| Citation: | CHANG Le-hao, LIU Geng, ZHENG Ya-ping, DING Yun-fei. A modified method for determining mesh stiffness of gears based on finite element method and elastic contact theory[J]. Journal of Aerospace Power, 2014, 29(3): 682-688. doi: 10.13224/j.cnki.jasp.2014.03.028
|
| [1] |
Vijayakar S M,Busby H R,Houser D R.Linearization of multibody frictional contact problems[J].Computers and Structures,1988,29(4):569-576.
|
| [2] |
方宗德.齿轮轮齿承载接触分析(LTCA)的模型和方法[J].机械传动,1998,22(2):2-4,17,53. FANG Zongde.Model and approach for loaded tooth contact analysis (LTCA) of gear drives[J].Mechanical Transmission,1998,22(2):2-4,17,53.(in Chinese)
|
| [3] |
LI Shuting.Gear contact model and loaded tooth contact analysis of a three-dimensional thin-rimmed gear[J].Journal of Mechanical Design,2002,124(3):511-517.
|
| [4] |
LI Shuting.Effects of machining errors,assembly errors and tooth modifications on loading capacity,load-sharing ratio and transmission error of a pair of spur gears[J].Mechanism and Machine Theory,2007,42(6):698-726.
|
| [5] |
WANG Yanzhong,WU Canhui,GONG Kang,et al.Loaded tooth contact analysis of orthogonal face-gear drives[J].Journal of Mechanical Engineering Science,2012,226(9):2309-2319.
|
| [6] |
Conry T F,Serireg A.A mathematical programming method for design of elastic bodies in contact[J].Journal of Applied Mechanics,1971,6(2):387-392.
|
| [7] |
Conry T F,Seireg A.A mathematical programming technique for the evaluation of load distribution and optimal modification for gear systems[J].Journal of Engineering for Industry,1973,95(11):1115-1122.
|
| [8] |
Vijayakar S M.A combined surface integral and finite element solution for a three-dimensional contact problem[J].International Journal for Numerical Methods in Engineering,1991,31(3):525-545.
|
| [9] |
Parker R G,Vijayakar S M.Non-linear dynamic response of a spur gear pair:modeling and experimental comparisons[J]. Journal of Sound and Vibration,2000,237(3):435-455.
|
| [10] |
Cooley C G,Parker R G,Vijayakar S M.A frequency domain finite element approach for three-dimensional gear dynamics[J].Journal of Vibration and Acoustics,2011,133(8):041004.1-041004.9.
|
| [11] |
LIN Tengjiao,Ou H,LI Runfang.A finite element method for 3D static and dynamic contact/impact analysis of gear drives[J].Computer Methods in Applied Mechanics and Engineering,2007,196(9/10/11/12):1716-1728.
|
| [12] |
刘更.一种确定内啮合和外啮合斜齿圆柱齿轮载荷分布的有效方法[J].机械工程学报,1991,27(3):20-26. LIU Geng.An effective method for determining the load distribution of external and internal helical gears[J].Chinese Journal of Mechanical Engineering,1991,27(3):20-26.(in Chinese)
|
| [13] |
方宗德.斜齿轮齿面柔度矩阵与修形的有限元计算[J].航空动力学报,1994,9(3):242-244. FANG Zongde.Calculation on flexibility matrix and modification of helical gears by FEM[J].Journal of Aerospace Power,1994,9(3):242-244.(in Chinese)
|
| [14] |
王勖成.有限单元法[M].北京:清华大学出版社,2003.
|
| [15] |
Sandwell D T.Biharmonic spline interpolation of GEOS-3 and seasat altimeter data[J].Geophysical Research Letters,1987,14(2):139-142.
|
| [16] |
丁长安,张雷,周福章,等.线接触弹性接触变形的解析算法[J].摩擦学学报,2001,21(2):135-138. DING Changan,ZHANG Lei,ZHOU Fuzhang, et al.Theoretical formula for calculation of line-contact elastic contact deformation[J].Tribology,2001,21(2):135-138.(in Chinese)
|
| [17] |
中华人民共和国航空工业部.HB/Z 84.1-1984航空渐开线圆柱齿轮承载能力一般系数计算[S].北京:中国标准出版社,1986:23-25.
|
| [18] |
卜忠红,刘更,吴立言.斜齿轮啮合刚度变化规律研究[J].航空动力学报,2010,25(4):957-962. BU Zhonghong,LIU Geng,WU Liyan.Research on the variation rules of meshing stiffness of the helical gear[J].Journal of Aerospace Power,2010,25(4):957-962.(in Chinese)
|
DownLoad: