Volume 29 Issue 9
Sep.  2014
Turn off MathJax
Article Contents
BAI Guo-qiang, CHANG Hai-ping. Effect of angle between lamilloy and rotation axis on heat transfer capability of limited lamilloy[J]. Journal of Aerospace Power, 2014, 29(9): 2181-2187. doi: 10.13224/j.cnki.jasp.2014.09.023
Citation: BAI Guo-qiang, CHANG Hai-ping. Effect of angle between lamilloy and rotation axis on heat transfer capability of limited lamilloy[J]. Journal of Aerospace Power, 2014, 29(9): 2181-2187. doi: 10.13224/j.cnki.jasp.2014.09.023

Effect of angle between lamilloy and rotation axis on heat transfer capability of limited lamilloy

doi: 10.13224/j.cnki.jasp.2014.09.023
  • Received Date: 2013-06-13
  • Publish Date: 2014-09-28
  • Heat transfer characteristics in condition of different angles between lamilloy and rotation axis in limited lamilloy under rotating state was researched by numerical simulation. The relation between lamilloy heat transfer capacity and angle between lamilloy and rotation axis was acquired. Results show that surface heat transfer coefficients present similar characteristic with different angles between lamilloy and rotation axis. The surface heat transfer coefficient is highest and the effect of buoyancy force is smallest when the angles between lamilloy and rotation axis are 90°and 270°. The surface heat transfer coefficient is lowest and the effect of buoyancy force is biggest when the angles between lamilloy and rotation axis are 0°and 180°. The effects of Coriolis force and buoyancy force are researched separately. The effect of Coriolis force in parallel to the lamilloy on flow is more remarkable than that perpendicular to the lamilloy.

     

  • loading
  • [1]
    Chen H C,Jang Y J,Han J C.Computation of heat transfer in rotating two-pass square channels by a second-moment closure model[J].International Journal of Heat and Mass Transfer,2000,43(9):1603-1616.
    [2]
    Chang S W,Morris W D.Heat transfer in a radially rotating square duct fitted with in-line transverse ribs[J].International Journal of Thermal Sciences,2003,42(3):267-282.
    [3]
    Xun Q Q,Wang B C,Yee E.Large-eddy simulation of turbulent heat convection in a spanwise rotating channel flow[J].International Journal of Heat and Mass Transfer,2011,54(1):698-716.
    [4]
    Parsons J A,Han J C,Zhang Y M.Wall heating effect on local heat transfer in a rotating two-pass square channel with 90-degree rib turbulators[J].International Journal of Heat and Mass Transfer,1994,37(9):1411-1420.
    [5]
    Johnson B V,Wagner J H,Steuber G D.Heat transfer in rotating serpentine passages with selected model orientations for smooth or skewed trip walls[J].Journal of Turbomachinery,1994,116(4):738-744.
    [6]
    Liou T M,Chang S W,Hung J H.High rotation number heat transfer of a 45° rib-roughened rectangular duct with two channel orientations[J].International Journal of Heat and Mass Transfer,2007,50(19):4063-4078.
    [7]
    Luai A,Han J C.Effect of rotation on heat transfer in two-pass square channels with five different orientations of 45° angled rib turbulators[J].International Journal of Heat and Mass Transfer,2003,46(4):653-669.
    [8]
    Mohammad A Q,Chen H C,Han J C.A numerical study of flow and heat transfer in rotating rectangular channels(AR=4) with 45° rib turbulators by Reynolds stress turbulence model[J].Journal of Heat Transfer,2003,125(1):19-26.
    [9]
    Su G G,Chen H C,Han J C.Computation of flow and heat transfer in rotating two-pass rectangular channels(AR=1∶1,1∶2 and 1∶4) with smooth walls by a Reynolds stress turbulence model[J].International Journal of Heat and Mass Transfer,2004,47(26):5665-5683.
    [10]
    Nealy D A,Relder S B.Evaluation of laminated porous wall material for combustor liner cooling[J].Journal of Engineering for Power,1980,102(2):268-276.
    [11]
    桂忠楼,张鑫华,钟振纲.高效冷却单晶涡轮叶片制造技术的发展[J].航空工程与维修,1998(2):11-13. GUI Zhonglou,ZHANG Xinhua,ZHONG Zhengang.Development of manufacturing technology for single crystal turbine blades and vanes with high cooling effect[J].Aviation Maintenance and Engineering,1998(2):11-13.(in Chinese)
    [12]
    Huh M,Jiang L,Han J C.Influence of channel orientation on heat transfer in a two-pass smooth and ribbed rectangular channel(AR=2∶1) under large rotation numbers[J].Journal of Turbomachinery,2012,134(1):22-32.
    [13]
    Basha A,Qahtant Y.Entropy generation in a channel resembling gas turbine cooling passage:effect of rotation number and density ratio on entropy generation[J].Sadhana,2009,34(2):439-454.
    [14]
    徐磊,常海萍,潘金栋.旋转条件下带出流孔的受限空间内冲击换热[J].推进技术,2008,29(2):149-152. XU Lei,CHANG Haiping,PAN Jindong.Heat transfer of impingement in limited room configuration with effusion in rotating state[J].Journal of Proulsion Technology,2008,29(2):149-152.(in Chinese)
    [15]
    徐磊,常海萍,潘金栋.旋转条件下“冲击/出流”双层壁内部换热试验[J].航空动力学报,2007,22(10):1658-1662. XU Lei,CHANG Haiping,PAN Jindong.Experimental research on heat transfer of 'impingement/effusion' double-plate configuration in rotating state[J].Journal of Aerospace Power,2007,22(10):1658-1662.(in Chinese)
    [16]
    张镜洋,常海萍,徐磊.转子叶片径向受限的“冲击-气膜出流”冷却结构流动与换热[J].推进技术,2011,32(1):125-139. ZHANG Jingyang,CHANG Haiping,XU Lei.Flow and heat transfer characteristics of 'impingement film cooling' configuration in limited space of rotating blade[J].Journal of Prolusion Technology,2011,32(1):125-139.(in Chinese)
    [17]
    白云峰.旋转条件下冲击冷却数值模拟及实验研究[D].南京:南京航空航天大学,2004. BAI Yunfeng.Numerical simulation and experiment research on the effect of rotation on jet impingement cooling[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2004.(in Chinese)
    [18]
    Sung K H,Dong H L,Hyung H C.Effect of jet direction on heat/mass transfer of rotating impingement jet[J].Applied Thermal Engineering,2009,29(14):2914-2920.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1401) PDF downloads(774) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return