| Citation: | LI Yang, DENG Hai-shun, WANG Xiao-lei. Experiment on friction and wear performance of textured port plate pair[J]. Journal of Aerospace Power, 2014, (7): 1591-1597. doi: 10.13224/j.cnki.jasp.2014.07.011
|
| [1] |
杨华勇,艾青林,周华.轴向柱塞泵配流副润滑特性的研究进展[J].中国机械工程,2004,15(17):1587-1593. YANG Huayong,AI Qinglin,ZHOU Hua.Development of lubrication of port plate/cylinder block in axial piston pump[J].China Mechanical Engineering,2004,15(17):1587-1593.(in Chinese)
|
| [2] |
周元康,罗述洁,刘盛.N+注入改性的25Cr3MoA材料在轴向柱塞泵配流盘上的应用研究[J].贵州工业大学学报:自然科学版,1998,27(5):50-54. ZHOU Yuankang,LUO Shujie,LIU Sheng.The applied research of 25Cr3MoA modified by N+ implantation in the valve plate of pump[J].Journal of Guizhou University of Technology:Natural Science Edition,1998,27(5):50-54.(in Chinese)
|
| [3] |
Lee S Y,Kim S D,Hong Y S.Application of the duplex TiN coatings to improve the tribological properties of electro hydrostatic actuator pump parts[J].Surface and Coatings Technology,2005,193(1/2/3):266-271.
|
| [4] |
Hong Y S,Lee S Y.A comparative study of Cr-X-N (X=Zr,Si)coatings for the improvement of the low-speed torque efficiency of a hydraulic piston pump[J].Metals and Materials International,2008,14(1):33-40.
|
| [5] |
何必海,孙健国,叶志锋.燃油柱塞泵滑靴副和配流副油膜计算研究[J].航空动力学报,2010,25(6):1437-1442. HE Bihai,SUN Jianguo,YE Zhifeng.Calculation and analysis of film thickness for slipper pair and valve plate pair in fuel piston pump[J].Journal of Aerospace Power,2010,25(6):1437-1442.(in Chinese)
|
| [6] |
Bergada J M,Kumar S,Davies D L,et al.A complete analysis of axial piston pump leakage and output flow ripples[J].Applied Mathematical Modelling,2012,36(4):1731-1751.
|
| [7] |
王彬.轴向柱塞泵平面配流副的润滑特性及其参数优化 .杭州:浙江大学,2009. WANG Bin.Lubrication characteristics and parameter optimization of plane block-port plate pair in axial piston pump[D]. Hangzhou:Zhejiang University,2009.(in Chinese)
|
| [8] |
Hamilton D B,Walowit J A,Allen C M.A theory of lubrication by micro-irregularities[J].Journal of Basic Engineering,1966,88(1):177-185.
|
| [9] |
WANG Xiaolei,Kato K,Adachi K.The lubrication effect of micro-pits on parallel sliding faces of SiC in water[J].Tribology Transactions,2002,45(3):294-301.
|
| [10] |
ZHANG Bo,HUANG Wei,WANG Xiaolei.Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties[J].Journal of Engineering Tribology,2012,226(8):705-713.
|
| [11] |
Wakuda M,Yamauchi Y,Kanzaki S,et al.Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact[J].Wear,2003,254(3/4):356-363.
|
| [12] |
Bolander N W,Sadeghi F.Surface modification for piston ring and liner[R].Netherlands:International Union of Theoretical and Applied Mechanics Symposium on Elastohydrodynamics and Micro-elastohydrodynamics,2006.
|
| [13] |
Ogihara H,Kido T,Yamada H,et al.Technology for reducing engine rubbing resistance by means of surface improvement[J].Honda Research and Development Technical Review,2000,12(2):93-98.
|
| [14] |
Marian V G,Gabriel D,Knoll G,et al.Theoretical and experimental analysis of a laser textured thrust bearing[J].Tribology Letters,2011,44(3):335-343.
|
| [15] |
Etsion I,Halperin G,Brizmer V,et al.Experimental investigation of laser surface textured parallel thrust bearings[J].Tribology Letters,2004,17(2):295-300.
|
| [16] |
Etsion I.Improving tribological performance of mechanical components by laser surface texturing[J].Tribology Letters,2004,17(4):733-737.
|
| [17] |
邓海顺,于海武,王晓雷.轴向柱塞泵配流副低压区织构化试验研究[J].华中科技大学学报:自然科学版,2012,40(6):16-19. DENG Haishun,YU Haiwu,WANG Xiaolei.Study on tribological performance of textured port plate of axial piston pump[J].Journal of Huazhong University of Science and Technology:Natural Science Edition,2012,40(6):16-19.(in Chinese)
|
| [18] |
邓海顺,祁胜,于海武,等.轴向柱塞泵配流副低压区织构化数值分析[J].农业机械学报,2011,42(6):203-207. DENG Haishun,QI Sheng,YU Haiwu,et al.Numerical analysis for textured port plate of axial piston pump[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(6):203-207.(in Chinese)
|
DownLoad: