| Citation: | ZHOU Zhi-xiang, LIU Cun-liang, ZHANG Zong-wei, ZHU Hui-ren, HE Yi-hong. Experiment on effects of mainstream turbulence intensity on film cooling characteristics of turbine vane[J]. Journal of Aerospace Power, 2014, (6): 1279-1286. doi: 10.13224/j.cnki.jasp.2014.06.004
|
| [1] |
Lander R D,Fish R W,Suo M.External heat-transfer distribution on film cooled turbine vanes[J].AIAA Journal of Aircraft,1972,9(10):707-714.
|
| [2] |
Guo S M,Lai C C,Jones T V,et al.Influence of surface roughness on heat transfer and effectiveness for a fully film cooled nozzle guide vane measured by wide band liquid crystals and direct heat flux gages[J].Journal of Turbomachinery,2000,122(3):709-716.
|
| [3] |
Ethridge M I,Cutbirth J M,Bogard D G.Scaling of performance for varying density ratio coolants on an airfoil with strong curvature and pressure gradient effects[J].Journal of Turbomachinery,2001,123(1):231-237.
|
| [4] |
Dittmar J,Schulz A,Wittig S.Adiabatic effectiveness and heat transfer coefficient of shaped film cooling holes on a scaled guide vane pressure side model[J].International Journal of Rotating Machinery,2004,10(5):345-354.
|
| [5] |
刘存良,朱惠人,白江涛,等.涡轮叶片上收缩扩张形孔排的全表面气膜冷却特性研究[J].航空学报,2010,31(4):687-693. LIU Cunliang,ZHU Huiren,BAI Jiangtao,et al.Experimental research on the film cooling characteristics of converging-expanding hole rows on the turbine blade surface[J].Acta Aeronautica et Astronautica Sinica,2010,31(4):687-693.(in Chinese)
|
| [6] |
Bogard D G,Thole K A.Gas turbine film cooling[J].Journal of Propulsion and Power,2006,22(2):249-270.
|
| [7] |
Guo S M,Lai C C,Jones T V,et al.The application of thin-film technology to measure turbine-vane heat transfer and effectiveness in a film-cooled,engine-simulated environment[J].International Journal of Heat and Fluid Flow,1998,19(6):594-600.
|
| [8] |
Colban W,Thole K A,Haendler M.Experimental and computational comparisons of fan-shaped film cooling on a turbine vane surface[J].Journal of Turbomachinery,2007,129(1):23-31.
|
| [9] |
Waye S K,Bogard D G.High-resolution film cooling effectiveness comparison of axial and compound angle holes on the suction side of a turbine vane[J].Journal of Turbomachinery,2007,129(2):202-211.
|
| [10] |
Zhang L,Moon H K.Turbine blade film cooling study:the effects of film hole location on the pressure side.ASME Paper GT2007-27546,2007,
|
| [11] |
Yu Y,Yen C H,Shih T I P,et al.Film cooling effectiveness and heat transfer coefficient distributions around diffusion shaped holes[J].Journal of Heat Transfer,2002,124(4):820-827.
|
| [12] |
刘存良,朱惠人,白江涛,等.基于瞬态液晶全表面测量技术的圆柱形孔气膜冷却特性研究[J].航空动力学报,2009,24(9):1959-1965. LIU Cunliang,ZHU Huiren,BAI Jiangtao,et al.Experimental research on film cooling characteristics of cylindrical hole with transient liquid crystal measurement technique[J].Journal of Aerospace Power,2009,24(9):1959-1965.(in Chinese)
|
| [13] |
韩振兴.热敏液晶测量技术及其在平板气膜冷却实验中的应用.北京:中国科学院,2005. HAN Zhenxing.Liquid crystal thermography and its application in film cooling on flat plate.Beijing:Chinese Academy of Sciences,2005.(in Chinese)
|
| [14] |
徐国强,田宁,陶智,等.液晶测温法对平板气膜冷却的实验研究[J].航空动力学报,2007,22(5):704-708. XU Guoqiang,TIAN Ning,TAO Zhi,et al.Experimental research on flat surface film cooling by TLC[J].Journal of Aerospace Power,2007,22(5):704-708.(in Chinese)
|
| [15] |
Ames F E.Aspects of vane film cooling with high turbulence:Part Ⅰ heat transfer[J].Journal of Turbomachinery,1998,120(4):768-776.
|
| [16] |
Ames F E.Aspects of vane film cooling with high turbulence:Part Ⅱ adiabatic effectiveness[J].Journal of Turbomachinery,1998,120(4):777-784.
|
| [17] |
Drost U,Bolcs A,Hoffs A.Utilization of the transient liquid crystal technique for film cooling effectiveness and heat transfer investigations on a flat plane and a turbine airfoil.ASME Paper 97-GT-026,1997.
|
| [18] |
Wang H P,Olson S J,Goldstein R J,et al.Flow visualization in a linear turbine cascade of high performance turbine blades[J].Journal of Turbomachinery,1997,119(1):1-8.
|
DownLoad: