| Citation: | CHEN Xiang-min, YU De-jie*, LI Rong. Compound fault diagnosis method for gearbox based on morphological component analysis and order tracking[J]. Journal of Aerospace Power, 2014, 29(1): 225-232. doi: 10.13224/j.cnki.jasp.2014.01.029
|
| [1] |
张含蕾, 周洁敏, 李刚.基于小波分析的感应电动机复合故障诊断[J].中国电机工程学报, 2006, 26(8):159-162. ZHANG Hanlei, ZHOU Jiemin, LI Gang.Mixed fault diagnosis based on wavelet analysis in induction motors[J].Proceedings of the Chinese Society for Electrical Engineering, 2006, 26(8):159-162.(in Chinese)
|
| [2] |
杨宇, 王欢欢, 程军圣, 等.基于LMD的包络谱特征值在滚动轴承故障诊断中的应用[J].航空动力学报, 2012, 27(5):1153-1158. YANG Yu, WANG Huanhuan, CHENG Junsheng, et al.Application of envelope spectrum characteristics based on LMD to roller bearing fault diagnosis[J].Journal of Aerospace Power, 2012, 27(5):1153-1158.(in Chinese)
|
| [3] |
丁康, 李巍华, 朱小勇.齿轮及齿轮箱故障诊断实用技术[M].北京:机械工业出版社, 2005.
|
| [4] |
Starck J L, Moudden Y, Robin J.Morphological component analysis[J].Proceedings of Society of Photo-optical Instrumentation Engineers, 2005, 5914:5914.1-5914.15.
|
| [5] |
李映, 张艳宁, 许星.基于信号稀疏表示的形态成分分析:进展和展望[J].电子学报, 2009, 37(1):146-152. LI Ying, ZHANG Yanning, XU Xing.Advances and perspective on morphological component analysis based on sparse representation[J].Acta Electronica Sinica, 2009, 37(1):146-152.(in Chinese)
|
| [6] |
Starck J L, Elad M, Donoho D.Redundant multiscale transforms and their application for morphological component separation[J].Advances in Imaging and Electron Physics, 2004, 132(82):287-348.
|
| [7] |
Elad M, Starck J L, Querre P.Simultaneous cartoon and texture image inpainting using morphological component analysis(MCA)[J].Journal on Applied and Computational Harmonic Analysis, 2005, 19(3):340-358.
|
| [8] |
杨杰, 郑海起, 关贞珍, 等.基于形态成分分析的轴承复合故障诊断[J].轴承, 2011(8):38-42. YANG Jie, ZHENG Haiqi, GUAN Zhenzhen, et al.Compound fault diagnosis for bearings based on morphological component annlysis[J].Bearing, 2011(8):38-42.(in Chinese)
|
| [9] |
李辉, 郑海起, 唐力伟.基于改进形态分量分析的齿轮箱轴承多故障诊断研究[J].振动与冲击, 2012, 31(12):135-140. LI Hui, ZHENG Haiqi, TANG Liwei.Bearing multi-fault diagnosis based on improved morphological component analysis[J].Journal of Vibration and Shock, 2012, 31(12):135-140.(in Chinese)
|
| [10] |
Heyns T, Godsill S J, Villiers J P, et al.Statistical gear health analysis which is robust to fluctuating loads and operating speeds[J].Mechanical Systems and Signal Processing, 2012, 27(2):651-666.
|
| [11] |
Borghesani P, Pennacchi P, Randall R B, et al.Order tracking for discrete-random separation in variable speed conditions[J].Mechanical Systems and Signal Processing, 2012, 30(1):1-22.
|
| [12] |
Saavedra P N, Rodriguez C G.Accurate assessment of computed order tracking[J].Shock and Vibration, 2006, 13(1):13-32.
|
| [13] |
郭瑜, 秦树人, 汤宝平, 等.基于瞬时频率估计的旋转机械阶比跟踪[J].机械工程学报, 2003, 39(3):32-36. GUO Yu, QIN Shuren, TANG Baoping, et al.Order tracking of rotating machinery based on instantaneous frequency estimation[J].Chinese Journal of Mechanical Engineering, 2003, 39(3):32-36.(in Chinese)
|
| [14] |
陈向民, 于德介, 罗洁思.基于线调频小波路径追踪阶比循环平稳解调的齿轮故障诊断[J].机械工程学报, 2012, 48(3):95-101. CHEN Xiangmin, YU Dejie, LUO Jiesi.Gear tooth fault diagnosis by using order cyclostationary demodulating approach based on chirplet path pursuit[J].Journal of Mechanical Engineering, 2012, 48(3):95-101.(in Chinese)
|
| [15] |
Chen S S, Donoho D L, Saunders M A.Atomic decomposition by basis pursuit[J].Journal on Scientific Computing, 1998, 20(1):33-61.
|
| [16] |
Mallet S G, Zhang Z F.Matching pursuit with time-frequency dictionaries[J].IEEE Transaction on Signal Processing, 1993, 41(12):3397-3415.
|
| [17] |
Bobin J, Starck J L, Fadili J.Morphological component analysis:an adaptive thresholding strategy[J].IEEE Transaction on Image Processing, 2007, 16(11):2675-2681.
|
| [18] |
GAO Hongye, Bruce A G.Waveshrink and semisoft shrinkage[R].Statistical Science Research Report, No.39, 1995.
|
DownLoad: