| Citation: | ZHANG Long, XU Quan-hong, ZHANG Chi, LIN Pei-hua, LIN Yu-zhen. Effect of restricted domain and premixed gas initial temperature on the flame blow-out performance of surface flame on porous media surface[J]. Journal of Aerospace Power, 2014, (6): 1358-1362. doi: 10.13224/j.cnki.jasp.2014.06.014
|
| [1] |
JU Yiguang,Maruta K.Microscale combustion:technology development and fundamental research[J].Progress in Energy and Combustion Science,2011,37(1):669-715.
|
| [2] |
Peirs J,Reynaerts D,Verplaetsen F A.Microturbine for electric power generation[J].Sensors and Actuators A:Physical,2004,113(1):86-93.
|
| [3] |
Waitz I A,Gauba G,Tzeng Y.Combustors for micro gas turbine engines[J].Journal of Fluids Engineering,1998,120(3):109-117.
|
| [4] |
李占科,宋笔锋,宋海龙.微型飞行器的研究现状及其关键技术[J].飞行力学,2003,21(4):1-4. LI Zhanke,SONG Bifeng,SONG Hailong.Study on actualities of micro air vehicles and its key technologies[J].Flight Dynamics,2003,21(4):1-4.(in Chinese)
|
| [5] |
蒋利桥,赵黛青,汪小憨,等.新型低热损失微燃烧器原型的实验研究[J].热能动力工程,2008,23(1):88-91. JIANG Liqiao,ZHAO Daiqing,WANG Xiaohan,et al.Experimental study of a novel miniature-burner prototype with a low heat loss[J].Journal of Engineering for Thermal Energy and Power,2008,23(1):88-91.(in Chinese)
|
| [6] |
London A P,Epstein A H,et al.Microfabrication of a high pressure bipropellant rocket engine[J].Sensor and Actuators,2001,92(1):351-357.
|
| [7] |
Mehra A,Waitz I A,Schmidt M A.Combustion tests in the static structure of a 6-wafer micro gas turbine engine.1999 Solid State Sensor and Actuator Workshop Transducers Conference,1999.
|
| [8] |
Spadaccini C M,Lee J.High power density silicon combustion system for micro gas turbine engines[J].ASME Paper GT-2002-30082,2002.
|
| [9] |
Kim N I,Kato S,Katapla T,et al.Flame stabilization and emission of small Swiss-roll combustors as heaters[J].Combustion and Flame,2005,141(3):229-240.
|
| [10] |
王国锋,钟北京.微细通道中甲烷与氧气的预混燃烧[J].燃烧科学与技术,2006,12(2):97-100. WANG Guofeng,ZHONG Beijing.Methane-oxygen premixed combustion in micro-scale tube[J].Journal of Combustion Science and Technology,2006,12(2):97-100.(in Chinese)
|
| [11] |
李军伟,钟北京.微细直管燃烧器的散热损失研究[J].中国电机工程学报,2007,27(20):59-64. LI Junwei,ZHONG Beijing.Investigation on heat loss of microtube combustor[J].Proceedings of the CSEE,2007,27(20):59-64.(in Chinese)
|
| [12] |
张永生.微尺度燃烧及其热电转化基础研究.杭州:浙江大学,2006. ZHANG Yongsheng.Mechanism study on micro-combustion and thermoelectric transformation.Hangzhou:Zhejiang University,2006.(in Chinese)
|
| [13] |
黄志峰.在管内核心区插入多孔介质实现强化传热的实验与数值研究.武汉:华中科技大学,2010. HUANG Zhifeng.Experimental and numerical studies of enhancing heat transfer in a tube by inserting porous media at the core.Wuhan:Huazhong University of Science and Technology,2010.(in Chinese)
|
| [14] |
王恩宇,程乐鸣,骆仲泱,等.多孔介质中预混火焰猝熄及自稳定性研究[J].热科学与技术,2005,4(1):58-62. WANG Enyu,CHENG Leming,LUO Zhongyang,et al.Quenching and self-stability of premixed flame in porous media[J].Journal of Thermal Science and Technology,2005,4(1):58-62.(in Chinese)
|
| [15] |
Konnov A A,Riemeijer R,Kornilov V N,et al.2D effects in laminar premixed fiames stabilized on a flat flame burner[J].Experimental Thermal and Fluid Science,2013,47(1):1-11.
|
| [16] |
Kim K T,Lee D H,Kwon S.Effects of thermal and chemical surface-flame interaction on flame quenching[J].Combustion and Flame,2006,146(1):19-28.
|
| [17] |
冯耀勋,王勇,蒋利桥,等.预混气温度及多孔材料特性对多孔介质表面火焰的影响[J].中国电机工程学报,2010,30(32):46-52. FENG Yaoxun,WANG Yong,JIANG Liqiao,et al.Effect of temperature of premixed gas and porous wall characteristic on the flames on porous wall surface[J].Proceedings of the CSEE,2010,30(32):46-52.(in Chinese)
|
| [18] |
王勇,蒋利桥,赵黛青,等.多孔介质表面火焰的燃烧特性[J].中国电机工程学报,2009,29(29):67-71. WANG Yong,JIANG Liqiao,ZHAO Daiqing,et al.Combustion characteristics of flames on porous wall surface[J].Proceedings of the CSEE,2009,29(29):67-71.(in Chinese)
|
DownLoad: