Load distribution model and experimental validation for APU installation system based on Gap element
WANG Yongfu, ZHU Keyi, LE Meiyu, YI Jinhua
 doi: 10.13224/j.cnki.jasp.20250361
Abstract FullText HTML PDF(6619KB) icon0 icon0
Effect of effusion hole arrangement pattern on combustion liner cooling performance
LI Zelin, LIANG Hongxia, LU Jingxu, ZHANG Siwen, CHEN Runtao, SUO Jianqin
 doi: 10.13224/j.cnki.jasp.20250336
Abstract FullText HTML PDF(11261KB) icon3 icon0
Study on characterization of initial flow of an elliptical jet in crossflow
DONG Yiheng, ZHANG Bin, LYU Keyu, HE Kuai, ZHANG Huanhao, ZHENG Chun
 doi: 10.13224/j.cnki.jasp.20250358
Abstract FullText HTML PDF(11676KB) icon22 icon2
Research progress on axial force measurement technology for aero-engine rotors
BIAN Jie, WANG Siji, LIU Feichun
 doi: 10.13224/j.cnki.jasp.20250197
Abstract FullText HTML PDF(24256KB) icon21 icon1
Theoretical and experimental study on static stability of fully partitioned pocket damper seals
ZHANG Liyun, ZHANG Wanfu, GU Qianlei, LV Xuebin, REN Jie, ZHANG Shidong
 doi: 10.13224/j.cnki.jasp.20240836
Abstract FullText HTML PDF(8130KB) icon10 icon0
Dynamic modeling of IAS for outer raceway spalling in main bearings subjected to time-varying load
WANG Lin, GUO Yu
 doi: 10.13224/j.cnki.jasp.20250213
Abstract FullText HTML PDF(11950KB) icon10 icon1
Experimental testing on influence of aromatic hydrocarbon content on exhaust emission of turboshaft engine
ZI Hailin, ZHAO Teng, HUANG Kaiming, ZHANG Yang, MA Ying, LI Wei, LYU Shiyu
 doi: 10.13224/j.cnki.jasp.20250230
Abstract FullText HTML PDF(3229KB) icon8 icon0
Surge detection and control of cryogenic compressor considering real gas effects
ZHANG Wen, ZHOU Enmin, LEI Pengfei, YAN Yujia
 doi: 10.13224/j.cnki.jasp.20240408
Abstract FullText HTML PDF(1497KB) icon7 icon1
Influence of Alternative Fuels on the main Combustion Performance of RP-3 Aviation Kerosene and its Blended Fuels
LIU Wenjie, CHEN Chunxiang, LIANG Binlan, YU Binbin
 doi: 10.13224/j.cnki.jasp.20250320
Abstract FullText HTML PDF(5760KB) icon16 icon0
More+
2026 No.2
2026 No.1
2025 No.12
Numerical investigation on cooling and mechanical performance of double wall structure
YOU Ruquan, ZOU Yifan, LI Haiwang, ZHANG Dawei
2026, 41(2): 20240172.   doi: 10.13224/j.cnki.jasp.20240172
Abstract FullText HTML PDF(4132KB) icon51 icon8
Multi-parameter coupling effects on atomization characteristics of kerosene jet in swirling crossflow
WANG Bo, HAN Yushan, MIAO Jiaming, REN Guangming
2026, 41(2): 20250300.   doi: 10.13224/j.cnki.jasp.20250300
Abstract FullText HTML PDF(5251KB) icon23 icon1
Analysis method for oxygen volume fraction in inerting process of multi-compartment fuel tanks in civil aircraft
JIANG Hua, XUE Yong, ZHANG Bin
2026, 41(2): 20250369.   doi: 10.13224/j.cnki.jasp.20250369
Abstract FullText HTML PDF(1764KB) icon25 icon4
Experimental study on the composite cooling performance of jet impinging-regenerative channel
LI Yong, ZHANG Jin, ZHOU Qirun, ZHANG Yingchun, YANG Senjie, MA Suxia, XIE Gongnan
2026, 41(2): 20240205.   doi: 10.13224/j.cnki.jasp.20240205
Abstract FullText HTML PDF(9826KB) icon38 icon1
Study on water cooling system performance of aviation piston engines at high altitude
TIAN Yaming, LI Maoqiang, SUN Penghui, WU Yuping
2026, 41(2): 20240300.   doi: 10.13224/j.cnki.jasp.20240300
Abstract FullText HTML PDF(2632KB) icon23 icon1
Effect of thermophysical property of the mainstream on the cooling performance evaluation of gas turbine vane with conjugate heat transfer methods
YANG Dengwen, HUANG Kang, LI Shifeng, HAO Yan, WANG Guoliang, CHENG Zeyuan, QIU Ming
2026, 41(2): 20240198.   doi: 10.13224/j.cnki.jasp.20240198
Abstract FullText HTML PDF(3712KB) icon21 icon3
Blade optimization method considering the gravity center tilting and hot-to-cold relationship
YE Wenming, CHEN Diyun, LI Shifeng, ZHAO Shufan, WANG Guoliang, QIU Ming
2026, 41(2): 20240297.   doi: 10.13224/j.cnki.jasp.20240297
Abstract FullText HTML PDF(2157KB) icon23 icon1
Research on the influence of structural parameters of small slot wide evaporative fuel supply/flame stabilization integrated flameholder on lean ignition and lean blowout performance
MIAO Jianlei, HU Bin, SHI Qiang, ZENG Wen, PEI Ji, ZHAO Qingjun
2026, 41(2): 20230788.   doi: 10.13224/j.cnki.jasp.20230788
Abstract FullText HTML PDF(5214KB) icon23 icon2
Subatmospheric combustion efficiency of the evaporative flameholder under various inflow conditions
YAN Huangbiao, HUANG Yakun, ZHU Zhixiang, HE Xiaomin
2026, 41(2): 20240715.   doi: 10.13224/j.cnki.jasp.20240715
Abstract FullText HTML PDF(6707KB) icon63 icon9
Performance of a micro-mixing single-injector under H2O(g)/CO2/N2 dilution for methane-oxygen combustion
CHEN Xiangnan, MA Kang, WANG Kuanyu, XIE Dingjiang, TANG Yong, SHI Baolu
2026, 41(2): 20240204.   doi: 10.13224/j.cnki.jasp.20240204
Abstract FullText HTML PDF(5996KB) icon43 icon4
Experimental study on flow condensation heat transfer of R134a in serrated mini channel
LI Jie, ZHANG Dalin, ZHAN Hongbo, ZHANG Penglei, ZHU Guangya
2026, 41(2): 20230669.   doi: 10.13224/j.cnki.jasp.20230669
Abstract FullText HTML PDF(2367KB) icon34 icon1
Experimental and numerical simulation researches on supercritical pressure aviation kerosene cooling
LIU Ruihang, SHAN Yong, ZHANG Jingzhou, TAN Xiaoming, LIAN Wenlei
2026, 41(2): 20240401.   doi: 10.13224/j.cnki.jasp.20240401
Abstract FullText HTML PDF(3858KB) icon28 icon2
Evolution of microstructure and elastic modulus of EB-PVD thermal barrier coating induced by sintering
ZHANG Shenyu, WANG Rongqiao, LYU Zhengzhe, ZHAO Yan, LIU Haiyan, HU Dianyin
2026, 41(2): 20240398.   doi: 10.13224/j.cnki.jasp.20240398
Abstract FullText HTML PDF(4099KB) icon27 icon1
Comparison and optimization of sealing performance between O-ring and X-ring rubber seals for SR20 aircraft landing gear shock absorber
TAN Deqiang, GU Yi, JIANG Hao, LIANG Zekai, HE Qiang, HU Yue, WANG Xin
2026, 41(2): 20250274.   doi: 10.13224/j.cnki.jasp.20250274
Abstract FullText HTML PDF(6712KB) icon28 icon2
Aero-engine remaining life prediction model based on improved autoencoder and TFT
TAN Na, GUO Jiaxi, LI Yaohua, SHI Ruibo, HUANG Jinyuhao, LEI Xinran
2026, 41(2): 20240822.   doi: 10.13224/j.cnki.jasp.20240822
Abstract FullText HTML PDF(5801KB) icon63 icon6
Structure design and vibration reduction analysis of a certain type of un-derplatform damper
LYU Qihang, CHEN Cheng, DENG Lijun, ZHOU Zetang, DONG Junshuai, XIE Yuhang, QI Wenkai, ZOU Lijian
2026, 41(2): 20240122.   doi: 10.13224/j.cnki.jasp.20240122
Abstract FullText HTML PDF(2720KB) icon33 icon4
Structural vibration avoidance method of aerospace thin-spoke plate gearing system under “mechanical-inertial-thermal” loads
ZHANG Kecheng, ZHU Jiazan, LIU Huaiju, LU Zehua, WANG Xianliang
2026, 41(2): 20240390.   doi: 10.13224/j.cnki.jasp.20240390
Abstract FullText HTML PDF(12542KB) icon34 icon6
Influence of hydrogen on the microstructure and mechanical properties of TC4ELI titanium alloy
YANG Riming, SHEN Xiuli, DONG Shaojing
2026, 41(2): 20240298.   doi: 10.13224/j.cnki.jasp.20240298
Abstract FullText HTML PDF(11008KB) icon23 icon1
Fatigue life prediction of hole edge structure of installation seat based on improved TCD-SWT model
ZHU Dongchuang, LIU Xiaogang, YU Shengji, PENG Weiping
2026, 41(2): 20240687.   doi: 10.13224/j.cnki.jasp.20240687
Abstract FullText HTML PDF(4219KB) icon82 icon3
Dynamic characteristics of 2.5D woven resin-based composite plates in the hygrothermal environment
TANG Yinsen, CHENG Hanlin, ZHOU Biao, ZHANG Hongjian
2026, 41(2): 20230547.   doi: 10.13224/j.cnki.jasp.20230547
Abstract FullText HTML PDF(4759KB) icon32 icon2
A fatigue life prediction method for composite materials considering interlayer stress
CAO Duanxing, YANG Yang, CHEN Xinwen, ZHU He, LI Shaolin, SHI Duoqi, QI Hongyu
2026, 41(2): 20230644.   doi: 10.13224/j.cnki.jasp.20230644
Abstract FullText HTML PDF(1863KB) icon36 icon1
Transition mode attitude control and optimal tilt angle curve study of quad-tiltrotor
ZHANG Xiayang, HE Yongtao, ZHAO Qijun, FANG Xinzhuoyi
2026, 41(2): 20240197.   doi: 10.13224/j.cnki.jasp.20240197
Abstract FullText HTML PDF(2701KB) icon41 icon5
Cooperative control of aero-engine binary vector nozzle
LI Wentao, YU Duokui, PANG Haoyu, LI Kun, LI Yi, ZHAO Yuexia, ZHANG Lulin, DONG Jiuxiang
2026, 41(2): 20240819.   doi: 10.13224/j.cnki.jasp.20240819
Abstract FullText HTML PDF(4388KB) icon67 icon15
The impact of end-wall fillet on secondary flow losses in a highly-loaded rotor with low aspect ratio and larger camber angle
MA Chaofan, SUI Xiuming, PU Jian, ZHAO Wei, PEI Ji, ZHAO Qingjun
2026, 41(2): 20230652.   doi: 10.13224/j.cnki.jasp.20230652
Abstract FullText HTML PDF(8886KB) icon17 icon1
Energy consumption analysis on fuel system of more-electric engine with bleed air-driven afterburn pump
CHEN Shisiling, WANG Bin
2026, 41(2): 20240396.   doi: 10.13224/j.cnki.jasp.20240396
Abstract FullText HTML PDF(1461KB) icon32 icon4
Effect of tip winglets and blade transition surface modeling on compressor cascade
ZHONG Jingjun, JIA Xinyu, WU Wanyang
2026, 41(2): 20240389.   doi: 10.13224/j.cnki.jasp.20240389
Abstract FullText HTML PDF(7203KB) icon30 icon2
CK-IBNN surrogate model for aerodynamic performance prediction of multi-stage axial flow compressor
HE Youwei, CUI Jiangshuo
2026, 41(2): 20240863.   doi: 10.13224/j.cnki.jasp.20240863
Abstract FullText HTML PDF(5385KB) icon40 icon5
Fault diagnosis method of planetary gearbox based on MobileNetV3-AHFF and MS-HNNE models with fused time-frequency transformations
QI Xiaoli, WANG Zhiwen, YANG Wenhao, CUI Dehai, ZHAO Fangxiang, WANG Zhaojun
2026, 41(2): 20240702.   doi: 10.13224/j.cnki.jasp.20240702
Abstract FullText HTML PDF(2775KB) icon79 icon4
Influence of cage clearance on air curtain effect of angular contact ball bearing
LI Penghua, QIU Ming, GONG Ping, PANG Xiaoxu, ZHU Dingkang, LIU Jiaqi
2026, 41(2): 20250001.   doi: 10.13224/j.cnki.jasp.20250001
Abstract FullText HTML PDF(3356KB) icon147 icon15
Design of three nozzle control plans for aero engines and robustness analysis
HU Qiuchen, CHEN Yuchun, LING Wenhui, HAO Jin
2026, 41(2): 20240859.   doi: 10.13224/j.cnki.jasp.20240859
Abstract FullText HTML PDF(2600KB) icon55 icon7
Mechanism on thermal-strength comprehensive performance enhancement of a novel film hole with rib and ball-shaped dimple
LYU Dong, LIU Yingshi, KONG Xing’ao, SHI Lei, CHEN Yun
2026, 41(1): 20240717.   doi: 10.13224/j.cnki.jasp.20240717
Abstract FullText HTML PDF(5003KB) icon96 icon12
Effects of spurious particle images on CIP-GS cloud measurements in large-scale icing wind tunnel
GUO Xiangdong, GUO Qiling, ZHAO Rong, CHEN Hai, WEI Longtao, WANG Zixu
2026, 41(1): 20240388.   doi: 10.13224/j.cnki.jasp.20240388
Abstract FullText HTML PDF(10798KB) icon35 icon8
Study on flow characteristics and flame structure characteristics of concentric annular recirculation swirl combustor
TANG Wenbin, CHEN Xiang, CAO Tingting, JIN Siqin, LI Wei, YAN Yingwen
2026, 41(1): 20240185.   doi: 10.13224/j.cnki.jasp.20240185
Abstract FullText HTML PDF(20746KB) icon59 icon6
Civil aircraft auxiliary fuel tank fuel transfer thermal effect on the main fuel tank
JIANG Hua, ZHOU Yusui, GUAN Tianlin
2026, 41(1): 20250057.   doi: 10.13224/j.cnki.jasp.20250057
Abstract FullText HTML PDF(1017KB) icon46 icon9
Research on heat flux estimation method based on particle swarm optimi-zation
ZHU Xinxin, WANG Hui, YANG Qingtao, YANG Kai
2026, 41(1): 20240195.   doi: 10.13224/j.cnki.jasp.20240195
Abstract FullText HTML PDF(2734KB) icon45 icon8
RP-3 minimum ignition energy measuring system and spark discharge characteristics
WANG Liqun, LI Yufang, LIU Guannan, FU Ziqi, TAI Huanyu, BAI Wentao
2026, 41(1): 20240689.   doi: 10.13224/j.cnki.jasp.20240689
Abstract FullText HTML PDF(2213KB) icon98 icon9
