| Citation: | MENG Fei, TIAN Xiao-pei, SHAN Peng. Parametric research on improved Qiu slip factor modelfor centrifugal compressor impellers[J]. Journal of Aerospace Power, 2014, 29(4): 944-952. doi: 10.13224/j.cnki.jasp.2014.04.027
|
| [1] |
舒士甄,朱力,柯玄龄,等.叶轮机械原理[M].北京:清华大学出版社,1991.
|
| [2] |
Stodola A.Steam andgas turbines[M].New York:McGraw-Hill,1927.
|
| [3] |
陈宗华,张亚丁.半开式叶轮离心式压缩机的设计与分析[J].化工设备与防腐蚀,2000(3):3-8.
|
| [4] |
Wiesner F J.A review of slip factors for centrifugal impellers[J].Journal of Engineering for Power,1967,89(4):558-572.
|
| [5] |
Eck B.Fans:design and operation of centrifugal,axialflow,and cross-flow fans[M].Frankfurt,Germany:Pergamon Press,1973.
|
| [6] |
Del Greco A S,Biagi F R,Sassanelli G,et al.A new slip factor correlation for centrifugal impellers in a wide range of flow coefficients and peripheral Mach numbers .ASME Paper GT-2007-27199,2007.
|
| [7] |
Qiu X,Mallikarachchi C,Anderson M.A new slip factor model for axial and radial impellers .ASME Paper GT-2007-27064,2007.
|
| [8] |
田晓沛,单鹏.Qiu滑移模型在小型离心叶轮通流设计中的改进[J].航空动力学报,2010,25(11):2539-2547. TIAN Xiaopei,SHAN Peng.Improvements of Qiu slip factor model applied for quasi-3D through-flow design of small centrifugal impellers[J].Journal of Aerospace Power,2010,25(11):2539-2547.(in Chinese)
|
| [9] |
Qiu X.Analysis and validation of a unified slip factor model for impellers at design and off-design conditions[J]. Journal of Turbomachinery,2011,133(4):041018.1-041018.9.
|
| [10] |
马平,田晓沛,单鹏.离心压气机通流反问题的损失模型研究[J].航空动力学报,2009,24(4):858-866. MA Ping,TIAN Xiaopei,SHAN peng.Loss model application study in the through-flow inverse design approach for centrifugal compressors[J].Journal of Aerospace Power,2009,24(4):858-866.(in Chinese)
|
| [11] |
Tang J,Teemu T S,Reunanen A,et al.Numerical investigation of the effect of tip clearance to the performance of a small centrifugal compressor .ASME Paper GT-2006-90893,2006.
|
| [12] |
NUMECA International.FINETM user manual version 6.2-b [M].Brussels,Belgium:NUMECA International,2004.
|
| [13] |
TIAN Xiaopei,SHAN Peng.A compressible 3-dimensional inverse method based on the streamline curvature approach and Clebsch formulation for radial and mixed flow turbomachines .Anahieim,US:ASME 2012 Power Conference,2012.
|
| [14] |
孟斐.离心压气机一维气动程序改进和通道构形设计 .北京:北京航空航天大学,2011. MENG Fei.Improvement of the one-dimensional centrifugal compressor aerodynamic design program and design on passage configuration .Beijing:Beijing University of Aeronautics and Astronautics,2011.(in Chinese)
|
| [15] |
Krain H,Hoffmann W.Centrifugal impeller geometry and its influence on secondary flows .Advisory Group for Aerspace Research and Development,CP 469,1990.
|
DownLoad: