| Citation: | LIU Chun-feng, ZHANG Yun-hua, ZHANG Xiao-yong, YAN Xiao-jun, NIE Jing-xu. An experimental scheme of investigating fatigue life of turbine casing slot[J]. Journal of Aerospace Power, 2014, 29(11): 2735-2742. doi: 10.13224/j.cnki.jasp.2014.11.027
|
| [1] |
Chowdhury S,Mukhopadhyay N.Failure analysis of a weld repaired steam turbine casing[J].Engineering Failure Analysis,1998,5(3):205-218.
|
| [2] |
Choia W,Fujiyamab K,Kim B,et al.Development of thermal stress concentration factors for life assessment of turbine casings[J].International Journal of Pressure Vessels and Piping,2012,98:1-5.
|
| [3] |
Witeka L,Orkisza M,Wygonik P,et al.Fracture analysis of a turbine casing[J].Engineering Failure Analysis,2011,18(3):914-923.
|
| [4] |
刘星,李克安,唐驾时,等.重型燃气轮机铸造机匣的强度与刚度分析[J].汽轮机技术,2011,53(2):85-88. LIU Xing,LI Kean,TANG Jiashi,et al.Analysis of strength and stiffness for heavy-duty gas turbine casing[J].Turbine Technology,2011,53(2):85-88.(in Chinese)
|
| [5] |
陈杰,范引鹤,高德平.机匣模拟疲劳试验的相似条件研究[J].实验力学,2002,3(1):102-104. CHEN Jie,FAN Yinhe,GAO Deping.Stress similitude consideration for the model fatigue test of a combustor casing[J].Journal of Experimental Mechanics,2002,3(1):102-104.(in Chinese)
|
| [6] |
普瑞刚.某发动机后机匣的低循环疲劳寿命试验研究[J].航空动力学报,1986,1(1):11-14. PU Ruigang.Low cycle fatigue life testing research of an aeroengine case[J].Journal of Aerospace Power,1986,1(1):11-14.(in Chinese)
|
| [7] |
Kutsuna M,Fujita S,Sugita Y,et al.Thermal fatigue test for turbine housing by a pulse YAG laser[J].Proceedings of the International Society for Optical Engineering,2000,3888:438-445.
|
| [8] |
Kazempour-Liacy H,Abouabi S,Akbari-Garakani M.Failure analysis of a first stage gas turbine blade[J].Engineering Failure Analysis,2011,18(1):517-522.
|
| [9] |
Troshchenko V,Prokopenko A.Fatigue strength of gas turbine compressor blades[J].Engineering Failure Analysis,2000,7(3):209-220.
|
| [10] |
高振同.疲劳应用统计学[M].北京:国防工业出版社,1986.
|
| [11] |
刘芝娜.全尺寸涡轮叶片高、低周复合疲劳试验研究[D].北京:北京航空航天大学,2009. LIU Zhina.Combined fatigue test methods on full-scale aero-engine turbine blades[D].Beijing:Beijing University of Aeronautics and Astronautics,2009.(in Chinese)
|
| [12] |
闫晓军,孙瑞杰,邓瑛,等.涡轮叶片复合疲劳特性曲线及其规律的试验[J].航空动力学报,2011,26(8):1824-1829. YAN Xiaojun,SUN Ruijie,DENG Ying,et al.Experimental study on fatigue curve law of turbine blade under combined high and low cycle loading[J].Journal of Aerosapce Power,2011,26(8):1824-1829.(in Chinese)
|
| [13] |
康宁,闫晓军,李小甫.高、低周复合疲劳试验中振动应力的监测与计算[J].燃气涡轮试验与研究,2010,23(4):22-25. KANG Ning,YAN Xiaojun,LI Xiaofu.Numerical calculation and measurement of the vibration stress in combined high and low cycle fatigue tests[J].Gas Turbine Experiment and Research,2010,23(4):22-25.(in Chinese)
|
| [14] |
Ling J,Pan J.A maximum likelihood method for estimating P-S-N curves[J].International Journal of Fatigue,1997,19(5):415-419.
|
| [15] |
赵永翔,王金诺,高庆.估计三种常用疲劳应力-寿命模型P-S-N曲线的统一经典极大似然法[J].应用力学学报,2001,18(1):84-89. ZHAO Yongxiang,WANG Jinnuo,GAO Qing.A unified classical maximum likelihood approach for estimating P-S-N curves of three commonly used fatigue stress-life relations[J].Chinese Journal of Applied Mechanics,2001,18(1):84-89.(in Chinese)
|
| [16] |
陈一龙,冯美斌.一种P-S-N曲线的快速测定方法[J].汽车工艺与材料,2004(7):101-104. CHEN Yilong,FENG Meibin.A rapid measuring method of P-S-N curve[J].Automobile Technology and Material,2004(7):101-104.(in Chinese)
|
| [17] |
匡卫红,倪侃,张圣坤.等幅疲劳三参数P-S-N曲线族最优拟合法[J].海洋工程,2002,20(2):74-77. KUANG Weihong,NI Kan,ZHANG Shengkun.Optimization method for fitting three parameters of P-S-N curve with the given confidence under constant amplitude loading[J]. The Ocean Engineering,2002,20(2):74-77.(in Chinese)
|
| [18] |
孙瑞杰,闫晓军,聂景旭.基于复合疲劳试验的涡轮叶片振动应力反推法[J].航空动力学报,2012,27(2):290-293. SUN Ruijie,YAN Xiaojun,NIE Jingxu.Inverse method for estimating the vibration stress of turbine blades based on combined high-and-low cycle fatigue tests[J].Journal of Aerospace Power,2012,27(2):290-293.(in Chinese)
|
DownLoad: