带冠预扭涡轮叶片模态分析及动应力测试验证
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

装备预先研究项目(41410010202)


Modal analysis and dynamic stress test verification of shrouded pretwist turbine blade,
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了航空发动机带冠预扭涡轮叶片非线性接触预应力模态分析机理,并以ANSYS软件为平台,对某型涡轴发动机动力涡轮叶片进行了模态分析。结果表明:非线性接触预应力模态分析方法得到的叶片盘9~13节径1阶频率与动应力测试频率在变化规律上保持一致,差别基本稳定在12%~13%,计算精度较传统方法有了明显的提高。

    Abstract:

    The non-linear contact prestress modal analysis mechanism of aero-engine shrouded pretwist turbine blade was introduced. The modal analysis of a turboshaft engine power turbine blade was carried out on the platform of ANSYS software. The results showed that the first order frequencies of 9-13 nodal diameter of blade blisk obtained by non-linear contact prestress modal analysis method were consistent with dynamic stress test frequencies, and the difference was basically stable at about 12%-13%. The results indicate that the calculation accuracy is improved obviously compared with the traditional method.

    参考文献
    相似文献
    引证文献
引用本文

袁巍,陈国智,张红晓.带冠预扭涡轮叶片模态分析及动应力测试验证[J].航空动力学报,2020,35(10):2186~2194. YUAN Wei, CHEN Guozhi, ZHANG Hongxiao. Modal analysis and dynamic stress test verification of shrouded pretwist turbine blade,[J]. Journal Of Aerospace Power,2020,35(10):2186-2194.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-01-07
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-11-04
  • 出版日期:
您是第位访问者
中文版 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司