Combustion enhancement characteristics of supersonic gas-solid two-phase enriched fuel by injector structure
YANG Pengnian, XIA Zhixun, MA Likun, CHEN Binbin, FENG Yunchao, CHEN Xingyuan
2026, 41(1): 20240755.   doi: 10.13224/j.cnki.jasp.20240755
Abstract FullText HTML PDF(23182KB) icon51 icon5
Study on the flow and ignition characteristics of evaporative flameholder under low temperature and pressure conditions
WANG Yusen, CHEN Yuqian, CAO Chunli, WANG Yinhui, HUANG Yue, YOU Yancheng
2026, 41(1): 20250047.   doi: 10.13224/j.cnki.jasp.20250047
Abstract FullText HTML PDF(7278KB) icon54 icon7
Atomization characteristics of centrifugal nozzles in a high-altitude cyclonic air field
YU Tianzhi, LIU Aiguo, LI Hengwen, WANG Peng, WU Kaipi
2026, 41(1): 20240194.   doi: 10.13224/j.cnki.jasp.20240194
Abstract FullText HTML PDF(6708KB) icon68 icon13
Study on heat transfer of the jets from the twin nozzles impinging on a high-speed rotating disk
TANG Miao, LIU Zhengang, LYU Yaguo, LIU Zhenxia, YANG Zhixiong, WU Dingyi
2026, 41(1): 20240184.   doi: 10.13224/j.cnki.jasp.20240184
Abstract FullText HTML PDF(6783KB) icon43 icon4
Near-wall thermophoresis analysis of a charged colloidal particle in aqueous media
WANG Weihao, ZHOU Yi, ZHAO Yugang, BIAN Kun, YANG Shuijin
2026, 41(1): 20240079.   doi: 10.13224/j.cnki.jasp.20240079
Abstract FullText HTML PDF(29851KB) icon47 icon4
Temperature measurement of turbine blade based on visible multispectral radiation
CHEN Xiyue, LEI Qingchun, ZHAO Fei, FAN Wei
2026, 41(1): 20240287.   doi: 10.13224/j.cnki.jasp.20240287
Abstract FullText HTML PDF(3269KB) icon75 icon5
Rotor blade aerodynamic shape optimization based on RBF neural network
WANG Qing, LU Bo, WANG Liangquan
2026, 41(1): 20240182.   doi: 10.13224/j.cnki.jasp.20240182
Abstract FullText HTML PDF(3903KB) icon78 icon5
Calibration method of a high bypass turbofan engine starter assisted air start thermodynamic model
YU Songlin, WANG Yudong, LI Hualei, WU Mingfeng
2026, 41(1): 20240177.   doi: 10.13224/j.cnki.jasp.20240177
Abstract FullText HTML PDF(1748KB) icon65 icon2
Characterization of dynamic flow regulation of rear variable area bypass injector
FENG Ziyi, LI Zhenyao, ZHU Laiyu, HUANG Yue, ZHANG Huiliu, YOU Yancheng
2026, 41(1): 20240387.   doi: 10.13224/j.cnki.jasp.20240387
Abstract FullText HTML PDF(5324KB) icon51 icon3
Analysis of helium cycle control method on the steady-state performance of deeply precooled combined cycle engine
ZHENG Shangzhe, JIA Linyuan, GAO Yuan, TIAN Fang, WANG Yi
2026, 41(1): 20250207.   doi: 10.13224/j.cnki.jasp.20250207
Abstract FullText HTML PDF(1669KB) icon51 icon3
Numerical simulation of subsonic impinging jet flow field characteristics and tone mechanism
LI Hao, JIANG Shujie, ZHANG Rongping, YANG Xiaoquan, LIANG Yuxiang
2026, 41(1): 20240851.   doi: 10.13224/j.cnki.jasp.20240851
Abstract FullText HTML PDF(8209KB) icon130 icon25
Structural design and performance analysis of multi-piezoelectric film wrapped synthetic jet actuators
SONG Lei, HUANG Huanzhen, WANG Wei, FANG Jian
2026, 41(1): 20240713.   doi: 10.13224/j.cnki.jasp.20240713
Abstract FullText HTML PDF(11162KB) icon107 icon7
Perforated Gurney flaps to improve hovering performance of helicopter rotors
WANG Tianjian, HAN Dong, CUI Zhao
2026, 41(1): 20240268.   doi: 10.13224/j.cnki.jasp.20240268
Abstract FullText HTML PDF(4900KB) icon61 icon6
Study on the hydrodynamic characteristics of oil film of squeeze-film damper
XIE Zhongliang, SUN Yihao, HAN Ruiyao, GAO Wenjun, ZHANG Jianbo
2026, 41(1): 20240077.   doi: 10.13224/j.cnki.jasp.20240077
Abstract FullText HTML PDF(2565KB) icon86 icon14
Turbine blade shedding predictive analysis method considering plastic instability criterion
MENG Weihua, ZHANG Zhiyi, LI Jian, LI Lei, LI Wei, LIU He, WANG Cunfu
2026, 41(1): 20240700.   doi: 10.13224/j.cnki.jasp.20240700
Abstract FullText HTML PDF(3321KB) icon83 icon7
