| Citation: | XU Fang-cheng, LIU Zhan-sheng, ZHANG Guang-hui, MA Rui-xian. Theory and experiment of foil bearing limiting load capacity based on Coulomb friction effect[J]. Journal of Aerospace Power, 2014, 29(3): 672-681. doi: 10.13224/j.cnki.jasp.2014.03.027
|
| [1] |
Feng K,Kaneko S.Analytical model of bump-type foil bearings using a link-spring structure and a finite-element shell model[J].Journal of Tribology,2010,132(2):021706.1-021706.11.
|
| [2] |
Kim D J,Andron C,Chang S S,et al.Mesoscale foil gas bearings for palm-sized turbomachinery:design,manufacturing,and modeling[J].Journal of Engineering for Gas Turbine and Power,2009,131(4):042502.1-042502.10.
|
| [3] |
Agrawal G L.Foil air/gas bearing technology:an overview[R].ASME Paper 97-GT-347,1997.
|
| [4] |
Walowit J A,Anno J N.Modern developments in lubrication mechanics[M].London:Applied Science Publishers Limited,1975.
|
| [5] |
Heshmat H,Walowit J A,Pinkus O.Analysis of gas-lubricated foil journal bearings[J].Journal of Lubrication Technology,1983,105(4):647-655.
|
| [6] |
Heshmat H,Walowit J A,Pinkus O.Analysis of gas-lubricated complaint thrust bearings[J].Journal of Lubrication Technology,1983,105(4):638-646.
|
| [7] |
Roger K C P,Heshmat H.Compliant foil bearing structural stiffness analysis:Part Ⅰ theoretical model including strip and variable bump foil[J].Journal of Tribology,1992,144(2):394-400.
|
| [8] |
Iordanoff I.Analysis of an aerodynamic compliant foil thrust bearing:method for a rapid design[J].Journal of Tribology,1999,121(4):816-822.
|
| [9] |
Rubio D,Andrés L S.Bump-type foil bearing structural stiffness:experiments and predictions[J].Journal of Engineering for Gas Turbine and Power,2006,128(3):653-660.
|
| [10] |
Salehi M,Heshmat H,Walton J F.Advancements in the structural stiffness and damping of a large compliant foil journal bearing:an experimental study[J].Journal of Engineering for Gas Turbine and Power,2007,129(1):154-161.
|
| [11] |
Conlon M J,Dadouche A,Dmochowski W M,et al.A comparison of the steady-state and dynamic performance of first-and second-generation foil bearings[R].ASME Paper 2010-GT-23683,2010.
|
| [12] |
Rudloff L,Arghir M,Bonneau O,et al.Experimental analyses of a first generation foil bearing:startup torque and dynamic coefficients[J].Journal of Engineering for Gas Turbine and Power,2011,133(3):092501.1-092501.9.
|
| [13] |
Andrés L S,Ryu K,Kim T H.Identification of structural stiffness and enegy dissipation parameters in a second generation foil bearing:effect of shaft temperature[J].Journal of Engineering for Gas Turbine and Power,2011,133(3):032501.1-032501.9.
|
| [14] |
Kim T H,Song J W,Lee Y B,et al.Thermal performance measurement of a bump type gas foil bearing floating on a hollow shaft for increasing rotating speed and static load[J].Journal of Engineering for Gas Turbine and Power,2012,134(2):024501.1-024501.5.
|
| [15] |
Kumar M,Kim D J.Load capacity measurement of hydrostatic bump foil[R].ASME Paper 2009-GT-59286,2009.
|
| [16] |
徐方程, 刘占生, 张广辉,等. 箔片结构库伦摩擦效应对径向箔片轴承特性的影响[J]. 航空动力学报,2013,28(8):1865-1875. XU Fangcheng,LIU Zhansheng,ZHANG Guanghui,et al.Effects of Coulomb friction in foil structure on foil journal bearing performance[J].Journal of Aerospace Power,2013,28(8):1865-1875.(in Chinese)
|
| [17] |
Ruscitto D,Cormick J M,Gray S.Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine:I journal bearing performance[R].NASA CR-135368,1978.
|
| [18] |
Andrés L S,Kim T H.Improvements to the analysis of gas foil bearings integrating of top foil 1D and 2D structural models[R].ASME Paper 2007-GT-27249,2007.
|
DownLoad: