| Citation: | QIN Zhao-ju, ZHANG Wei-zheng, SONG Li-ye, YUAN Yan-peng. Investigations on ablation failure of high power pistons[J]. Journal of Aerospace Power, 2014, 29(9): 2150-2156. doi: 10.13224/j.cnki.jasp.2014.09.019
|
| [1] |
刘震涛,王斌,伍茜,等.USB摄像头在活塞热疲劳试验台中的应用[J].车用发动机,2006(5):55-57. LIU Zhentao,WANG Bin,WU Qian,et al.Application of USB camera in the piston thermal fatigue test[J].Vehicle Engine,2006(5):55-57.(in Chinese)
|
| [2] |
希特凯.内燃机的传热和热负荷[M].马重芳,宋家林,马庆芳,等译.北京:中国农业出版社,1981.
|
| [3] |
刘畅.铝合金活塞疲劳寿命预测与强化设计技术研究[D].北京:北京理工大学,2011. LIU Chang.Research on fatigue life prediction and enhanced design technology of aluminum alloy piston[D].Beijing:Beijing Institute of Technology,2011.(in Chinese)
|
| [4] |
吕德生,宋桂明,周玉,等.航天飞行器防热部件烧蚀行为的数值模拟[J].固体火箭技术,2002,25(2):67-69. LV Desheng,SONG Guiming,ZHOU Yu,et al.Numerical simulation of ablation behavior of spacecraft thermo-resistance components[J].Journal of Solid Rocket Technology,2002,25(2):67-69.(in Chinese)
|
| [5] |
杨飒,何国强,李江,等.碳化层疏松/致密结构的三元乙丙烧蚀模型[J].航空动力学报,2012,27(5):1172-1178. YANG Sa,HE Guoqiang,LI Jiang,et,al.EPDM ablation model considering of porous/compact structure of charring layer[J].Journal of Aerospace Power,2012,27(5):1172-1178.(in Chinese)
|
| [6] |
Phipps C R,TurnerT P,Harrison R F,et al.Impulse coupling to targets in vacuum by KrF,HF,and CO2 single-pulse lasers[J].Journal of Applied Physics,1988,64(3):1083-1096.
|
| [7] |
Nolte S,Momma C,Jacobs H.et al.Ablation of metals by ultrashort laser pulses[J].Journal of the Optical Society of America:B,1997,14(10):2716-2722.
|
| [8] |
张晓光,刘宇,王长辉.双脉冲固体发动机喷管传热烧蚀特性[J].航空动力学报,2012,27(6):1391-1397. ZHANG Xiaoguang,LIU Yu,WANG Changhui.Characterization of nozzle thermal and ablation response in dual-pulse solid rocket motors[J].Journal of Aerospace Power,2012,27(6):1391-1397.(in Chinese)
|
| [9] |
Carmicino C,Sorge A R.Role of injection in hybrid rockets regression rate behavior[J].Journal of Propulsion and Power,2005,21(4):606-612.
|
| [10] |
吴兆春.金属表面烧蚀速率与表面加热功率关系的探讨[J].兵工学报,2005,26(4):505-509. WU Zhaochun.Relation between ablating rate and surface heating power[J].Acta Armamentarii,2005,26(4):505-509.(in Chinese)
|
| [11] |
王晓东.短脉冲及超短脉冲激光对金属的烧蚀及微加工研究[D].武汉:华中科技大学,2009. WANG Xiaodong.Ablation and micromachining of metals with short and ultra-short laser pulses[D].Wuhan:Huazhong University of Science and Technology,2009.(in Chinese)
|
| [12] |
Scholz T,Dickmann K,Uphoff H,et al.Influence of the interaction between nanoparticles and high brilliant laser radiation during μs-pulses on the ablation process of metals[J].Optics and Lasers in Engineering,2012,50(5):717-726.
|
| [13] |
Castelo A,Nieto D,Bao C,et al.Laser backwriting process on glass via ablation of metal targets[J].Optics Communications,2007,273(1):193-199.
|
| [14] |
Pekker L,Gimelshein N,Gimelshein S.Analytical and kinetic modeling of ablation process[J].Journal of Thermophysics and Heat Transfer,2009,23(3):473-478.
|
| [15] |
梁华.冲压发动机补燃室内绝热层传热烧蚀特性研究[D].南京:南京理工大学,2009. LIANG Hua.Research on characteristic of heat transfer and ablation of insulation in the solid rocket ramjet chamber[D].Nanjing:Nanjing University of Science and Technology,2009.(in Chinese)
|
| [16] |
吴兆春,刘英学,苑安民.恒热流加热条件下烧蚀过程的解[J].机械工程学报,2007,43(2):76-80. WU Zhaochun,LIU Yingxue,YUAN Anmin.Approximate theoretic solution for ablation process heated on condition of constant heat flux[J].Chinese Journal of Mechanical Engineering,2007,43(2):76-80.(in Chinese)
|
| [17] |
谭建松,俞小莉.高强化发动机活塞冷却方式仿真[J].兵工学报,2006,27(1):97-100. TAN Jiansong,YU Xiaoli.The simulation for cooling method of piston in high-duty engine[J].Acta Armamentarii,2006,27(1):97-100.(in Chinese)
|
| [18] |
白敏丽,丁铁新,吕继组.活塞组-气缸套耦合传热模拟[J].内燃机学报,2005,23(2):168-175. BAI Minli,DING Tiexin,LV Jizu.Simulation study on coupled heat transfer for piston set-cylinder liner[J]. Transactions of CSICE,2005,23(2):168-175.(in Chinese)
|
DownLoad: