Volume 29 Issue 3
Mar.  2014
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2014  >  29(3): 727-736
WANG Ning-fei, LIU Chang-xiu, WEI Zhi-jun. Review of research on solid fuel regression rate of scramjet combustion[J]. Journal of Aerospace Power, 2014, 29(3): 727-736. doi: 10.13224/j.cnki.jasp.2014.03.034
Citation: WANG Ning-fei, LIU Chang-xiu, WEI Zhi-jun. Review of research on solid fuel regression rate of scramjet combustion[J]. Journal of Aerospace Power, 2014, 29(3): 727-736. doi: 10.13224/j.cnki.jasp.2014.03.034
shu

Review of research on solid fuel regression rate of scramjet combustion

doi: 10.13224/j.cnki.jasp.2014.03.034

  • School of Aerospace Enginering, Beijing Institute of Technology, Beijing 100081, China

  • Received Date: 2013-01-10
  • Publish Date: 2014-03-28
    Abstract
  • The status and progress of solid fuel regression rate in scramjet combustion were elaborated, respectively. The progress and difficulties on regression rate was discussed, including type of solid fuel, combustion configuration, theoretical prediction model, numerical simulation and experimental analysis. The experience and methods from ramjet, thermal protection, insulation ablation can be used in solid fuel scramjet. The following perspectives were proposed: (1) thermal behavior of solid fuel under supersonic flow, heat and mass transfer process should be paid more attention; (2) research on characteristic of regression rate should be explored in depth; (3) the software should be developed and experiments should be conducted systematically. The objective of this work is to provide a reference for research in this field.

     

    • FullText(HTML)
  • loading
    • References(57)
  • [1]
    Billig F S.Tactical missile design concepts[J].Johns Hopkins APL Technical Digest,1983,4(3):139-154.
    [2]
    Vaugth C,Witt M,Netzer D W,et al.Investigation of solid fuel,dual-mode combustion ramjets[J].Journal of Propulsion and Power,1992,8(5):1004-1011.
    [3]
    Northam G,Anderson G Y.Supersonic combustion ramjet research at Langley[R].AIAA 86-0159,1986.
    [4]
    Waltrup P J.Liquid-fueled supersonic combustion ramjet:a research perspective[J].Journal of Propulsion and Power,1987,3(6):515-524.
    [5]
    Billig F S.Research on supersonic combustion[J].Journal of Propulsion and Power,1993,9(4):499-514.
    [6]
    Helmy A.Performance of polycubanes in solid fuel ramjet[R].AIAA 93-2591,1993.
    [7]
    Segal C.Ignition characteristics of a new high-energy density fuel in high-speed flows[J].Journal of Propulsion and Power,1997,13(2):246-249.
    [8]
    Scott C K,Netzer D W.Metallized fuel burning characteristics in the solid fuel ramjet[R].Hampton,US:23rd Joint Army Navy NASA Air Force Combustion Meeting,1986.
    [9]
    Hsieh W H,Peretz A,Huang I T,et al.Combustion behavior of boron-based BAMO/NMMO fuel-rich solid propellants[R].AIAA 89-2884,1989.
    [10]
    Snyder T S,Jarymowycz T A,Hsieh W H,et al.Pyrolysis and combustion of solid fuels under subsonic and supersonic conditions[R].Pasodena,US:26th Joint Army Navy NASA Air Force Combustion Meeting,1989.
    [11]
    Netzer A,Gany A.Burning and flameholding characteristics of a miniature solid fuel ramjet combustor[J].Journal of Propulsion and Power,1991,7(3):357-363.
    [12]
    Lowell D B,Netzer D W.An investigation of the internal ballistics of solid fuel ramjets[D].Monterey,California:Naval Postgraduate School,1973.
    [13]
    Korting P A O G,Van der Geld C W M,Schoyer H F R.Combustion of PMMA in a solid fuel ramjets[R].AIAA 86-1401,1986.
    [14]
    Zvuloni R,Gany A,Levy Y.Geometric reflects on the combustion in solid fuel ramjets[J].Journal of Propulsion and Power,1989,5(1):32-37.
    [15]
    Mady C J,Hickey P J,Netzer D W.Combustion behavior of solid fuel ramjets[J].Journal of Spacecraft and Rockets,1978,15(3):131-132.
    [16]
    Schulte G.Fuel regression and flame stabilization studies of solid fuel ramjets[J].Journal of Propulsion and Power,1986,2(4):301-304.
    [17]
    Netzer D W.Modeling solid fuel ramjet combustion[J].Journal of Spacecraft and Rockets,1977,14(12):762-766.
    [18]
    Milshtein T,Netzer D W.Three-dimensional,primitive-variable model of solid fuel ramjet combustion[J].Journal of Spacecraft and Rockets,1986,23(1):113-117.
    [19]
    Elands P J M,Korting P A O G,Wijchers T,et al.Comparison of combustion experiments and theory in polyethylene solid fuel ramjets[J].Journal of Propulsion and Power,1990,6(6):732-739.
    [20]
    Meinkohn D,Bergmann J W.Experimental investigation of a hydrocarbon solid fuel ramjet[R].Advisory Group for Aerospace Research and Development,1987-CP-307,1987.
    [21]
    Van der Geld C W M,Korting P A O G,Wijchers T.Combustion of PMMA,PE and PS in a ramjet[J].Combustion and Flame,1987,79(3):299-306.
    [22]
    Zvuloni R,Levy Y,Gany A.Investigation of a small solid fuel ramjet combustor[J].Journal of Propulsion and Power,1989,5(3):269-275.
    [23]
    Joulain P,Most J,Sztal B,et al.Theoretical and experimental study of gas-solid combustion in turbulent flow[J].Combustion Science and Technology,1977,15(5/6):225-241.
    [24]
    夏强.固体燃料冲压发动机工作过程研究[D].南京:南京理工大学,2011. XIA Qiang.Investigation on the working progress of solid fuel ramjet[D].Nanjing:Nanjing University of Science and Technology,2011.(in Chinese)
    [25]
    谭建国.固体燃料冲压增程炮弹理论与实验研究[D].长沙:国防科学技术大学,2000. TAN Jianguo.Theoretical and experimental studies of solid fuel ramjet extended range projectile[D].Changsha:National University of Defense Technology,2000.(in Chinese)
    [26]
    向敏.固体燃料冲压增程炮弹工作过程仿真及性能分析研究[D].长沙:国防科学技术大学,2006. XIANG Min.Work process simulation and performance analysis of solid fuel ramjet extended range projectile[D].Changsha:National University of Defense Technology,2006.(in Chinese)
    [27]
    刘巍.固体燃料冲压发动机燃烧组织技术研究[D].长沙:国防科学技术大学,2010. LIU Wei.Research on the combustion technology of solid fuel ramjet[D].Changsha:National University of Defense Technology,2010.(in Chinese)
    [28]
    Witt M.An investigation into the feasibility of solid fuel dual mode ramjet and scramjet propulsion[D].California:Naval Postgraduate School,1989.
    [29]
    Angus W J,Witt M,Laredo D,et al.Solid fuel supersonic combustion[J].La Recherche Aerospatiale,1993(6):1-8.
    [30]
    Ben-Arosh R,Natan B,Spiegler E,et al.The reacting flowfield within a supersonic combustion solid fuel ramjet[R].AIAA 97-3119,1997.
    [31]
    Jarymoxycz T,Yang V,Kuo K.K.A numerical study of solid fuel combustion under supersonic crossflows[R].AIAA 90-2076,1990.
    [32]
    Ben-Yakar,Natan B,Gany A.Investigation of a solid fuel scramjet combustor[J].Journal of Propulsion and Power,1998,14(4):447-455.
    [33]
    Chen Y K,Milos F S.Ablation and thermal analysis program for spacecraft heatshield analysis[J].Journal of Spacecraft and Rockets,1999,36(3):475-483.
    [34]
    Goodman T R.The heat balance integral and its application to problems involving a change of phase[J].Journal of Heat Transfer,1958,80(2):335-342.
    [35]
    Murray A L,Russell G W.Coupled aero heating/ablation analysis for missile configurations[J].Journal of Spacecraft and Rockets,2002,39(4):501-508.
    [36]
    Torre L,Kenny J M,Maffezzoli A M.Degradation behavior of a composite material for thermal protection systems:Part I experimental characterization[J].Journal of Materials Science,1998,33(12):3137-3143.
    [37]
    Jones V,Shukla K N.In-depth response of charring ablators to high temperature environment[R].AIAA 99-3462,1999.
    [38]
    姜贵庆.有加质和化学反应热传导的积分计算[J].宇航学报,1980,1(1):50. JIANG Guiqing.An integral method for caculation heat conduction with mass transfer and chemical reaction[J].Journal of Astronautics,1980,1(1):50.(in Chinese)
    [39]
    徐善玮,侯晓,张宏安.固体火箭发动机内绝热层烧蚀质量损失计算[J].固体火箭技术,2003,26(3):28-31. XU Shanwei,HOU Xiao,ZHANG Hongan.Calculation of internal insulation ablation mass loss of solid fuel motor[J].Journal of Solid Rocket Technology,2003,26(3):28-31.(in Chinese)
    [40]
    蔡体敏.固体火箭发动机工作过程的数值分析[M].西安:西北工业大学出版社,1994.
    [41]
    Chen Y K,Henline W D.Analysis of hypersonic arcjet flow field and surface heating of blunt bodies[R].AIAA 93-0272,1993.
    [42]
    Chen Y K,Henline W D.Chemical nonequilibrium Navier-Stokes solutions for hypersonic flow over an ablating graphite nosetip[R].AIAA 93-2836,1993.
    [43]
    Zabolotskiy V P,Roganov P S.Mathematical modeling of heat and mass transfer on a catalytic wall in flow of high-enthalpy gas[J].Heat Transfer Soviet Research,1985,17(5):117-123.
    [44]
    Torre L,Kenny J M,Maffezzoli A M.Degradation behavior of a composite material for thermal protection systems:Part Ⅲ experimental characterization[J].Journal of Materials Science,2000,35(18):4563-4566.
    [45]
    Storti M.Numerical modeling of ablation phenomena as two-phase Stefan problems[J].International Journal of Heat Mass Transfer,1995,38(15):2843-2854.
    [46]
    Torre L,Kenny J M,Maffezzoli A M.Degradation behavior of a composite material for thermal protection systems:Part Ⅱ process simulation[J].Journal of Materials Science,1998,33(12):3145-3149.
    [47]
    Potts R L.Application of integral methods to ablation charring erosion:a review[J].Journal of Spacecraft and Rockets,1995,32(2):200-209.
    [48]
    Potts R L.Hybrid integral/quasi-steady solution of charring ablation[R].AIAA 90-1677,1990.
    [49]
    Clark R K.An analysis of a charring ablator with thermal nonequilibrium,chemical kinetics,and mass transfer[R].NASA-TN-D-7180,1973.
    [50]
    Katte S S,Das S K,Ventateshan S P.Two-dimensional ablation in cylindrical geometry[J].Journal of Thermal physics and Heat Transfer,2000,14(4):548-556.
    [51]
    何洪庆,严红.EPDM的烧蚀模型[J].推进技术,1999,20(4):36-39. HE Hongqing,YAN Hong.Ablation model of EPDM[J].Journal of Propulsion Technology,1999,20(4):36-39.(in Chinese)
    [52]
    刘伟凯,陈林泉,杨向明.固体燃料超燃冲压发动机燃烧室掺混燃烧数值研究[J].固体火箭技术,2012,35(4):457-462. LIU Weikai,CHEN Linquan,YANG Xiangming.Numerical study of mixing flows in a solid fuel scramjet combustor[J].Journal of Solid Rocket Technology,2012,35(4):457-462.(in Chinese)
    [53]
    杨明,孙波.固体燃料超燃冲压发动机燃烧室的数值仿真[J].兵工自动化,2012,31(1):37-41. YANG Ming,SUN Bo.Numerical simulation of a solid fuel scramjet combustor[J].Ordnance Industry Automation,2012,31(1):37-41.(in Chinese)
    [54]
    陶欢,魏志军,武志文,等.固体燃料超燃冲压发动机燃烧室流动与掺混过程研究[J].飞航导弹,2012(8):75-79.
    [55]
    夏强,武晓松,陈志刚,等.PMMA在固体燃料冲压发动机中燃烧特性的数值模拟[J].固体火箭技术,2011,34(1):43-47. XIA Qiang,WU Xiaosong,CHEN Zhigang,et al.Numerical simulation of combustion characteristic of PMMA in solid fuel ramjet[J].Journal of Solid Rocket Technology,2011,34(1):43-47.(in Chinese)
    [56]
    Cohen-Zur A,Natan B.Experimental investigation of a supersonic combustion solid fuel ramjet[J].Journal of Propulsion and Power,1998,14(6):880-889.
    [57]
    杨向明,刘伟凯,陈林泉,等.固体燃料超燃冲压发动机原理性试验研究[J].固体火箭技术,2012,35(3):319-324. YANG Xiangming,LIU Weikai,CHEN Linquan,et al.Experiment study on the principle of solid fuel scramjet[J].Journal of Solid Rocket Technology,2012,35(3):319-324.(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(956.0KB)
    XML

    Article Metrics

    Article views (2345) PDF downloads(1040) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return