基于校准箱的低速风洞一体式喷流试验技术

胡卜元; 巫朝君; 吴福章; 章荣平; 刘忠华

doi:10.13224/j.cnki.jasp.2021.06.002

基于校准箱的低速风洞一体式喷流试验技术

doi: 10.13224/j.cnki.jasp.2021.06.002

中国空气动力研究与发展中心低速空气动力研究所,四川绵阳 621000

计量
- 文章访问数: 146
- HTML浏览量: 9
- PDF量: 236
- 被引次数: 0
出版历程
- 收稿日期: 2020-09-16
- 刊出日期: 2021-06-28

Integrated jet-effects testing technique based on calibration tank in low-speed wind tunnel

Low Speed Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang Sichuan 621000,China

摘要

摘要: 为满足大型涡扇动力飞机的喷流试验需求,发展了基于校准箱的低速风洞一体式喷流试验技术。该技术的原理是将试验模型与喷流模拟器融合为一体进行喷流试验,风洞天平同时测量模型的气动力和喷流模拟器的推力,推力通过校准箱校准后从风洞天平测量试验数据中扣除。详细介绍了推力校准及扣除技术、空气桥技术、流量、落压比精确控制技术。为验证该试验技术可靠性,分别在校准箱和FL-13风洞开展了某飞机推力校准试验和全机喷流风洞试验,试验结果表明:推力校准精度优于0.24%,全机喷流试验的阻力系数重复性精度达到0.000 3,满足喷流风洞试验的精度要求。
- 喷流影响 /
- 一体式试验技术 /
- 校准箱 /
- 空气桥 /
- 流量、落压比控制
Abstract: To meet the demand of jet-effects test of large turbine fan aircraft, a kind of integrated jet-effects testing technique based on calibration tank was developed. The testing model and jet simulators were integrated according to the principle of the technique. Aerodynamic forces and thrust were both measured by wind tunnel balance. Thrust was calibrated in calibration tank and deducted from the testing data measured by wind tunnel balance. Techniques such as thrust calibration and deduction, air bridge, mass flow rate and nozzle pressure ratio controlling were introduced. In order to verify the reliability of integrated jet-effects testing technique, a thrust calibration test and a full model jet-effects wind tunnel test were conducted in the calibration tank and FL-13 low speed wind tunnel respectively. The test results indicated that, the calibration testing accuracy of thrust was better than 0.24%, and the repeatability testing accuracy of drag coefficient was 0.000 3, which can meet the accuracy need of jet-effects wind tunnel test.
- jet-effects /
- integrated testing technique /
- calibration tank /
- air bridge /
- mass flow rate and nozzle pressure ratio controlling

HTML

参考文献(17)

[1]	李周复.风洞特种试验技术［M］.北京:航空工业出版社,2010.
[2]	SMITH C L,BERGMANN J C,RIDDLE T R.Current airframe propulsion integration testing techniques at AEDC［R］.AIAA-2004-6819,2004.
[3]	MCWATERS M A.F-35 conventional mode jet-effects testing methodology［R］.AIAA-2015-2404,2015.
[4]	SMITH C L,RIDDLE T R.Jet effects testing considerations for the next generation long range strike aircraft［R］.AIAA-2008-1621,2008.
[5]	王勋年,巫朝君,陈洪,等.战斗机推进系统模拟低速风洞试验技术研究［J］.实验流体力学,2011,25(3):46-49. WANG Xunnian,WU Chaojun,CHEN Hong,et al.Investigation on test technique of fighters with propulsion simulation in a low speed wind tunnel［J］.Journal of Experiments in Fluid Mechanics,2011,25(3):46-49.(in Chinese)
[6]	汤伟,刘李涛,陈洪,等.矢量喷管推力特性的风洞试验技术［J］.航空动力学报,2018,33(4):858-864. TANG Wei,LIU Litao,CHEN Hong,et al.Thrust characteristics test technique of vectoring nozzle in wind tunnel［J］.Journal of Aerospace Power,2018,33(4):858-864.(in Chinese)
[7]	邓祥东,郭大鹏,季军,等.分离形式后体喷流试验技术及阻力修正方法［J］.空气动力学学报,2017,35(6):887-892. DENG Xiangdong,GUO Dapeng,JI Jun,et al.Sleeve-type afterbody jet experiment technique and its drag correction method［J］.Acta Aerodynamica Sinica,2017,35(6):887-892.(in Chinese)
[8]	高静,李聪,杨勇,等.低速风洞推力矢量试验背撑干扰特性试验研究［J］.实验流体力学,2005,19(3):10-14. GAO Jing,LI Cong,YANG Yong,et al.Researches of dorsal support interference in low speed wind tunnel thrust vector test［J］.Journal of Aerospace Power,2005,19(3):10-14.(in Chinese)
[9]	季军,宋孝宇,邓祥东,等.高速风洞一体形式的喷流影响试验技术研究［J］.实验流体力学,2017,31(6):71-77. JI Jun,SONG Xiaoyu,DENG Xiangdong,et al.Research on metric thrust jet-effects testing methodology in high-speed wind tunnel［J］.Journal of Experiments in Fluid Mechanics,2017,31(6):71-77.(in Chinese)
[10]	KOOI J W,HAIJ L,HEGEN G H.Engine simulation with turbofan powered simulators in the German-Dutch wind tunnels［R］.AIAA-2002-2919,2002.
[11]	徐铁军,郝卫东,李聪,等.气动院校准箱工作原理分析及TPS校准目标量的获得方法［J］.流体力学实验与测量,2004,18(4):99-104. XU Tiejun,HAO Weidong,LI Cong,et al.Analysis of operative principles of calibration tank in CARIA and acquired methods of objective parameters in TPS calibration［J］.Experiments and Measurements in Fluid Mechanics,2004,18(4):99-104.(in Chinese)
[12]	巫朝君,胡卜元,李东,等.扁平融合式飞机整体式进/排气试验的推/阻校准方法［J］.实验流体力学,2019,33(5):87-92. WU Chaojun,HU Buyuan,LI Dong,et al.Thrust/drag calibrations for integral inlet and jet testing on a aircraft with blended wing/body［J］.Journal of Experiments in Fluid Mechanics,2019,33(5):87-92.(in Chinese)
[13]	廉筱纯,吴虎.航空发动机原理［M］.西安:西北工业大学出版社,2005:13-16.
[14]	PHLIPSEN I,HOEIJMAKERS H.Improved air-supply line bridges for a DNW-LLF A380 model (RALD 2000)［R］.Darmstadt,Germany:Third International Symposium on Strain Gauge Balances,2002.
[15]	PHLIPSEN I,HOEIJMAKERS H.A new balance and air-return line bridges for DNW-LLF models (B664/RALD 2001)［R］.San Diego,US:4th International Symposium on Strain Gauge Balances,2004.
[16]	章荣平,王勋年,黄勇.低速风洞全模TPS试验空气桥的设计与优化［J］.实验流体力学,2012,26(6):48-52. ZHANG Rongping,WANG Xunnian,HUANG Yong.Design and optimization of the air bridge for low speed full-span TPS test［J］.Journal of Experiments in Fluid Mechanics,2012,26(6):48-52.(in Chinese)
[17]	章荣平,王勋年,黄勇.发动机动力模拟风洞试验中的空气桥技术［J］.航空动力学报,2015,30(4):910-915. ZHANG Rongping,WANG Xunnian,HUANG Yong.Air bridge technology for engine power simulation test in wind tunnel［J］.Journal of Aerospace Power,2015,30(4):910-915.(in Chinese)