| Citation: | LI Chang, XUAN Cheng-ming, HAN Xing, SONG Hua. Mechanism motion reliability calculation method considering correlative multi-failure modes[J]. Journal of Aerospace Power, 2014, (6): 1382-1387. doi: 10.13224/j.cnki.jasp.2014.06.018
|
| [1] |
闫明,张义民,孙志礼.机械零件相关失效可靠度及灵敏度计算的Monte Carlo方法[J].东北大学学报,2011,32(6):835-837. YAN Ming,ZHANG Yimin,SUN Zhili.Monte Carlo method for computing of reliability and sensitivity of mechanical components with dependent failure modes[J].Journal of Northeastern University,2011,32(6):834-837.(in Chinese)
|
| [2] |
喻天翔,宋笔锋.机械零件多失效模式相关可靠度算法研究[J].机械强度,2006,28(4):508-511. YU Tianxiang,SONG Bifeng.Research on calculating the reliability of mechanical component with correlated failure modes[J].Journal of Mechanical Strength,2006,28(4):508-511.(in Chinese)
|
| [3] |
孙志礼,赵乃素.多种失效形式时机械零件的可靠度计算[J].东北工学院学报,1993,14(1):60-63. SUN Zhili,ZHAO Naisu.Reliability calculation of a machine component failed in different modes[J].Journal of Northeast University of Technology,1993,14(1):60-63.(in Chinese)
|
| [4] |
孙志礼,陈良玉.实用机械可靠性设计理论与方法[M].北京:科学出版社,2003.
|
| [5] |
喻天翔.多模式失效的机械零件可靠度计算新理论[J].机械工程学报,2003,39(3):135-137. YU Tianxiang.Reliability computing new theory of mechanical elements with multi failure mode[J].Chinese Journal of Mechanical Engineering,2003,39 (3):134-137.(in Chinese)
|
| [6] |
陈卫平,张云清,任卫群.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社,2005.
|
| [7] |
周金宇,谢里阳,王学敏.失效相关结构系统可靠性分析及近似求解[J].东北大学学报,2004,25(1):74-77. ZHOU Jinyu,XIE Liyang.WANG Xuemin.Approximate method to reliability prediction of failure dependent system[J].Journal of Northeastern University,2004,25(1):74-77.(in Chinese)
|
| [8] |
刘维信.机械可靠性设计[M].北京:清华大学出版社,1995.
|
| [9] |
武清玺.结构可靠性分析及随机有限元法:理论、方法、工程应用及程序设计[M].北京:机械工业出版社,2005.
|
| [10] |
Hassan M.Investigation of high-velocity impact on integral armor using finite element method[J].International Journal Impact Engineering,2004,24(2):203-217.
|
| [11] |
李昌.基于响应面法齿轮啮合传动可靠性灵敏度分[J].航空动力学报,2011,26(3):711-715. LI Chang.Analysis of reliability sensitivity for gear engagement based on response surface methods[J].Journal of Aerospace Power,2011,26(3):711-715.(in Chinese)
|
| [12] |
李昌,韩兴,孙志礼.基于机构运动精度可靠性虚拟实验方法研究[J].机械设计,2007,24(11):17-20. LI Chang,HAN Xing,SUN Zhili.Reliability virtual test of mechanism motion accuracy[J].Journal of Machine Design,2007,24(11):17-20.(in Chinese)
|
| [13] |
郑建荣.ADAMS—虚拟样机技术入门与提高[M].北京:机械工业出版社,2002.
|
| [14] |
Merlet J P,Daney D.Dimensional synthesis of parallel robots with a guaranteed given accuracy over a specific workspace//Proceeding of the 2002 IEEE International Conference on Robotics & Automation.Barcelona,Spain:IEEE,2005:942-947.
|
| [15] |
安伟光,蔡荫林.随机结构系统可靠性分析与优化设计[M].哈尔滨:哈尔滨工程大学出版社,2005.
|
| [16] |
李永东.某型坦克齿轮接触疲劳强度可靠性的Monte Carlo数值模拟[J].机械强度,2006,28(1):46-50. LI Yongdong.Monte Carlo numerical modeling of a tank gear's contact fatigue strength reliability[J].Journal of Mechanical Strength,2006,28(1):46-50.(in Chinese)
|
| [17] |
朱文予.机械可靠性设计[M].上海:上海交通大学出版社,1992.
|
| [18] |
侯红玲,赵永强,魏伟峰.基于ADAMS的平面连杆机构运动分析与仿真[J].机械,2005(1):33-35. HOU Hongling,ZHAO Yongqiang,WEI Weifeng.Dynamic analysis and simulation of the planar linkage in ADAMS[J].Mechanic,2005(1):33-35.(in Chinese)
|
DownLoad: