过比较分析发现:通过连续小波尺度谱更易提取滚动轴承的故障特征,其故障识别率达到95.82%,均高于其他几种振动信号预处理方法;由于卷积神经网络可以利用深层网络结构自适应地提取滚动轴承故障特征,比传统支持向量机(SVM)方法的故障识别率高约7%。结果证明了该方法的有效性与可行性,且具有较好的泛化能力和稳健性。
- 滚动轴承 /
- 机匣信号 /
- 卷积神经网络(CNN) /
- 小波尺度谱 /
- 故障诊断
Abstract: A fault diagnosis method based on convolutional neural network (CNN) was proposed for the weak fault of the engine casing under the rolling bearing fault excitation. The one-dimensional original signal was converted into image signal by using three preprocessing methods: matrix graph method, kurtosis graph method and wavelet scale spectrum. Then the convolutional neural network was used to identify the fault. Through comparative analysis, the fault identification rate of rolling bearing was 95.82%, which was higher than other vibration signal pretreatment methods. At the same time, the fault recognition rate of convolutional neural network was about 7% higher than that of traditional support vector machine (SVM) because it can use deep network structure to extract the fault characteristics of rolling bearing adaptively. The results show that the proposed method is feasible and effective, and has a good generalization ability and robustness.
- rolling bearing /
- casing signal /
- convolutional neural network(CNN) /
- wavelet scale spectrum /
- fault diagnosis

HTML

参考文献(18)

[1]	梅宏斌.滚动轴承振动监测与诊断［M］.北京:机械工业出版社,1995.
[2]	RANDALL R B,ANTONI J.Roling element bearing diagnostics:a tutorial［J］.Mechanical Systems and Signal Procesing,2011,25(2):485-520.
[3]	CHEN Z Q,LI C,SANCHEZ R V.Gearbox fault identification and classification with convolutional neural networks［J］.Shock and Vibration,2015,2015:1-10.
[4]	张全德,陈果,等.基于自组织神经网络的滚动轴承状态评估方法［J］.中国机械工程,2017,28(5):550-558. ZHANG Quande,CHEN Guo,et al.State evaluation method of rolling bearing based on self-organizing neural network［J］.China Mechanical Engineering,2017,28(5):550-558.(in Chinese)
[5]	陈果.滚动轴承早期故障的特征提取与智能诊断［J］.航空学报,2009,30(2):362-367. CHEN Guo.Feature extraction and intelligent diagnosis of early faults in rolling bearings［J］.Acta Aeronautica Sinica,2009,30(2):362-367.(in Chinese)
[6]	SAIDI L,BEN A J,FNAIECH F.Application of higher order spectral features and support vector machines for bearing faults classification［J］.ISA(International Society of Automation) Transactions,2015,54:193-206.
[7]	SOCHER R,HUVAL B,BATH B P,et al.Convolutional-recursive deep learning for 3D object classification［R］.Lake Tahoe,Nevada:Conference and Workshop on Neural Information Processing Systems,2012.
[8]	LECUN Y,BENGIO Y,HINTON G.Deep learning［J］.Nature,2015,521:436-444.
[9]	陈仁祥,杨星,杨黎霞,等.栈式稀疏加噪自编码深度神经网络的滚动轴承损伤程度诊断［J］.振动与冲击,2017,36(21):132-138,144. CHEN Renxiang,YANG Xing,YANG Lixia,et al.Diagnosis of rolling bearing damage degree by stack sparse noise-added self-coded deep neural network［J］.Journal of Vibration and Shock,2017,36(21):132-138,144.(in Chinese)
[10]	雷亚国,贾峰,周昕,等.基于深度学习理论的机械装备大数据健康监测方法［J］.机械工程学报,2015,51(21):49-56. LEI Yaguo,JIA Feng,ZHOU Xin,et al.The big data health monitoring method for mechanical equipment based on deep learning theory［J］.Journal of Mechanical Engineering,2015,51(21):49-56.(in Chinese)
[11]	SUN W,SHAO S,ZHAO R,et al.A sparse auto-encoder-based deep neural network approach for induction motor faults classification［J］.Measurement,2016,89:171-178.
[12]	ZENG X,LIAO Y,LI W.Gearbox fault classification using S-transform and convolutional neural network［R］.Nanjing:International Conference on Sensing Technology,2016.
[13]	李恒,张氢,秦仙蓉,等.基于短时傅里叶变换和卷积神经网络的轴承故障诊断方法［J］.振动与冲击,2018,37(19):132-139. LI Heng,ZHANG Qing,QIN Xianrong,et al.Bearing fault diagnosis method based on short-time Fourier transform and convolutional neural network［J］.Journal of Vibration and Shock,2018,37(19):132-139.(in Chinese)
[14]	JIA F,LEI Y G,LU N,et al.Deep normalized convolutional neural network for imbalanced fault classification of machinery and its understanding via visualization［J］.Mechanical Systems and Signal Processing,2018,110:349-367.
[15]	GUO X,CHEN L,SHEN C.Hierarchical adaptive deep convolution neural network and its application to bearing fault diagnosis［J］.Measurement,2016,93:490-502.
[16]	KRIZHEVSKY A,SUTSKEVER I,HINTON G.Imagenet classification with deep convolutional neural networks［R］.Lake Tahoe,Nevada:Conference and Workshop on Neural Information Processing Systems,2012.
[17]	ANTONI J.Fast computation of the kurtogram for the detection of transient faults［J］.Mechanical Systems and Signal Processing,2007,21(1):108-124.
[18]	程军圣,于德介,杨宇,等.尺度-小波能量谱在滚动轴承故障诊断中的应用［J］.振动工程学报,2004,17(1):82-85. CHENG Junsheng,YU Dejie,YANG Yu,et al.Application of scale-wavelet energy spectrum in fault diagnosis of rolling bearings［J］.Journal of Vibration Engineering,2004,17(1):82-85.(in Chinese)