Influence of repair parameters on residual thermal stress of composite bonded metal
LIU Peng, WEI Lili, MIAO Chunhe, XUE Xiao, SUN Yungang, XUAN Shanyong, SHAN Yimeng
2026, 41(1): 20240815.   doi: 10.13224/j.cnki.jasp.20240815
Abstract FullText HTML PDF(11525KB) icon55 icon4
Rotational fretting wear characteristic of ball bearings and rotor assemblies based on wear particles analysis
YANG Jinglai, XING Chunsheng, TONG Wenwei, LIU Dongxu, LANG Hong, LIU Mingkun
2026, 41(1): 20240584.   doi: 10.13224/j.cnki.jasp.20240584
Abstract FullText HTML PDF(8019KB) icon82 icon9
Detecting flanged bolt looseness based on multiple modes guided waves
WANG Wenjun, CHENG Jiahui, FAN Yu, LI Lin
2026, 41(1): 20240707.   doi: 10.13224/j.cnki.jasp.20240707
Abstract FullText HTML PDF(14388KB) icon100 icon17
Overspeed simulation of turboshaft engine rotor after shaft fracture based on transient aero-thermo-mechanical network model
MA Qinglin, DING Shuiting, QIU Tian, QI Lei, LIU Chuankai, GAN Chenyu, BAO Shengyu, WANG Xinming
2026, 41(1): 20240158.   doi: 10.13224/j.cnki.jasp.20240158
Abstract FullText HTML PDF(1121KB) icon79 icon4
Modeling method for rotor assembly accuracy considering the separation of center of figure and center of mass
GAO Yue, ZHANG Wei, LIU Meng, SUN Huibin
2026, 41(1): 20240708.   doi: 10.13224/j.cnki.jasp.20240708
Abstract FullText HTML PDF(9115KB) icon66 icon6
Ground direct-connection experiment of a low-thrust magnesium powder water ramjet
CHEN Hong, FANG Xiaobo, LIU Conglin, LIU Changmeng, LI Xianhui, SHAN Yongzhi
2026, 41(1): 20250004.   doi: 10.13224/j.cnki.jasp.20250004
Abstract FullText HTML PDF(4814KB) icon82 icon6
Performance comparison between subsonic and supersonic needle gas valves
HUANG Chujiu, WEI Zhijun, LI Zhiyuan, GAO Ziqing, LI Dalin
2026, 41(1): 20240855.   doi: 10.13224/j.cnki.jasp.20240855
Abstract FullText HTML PDF(3567KB) icon91 icon10
Buzz-saw noise considering blade tip clearance and blade variations
TANG Xiaolong, SONG Heng, YANG Xiaoquan, DING Jue, WENG Peifen
2026, 41(1): 20240150.   doi: 10.13224/j.cnki.jasp.20240150
Abstract FullText HTML PDF(10096KB) icon90 icon10
Structural design and mechanical property experiments of metal rubber support for rotor system
MA Yanhong, TANG Xiangxin, YANG Hai, WANG Yongfeng, HONG Jie
2025, 40(12): 20240692.   doi: 10.13224/j.cnki.jasp.20240692
Abstract FullText HTML PDF(38333KB) icon108 icon15
Gear remaining life prediction based on residual attention TCN and vision transformer
HU Aijun, LI Chenyang, XING Lei, ZHOU Zhuohao, XIANG Ling
2025, 40(12): 20240284.   doi: 10.13224/j.cnki.jasp.20240284
Abstract FullText HTML PDF(2484KB) icon93 icon10
Analysis on service life of metal rubber clamp for natural vibration characteristics of pipe systems
SHI Yan, SUN Zhonghan, LI Wengang, LIU Zhonghua, ZHANG Xufang
2025, 40(12): 20240281.   doi: 10.13224/j.cnki.jasp.20240281
Abstract FullText HTML PDF(3572KB) icon122 icon14
Rolling bearing fault feature extraction method based on feature mode decomposition and adaptive window length sliding window noise reduction
LUAN Xiaochi, GAO Xiang, ZHAO Fengtong, SHA Yundong, YANG Jie, XIA Ao
2025, 40(12): 20240695.   doi: 10.13224/j.cnki.jasp.20240695
Abstract FullText HTML PDF(10272KB) icon130 icon18
Digital twins for dynamic testing of integral bladed disks
ZHOU Biao, XIE Chengyu, BATTIATO G, BERRUTI T M
2025, 40(12): 20240027.   doi: 10.13224/j.cnki.jasp.20240027
Abstract FullText HTML PDF(13632KB) icon234 icon16
Torsion-tension relationship, adhesive performance and vibration experimental research of bolted joints coated with thread locking adhesive
ZHANG Zhongwei, WANG Xingjie, LIU Jianhua, GONG Hao, HUANG Jiayu
2025, 40(12): 20240176.   doi: 10.13224/j.cnki.jasp.20240176
Abstract FullText HTML PDF(2689KB) icon101 icon6
Investigation of strain rate-dependent mechanical model for TC6 titanium alloy
ZHANG Haiyang, LI Xin, YU Duokui, WANG Xiangping, REN Lei, ZHANG Chao
2025, 40(12): 20240072.   doi: 10.13224/j.cnki.jasp.20240072
Abstract FullText HTML PDF(8752KB) icon86 icon8
Decision-level information fusion-based motor fault diagnosis for electric propulsion systems
CAO Jingqi, WANG Yankai, NIE Minghong, WANG Haitao
2025, 40(12): 20240860.   doi: 10.13224/j.cnki.jasp.20240860
Abstract FullText HTML PDF(13432KB) icon196 icon16
Model and study on vibration damping characteristics of squeeze film damper considering static eccentricity
LI Yu, WANG Siji, LI Chuan, WANG Jinhai, TANG Zhenhuan, MI Dong
2025, 40(12): 20240282.   doi: 10.13224/j.cnki.jasp.20240282
Abstract FullText HTML PDF(2644KB) icon76 icon11
Crack fault monitoring of high-speed rotor blades based on non-contact measurement
ZHANG Songlin, QIAO Baijie, WANG Yanan, LIANG Jun, GENG Weimin, LIU Meiru, WEN Bi, CHEN Xuefeng
2025, 40(12): 20240726.   doi: 10.13224/j.cnki.jasp.20240726
Abstract FullText HTML PDF(4142KB) icon339 icon45
Optimization of W-shaped sealing ring structure based on genetic algorithm
WEN Shuaifang, SONG Qinghao, SUN Dan, YANG Zemin, LI Yu, ZHAO Huan, REN Guozhe
2025, 40(12): 20240811.   doi: 10.13224/j.cnki.jasp.20240811
Abstract FullText HTML PDF(2196KB) icon86 icon9
Fracture analysis of turbine rotor blades in an aircraft engine
YANG Mujin, LU Songbing, YANG Dabing, YANG Heli, PAN Pengjie
2025, 40(12): 20240062.   doi: 10.13224/j.cnki.jasp.20240062
Abstract FullText HTML PDF(24817KB) icon112 icon13
Multi-scale full-field strain measurement method based on digital image correlation method
DU Hao, WANG Rongqiao, ZHAO Yan, GUO Jing, HU Dianyin
2025, 40(12): 20240735.   doi: 10.13224/j.cnki.jasp.20240735
Abstract FullText HTML PDF(9138KB) icon279 icon31
Evaluation method of corrosion fatigue residual life of structural parts based on nonlinear ultrasonic detection signals
SU Xianjin, HU Jianhui, LI Shaolin, YANG Xiaoguang, SHI Duoqi, QI Hongyu
2025, 40(12): 20240691.   doi: 10.13224/j.cnki.jasp.20240691
Abstract FullText HTML PDF(3550KB) icon128 icon8
Rolling bearing fault detection based on cyclic spectral coherence of IAS signals
WANG Hongwei, GUO Yu, ZHONG Hui, YANG Xinmin, GAO Guoze
2025, 40(12): 20230497.   doi: 10.13224/j.cnki.jasp.20230497
Abstract FullText HTML PDF(2150KB) icon67 icon9
Experimental study on laminar combustion characteristics of bio-jet fuel
LIU Yu, ZHANG Yuanhang, WANG Jinduo, WANG Peng, MA Hongan, ZENG Wen
2025, 40(12): 20240861.   doi: 10.13224/j.cnki.jasp.20240861
Abstract FullText HTML PDF(2893KB) icon191 icon20
Influence of swirler and flame tube matching on combustion performance
LIU Kai, XU Ruyi, CAO Junhua, ZENG Wen
2025, 40(12): 20240614.   doi: 10.13224/j.cnki.jasp.20240614
Abstract FullText HTML PDF(4884KB) icon161 icon25
Generation of multi-stream uniform droplets based on piezoelectric excitation
CHEN Pengfei, TANG Congcong, DU Mengmeng, LUO Jun, ZHANG Hu
2025, 40(12): 20240274.   doi: 10.13224/j.cnki.jasp.20240274
Abstract FullText HTML PDF(7665KB) icon107 icon12
Improving the film cooling performance on blade suction surface by the endwall jet across regions
ZHAO Changyu, HE Haichao, ZHANG Wei, LIU Song, ZHAO Zhiqi, LI Guangchao
2025, 40(12): 20240080.   doi: 10.13224/j.cnki.jasp.20240080
Abstract FullText HTML PDF(6757KB) icon129 icon6
Experimental study on rotating detonation wave propagation characteristics of subcritical aviation kerosene
XU Guangchuan, CHEN Zheng, WANG Xiaokun, MENG Bowei, MA Hu
2025, 40(12): 20240265.   doi: 10.13224/j.cnki.jasp.20240265
Abstract FullText HTML PDF(9507KB) icon81 icon6
Experimental on detonation wave failure mechanism at near equivalence ratio limits
YANG Rui, ZHANG Qibin, CHEN Qingyun, FAN Wei
2025, 40(12): 20240063.   doi: 10.13224/j.cnki.jasp.20240063
Abstract FullText HTML PDF(8764KB) icon75 icon8
Numerical study on liquid jet breakup characteristics of rectangular nozzles in crossflow
SHAO Meng, HE Zhixia, WANG Qian
2025, 40(12): 20240073.   doi: 10.13224/j.cnki.jasp.20240073
Abstract FullText HTML PDF(3918KB) icon198 icon6
Study on influence of combustor length on lean premixed swirl flame combustion instability
CAI Kaiyuan, FENG Songjiang, CAO Wei, GUO Kangkang, TONG Yiheng, LI Xiaoliang
2025, 40(12): 20240743.   doi: 10.13224/j.cnki.jasp.20240743
Abstract FullText HTML PDF(2934KB) icon230 icon20
Experimental study on effects of fuel distribution on combustion instability boundary of bluff-body flames
ZHAO Hang, LIU Yong, GE Xinkun, ZHANG Xiang, ZHAO Yan
2025, 40(12): 20240841.   doi: 10.13224/j.cnki.jasp.20240841
Abstract FullText HTML PDF(18901KB) icon156 icon11
Flow field measurements for complex swirl spray flames at elevated pressures and temperatures
GAO Jianting, ZHANG Chi, AN Qiang, XUE Xin, TAO Chao, FAN Xingzhou
2025, 40(12): 20230621.   doi: 10.13224/j.cnki.jasp.20230621
Abstract FullText HTML PDF(8843KB) icon100 icon11
Effect of composite cooling medium on the cooling of curved slit film holes
GUO Tairan, LI Li, ZHOU Leping, ZHANG Hui, ZHANG Runsheng, DU Xiaoze
2025, 40(12): 20240068.   doi: 10.13224/j.cnki.jasp.20240068
Abstract FullText HTML PDF(4575KB) icon83 icon4
Effect of endwall movement on aerodynamic performance and tip flow characteristics of tandem diffusion cascades
MAO Xiaochen, DING Zhihua, WANG Yunyu, ZHANG Peng, GAO Limin, LIU Bo
2025, 40(12): 20240737.   doi: 10.13224/j.cnki.jasp.20240737
Abstract FullText HTML PDF(7605KB) icon154 icon19
Flow characteristics of leading edge erosion subsonic airfoil under low Reynolds number condition
SHI Lei, ZHENG Yuxiang, FANG Wenbo, GUO Shuhan, XIONG Jie
2025, 40(12): 20240728.   doi: 10.13224/j.cnki.jasp.20240728
Abstract FullText HTML PDF(5473KB) icon132 icon15
Study on the influence of the labyrinth seal structure on the compressor cascade performance
XU Wenfeng, ZOU Shilong, REN Guozhe, SUN Dan, LU Wenxin
2025, 40(12): 20240075.   doi: 10.13224/j.cnki.jasp.20240075
Abstract FullText HTML PDF(17543KB) icon84 icon8
Experiment of the effect of steady distortion on the stability of an eccentric compressor
MA Shuai, WANG Zhiqiang, HU Jun
2025, 40(12): 20240696.   doi: 10.13224/j.cnki.jasp.20240696
Abstract FullText HTML PDF(24614KB) icon112 icon7
Investigation on stability expansion of low-speed axial-flow compressor stage with controllable speed casing at design speed
SHI Tingyi, WU Wanyang, HU Yi, ZHONG Jingjun
2025, 40(12): 20240623.   doi: 10.13224/j.cnki.jasp.20240623
Abstract FullText HTML PDF(12287KB) icon239 icon13
Research on fast response pressure sensitive paint technology multi-frequency pressure verification system and its application
OUYANG Bo, GAO Limin, LEI Xiangfu, SHI Hang, WANG Lei
2025, 40(12): 20240736.   doi: 10.13224/j.cnki.jasp.20240736
Abstract FullText HTML PDF(5535KB) icon134 icon4
Research on MDOE methods based on response surface optimization model with adaptive genetic algorithm
CHENG Qiyou, LI Chunhua, JIANG Jiawei, HU Lei, CHEN Weixing
2025, 40(12): 20240844.   doi: 10.13224/j.cnki.jasp.20240844
Abstract FullText HTML PDF(3077KB) icon179 icon17
Influence of rigid rotor parameters on longitudinal dynamic stability
CHEN Jinhe, SUO Qian, ZHANG Wei, LI Chunhua, KANG Lei
2025, 40(12): 20240847.   doi: 10.13224/j.cnki.jasp.20240847
Abstract FullText HTML PDF(1641KB) icon126 icon12
Aerodynamics design and off-design condition analysis of1+1/2 counter-rotating turbine
ZHANG Chaowei, WANG Tao, CHI Gen
2025, 40(12): 20240266.   doi: 10.13224/j.cnki.jasp.20240266
Abstract FullText HTML PDF(14744KB) icon96 icon10
Analysis of lift fan system parameter matching and operating characteristics
JIANG Tianmu, ZHANG Xiaobo, WANG Zhanxue, LIU Yongquan, SONG Weifeng
2025, 40(12): 20230789.   doi: 10.13224/j.cnki.jasp.20230789
Abstract FullText HTML PDF(2264KB) icon117 icon7
Design method for mode transition control schedule of turboshaft-turbofan variable cycle engines
YANG Keyu, JIA Linyuan, CHEN Yuchun, REN Cheng, ZHANG Xin
2025, 40(12): 20240697.   doi: 10.13224/j.cnki.jasp.20240697
Abstract FullText HTML PDF(1953KB) icon190 icon13
Study on embedded payload separation by using integrative computation of internal and external flow
ZHOU Yuxuan, XIAO Tianhang, XIONG Qingrong, LI Bo, GUO Jingliang
2025, 40(12): 20240076.   doi: 10.13224/j.cnki.jasp.20240076
Abstract FullText HTML PDF(6715KB) icon88 icon6
Analysis and optimization of splash lubrication characteristics of high speed gear under low temperature conditions
LI Luonan, XU Jianmin, HAN Yong, WANG Pengchuan, YAO Shuan
2025, 40(12): 20240864.   doi: 10.13224/j.cnki.jasp.20240864
Abstract FullText HTML PDF(19215KB) icon281 icon26
Design of full envelop controller for variable cycle engine based on two-degree-of-freedom H∞ control
DONG Yunhui, GUO Yingqing, XU Kejie
2025, 40(12): 20240693.   doi: 10.13224/j.cnki.jasp.20240693
Abstract FullText HTML PDF(2915KB) icon161 icon9
Column
Volume 40 Issue 11 2025
Catalogue Cover Back Cover
Display Method:
【Structure，Strength and Vibration】
Fatigue microcrack initiation mechanism of TC4 alloy based on sampling Moiré method
WANG Qinghua, QI Qi, YAN Xiaojun
2025, 40(11): 20240575.   doi: 10.13224/j.cnki.jasp.20240575
Abstract FullText HTML PDF(17518KB) icon270 icon23
Dynamic characteristics analysis and experimental research of cascade thrust reverser
WANG Xiaoyu, ZHAO Jingchao, MENG Chao, ZHOU Shenghao, LUO Zhong
2025, 40(11): 20240041.   doi: 10.13224/j.cnki.jasp.20240041
Abstract FullText HTML PDF(4955KB) icon222 icon17
Non-synchronous vibration of fan blade
LYU Biao, MENG Weihua, CHEN Jian, ZHANG Peng, HOU Ming
2025, 40(11): 20240601.   doi: 10.13224/j.cnki.jasp.20240601
Abstract FullText HTML PDF(5249KB) icon282 icon28
Analysis on manufacturing factors influencing exhaust window cracking of hollow single crystal turbine blade
LI Qing, CHENG Ronghui, CONG Peihong, MA Shiyan, ZHANG Qian
2025, 40(11): 20240730.   doi: 10.13224/j.cnki.jasp.20240730
Abstract FullText HTML PDF(12097KB) icon274 icon25
Application and prospect of piezoelectric smart structure in vibration and noise reduction of helicopter transmission system
XU Penghang, ZHANG Zongzhi, CHEN Weifang, ZHU Rupeng, LI Miaomiao, ZHU Xinhua, SHE Yixi
2025, 40(11): 20250176.   doi: 10.13224/j.cnki.jasp.20250176
Abstract FullText HTML PDF(36482KB) icon223 icon28
Vibration characteristics of aeroengine spindle direct-drive rotor system with unbalanced magnetic pull
LI Shicai, HAO Long, ZHAO Wei, MA Yingqun, REN Sanqun, ZHAO Qingjun
2025, 40(11): 20240574.   doi: 10.13224/j.cnki.jasp.20240574
Abstract FullText HTML PDF(19536KB) icon238 icon12
Fatigue properties and life prediction of additive manufacturing and solution aging Inconel 718
SUN Chuanwen, SUN Rui, LI Wei
2025, 40(11): 20240570.   doi: 10.13224/j.cnki.jasp.20240570
Abstract FullText HTML PDF(6566KB) icon419 icon31
Dynamic characteristics of active elastic support dry friction dampers-three support flexible rotor system
GAO Xianghong, JIANG Minghong, ZHANG Peng, ZHU Changsheng
2025, 40(11): 20230791.   doi: 10.13224/j.cnki.jasp.20230791
Abstract FullText HTML PDF(3031KB) icon171 icon11
Data-driven engine performance digital twin modeling and interpretability analysis
ZHANG Wei, SUN Jianzhong, YAN Zichen, NIAN Jinchen, TANG Pengfei, WANG Shaohua
2025, 40(11): 20240160.   doi: 10.13224/j.cnki.jasp.20240160
Abstract FullText HTML PDF(6759KB) icon249 icon31
More+
cover

Founded in 1986, monthly

Sponsor: Aviation Industry Corporation of China

Sponsored by: Chinese Society of Aeronautics Beijing University of Aeronautics and Astronautics

ISSN: 1000-8055 CN: 11-2297/V

Elegance of the chief editor

More+

Top View

More+

Virtual Special Issue

More+

Download CenterMore+

Contact Us

Postal Code:102206

Tel:010-61716749

Email:JAP@buaa.edu.cn

Website:http://www.jasp.com.cn

Address:

《Journal of Aerospace Power》

Email Alert RSS

Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

Supported by: Beijing Renhe Information Technology Co., Ltd.