| Citation: | WANG Tao, CHEN Guo-ding, CHEN Bo. Theory and experiment on air flow field in bearing chamber[J]. Journal of Aerospace Power, 2014, 29(11): 2767-2773. doi: 10.13224/j.cnki.jasp.2014.11.031
|
| [1] |
林基恕,张振波.21 世纪航空发动机动力传输系统的展望[J].航空动力学报,2001,16(2):108-114. LIN Jishu,ZHANG Zhenbo.Prospects of aeroengine power transmission system in the 21st century[J].Journal of Aerospace Power,2001,16(2):108-114.(in Chinese)
|
| [2] |
Wittig S,Glahn A,Himmelsbach J.Influence of high rotational speeds on heat transfer and oil film thickness in aero -engine bearing chambers[J].Journal of Engineering for Gas Turbines and Power,1994,116(2):395-401.
|
| [3] |
Gorse P,Busam S,Dullenkopf K.Influence of operating condition and geometry on the oil film thickness in aeroengine bearing chambers[J].Journal of Engineering for Gas Turbines and Power,2006,128(1):103-110.
|
| [4] |
Farrall M,Simmons K,Hibberd S,et al.A numerical model for oil film flow in an aeroengine bearing chamber and comparison to experimental data[J].Journal of Engineering for Gas Turbines and Power,2006,128(1):111-117.
|
| [5] |
Farrall M,Hibberd S,Simmons K.The effect of initial injection conditions on the oil droplet motion in a simplified bearing chamber[J].Journal of Engineering for Gas Turbines and Power,2008,130(1):012501.1-012501.7.
|
| [6] |
Rodkey S C,Heister S D,Collicott S H.Physics of gas turbine engine bearing chambers[R].AIAA-2007-5033,2007.
|
| [7] |
刘亚军,陈国定,王军.高转速下轴承腔内壁油膜流动建模[J].航空动力学报,2010,25(8):1900-1905. LIU Yajun,CHEN Guoding,WANG Jun.Flow modeling of oil film on bearing chamber wall at high-speed[J].Journal of Aerospace Power,2010,25(8):1900-1905.(in Chinese)
|
| [8] |
Chandra B,Simmons K,Pickering S,et al.Liquid and gas flow behaviour in highly rotating environment[R].ASME Paper GT2011-46430,2011.
|
| [9] |
Maqableh A,Simmons K,Hibberd S,et al.CFD modeling of three-component air/oil flow and heat transfer in a rotating annulus[C]//Proceeding of 11th International Conference of CFD.Vancouver,Canada:CFD Society of Canada,2003:256-263.
|
| [10] |
YUAN Xichuan,GUO Hui,WANG Liangyun.Experiment study of heat transfer in aeroengine bearing chambers[J].Applied Mechanics and Materials,2011,86:448-453.
|
| [11] |
Farrall M,Hibberd S,Simmons K,et al.Prediction of air oil exit flows in a commercial aeroengine bearing chamber[J].Journal of Aerospace Engineering,2006,220(3):197-202.
|
| [12] |
Gorse P,Willenborg K,Busam S,et al.3D-LDA measurements in an aero-engine bearing chamber[C]//Proceedings of ASME Turbo Expo 2003 Power for Land,Sea and Air.Atlanta,Georgia,USA:ASME,2003:257-265.
|
| [13] |
Lee C W,Palma P C,Simmons K,et al.Comparison of computational fluid dynamics and particle image velocimetry data for the airflow in an aeroengine bearing chamber[J].Journal of Engineering for Gas Turbines and Power,2005,127(4):697-703.
|
| [14] |
Aidarinis J,Missirlis D,Yakinthos K,et al.CFD modeling and LDA measurements for the air-flow in an aero engine front bearing chamber[J].Journal of Engineering for Gas Turbines and Power,2011,133(8):082504.1-082504.8.
|
| [15] |
王军,陈国定,刘亚军.腔型/旋转结构空间的气相介质流动分析[J].机械设计与制造,2010(10):192-194. WANG Jun,CHEN Guoding,LIU Yajun.The analysis of airflow in the chamber-rotating structure[J].Machinery Design and Manufacture,2010(10):192-194.(in Chinese)
|
| [16] |
陈薄,陈国定,张永红,等.航空发动机轴承腔气相速度场数值模拟[J].机械科学与技术,2012,31(8):1241-1246. CHEN Bo,CHEN Guoding,ZHANG Yonghong,et al.Numerically simulating airflow field inside aeroengine bearing chamber[J].Mechanical Science and Technology,2012,31(8):1241-1246.(in Chinese)
|
| [17] |
汪友勇,王锁芳,艾俊峰,等.轴承腔油气两相流数值模拟的试验验证[J].航空动力学报,2013,28(3):629-635. WANG Youyong,WANG Suofang,AI Junfeng,et al.Experimental verification of numerical simulation of oil-air two-phase flow in bearing chamber[J].Journal of Aerospace Power,2013,28(3):629-635.(in Chinese)
|
| [18] |
Menter F R.Two-equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):1598-1605.
|
DownLoad: