| Citation: | HUANG Xi-qiao, LI Yang, XIONG Yue-fei, YUAN Yuan-yuan, ZHENG Long-xi. Experiment on heat exchange and cooling of pulse detonation engine detonation tube wall[J]. Journal of Aerospace Power, 2014, 29(12): 2817-2823. doi: 10.13224/j.cnki.jasp.2014.12.005
|
| [1] |
郑龙席,严传俊,范玮,等.脉冲爆震发动机模型机爆震室壁温分布实验研究[J].燃烧科学与技术,2003,9(4):344-347. ZHENG Longxi,YAN Chuanjun,FAN Wei,et al.Experimental investigation on outer wall temperature distribution of a pulse detonation engine model[J].Journal of Combustion Science and Technology,2003,9(4):344-347.(in Chinese)
|
| [2] |
严传俊,范玮.脉冲爆震发动机原理及关键技术[M].西安:西北工业大学出版社,2005:277-280.
|
| [3] |
严传俊,范玮,黄希桥,等.新概念脉冲爆震发动机的探索性研究[J].自然科学进展,2002,12(10):1021-1025. YAN Chuanjun,FAN Wei,HUANG Xiqiao,et al.New concept of pulse detonation engine exploratory study[J].Progress in Natural Science,2002,12(10):1021-1025.(in Chinese)
|
| [4] |
Hoke H,Bradley R.Heat transfer and thermal management in a pulsed detonation engine[R].AIAA-2003-852,2003.
|
| [5] |
Fontenot D G.Transient heat transfer properties in a pulse detonation combustor[D].Monterey,California:Naval Postgraduate School,2011.
|
| [6] |
Ajmani K,Breisacher K J.Numerical and experimental studies of a film cooled pulsed detonation tube[R].AIAA-2005-3509,2005.
|
| [7] |
Naples A G,Hoke J L.Study of heat loads from steady deflagration and pulsed detonation combution[R].AIAA-2010-956,2010.
|
| [8] |
Naples A G,Hoke J L.Numerical analysis of a pulse detonation cross flow heat load experiment[R].AIAA-2011-584,2011.
|
| [9] |
Miser C L,King P I.PDE flash vaporization system for hydrocarbon fuel using thrust tube waste heat[R].AIAA- 2005-3511,2005.
|
| [10] |
Tucker K C,King P I.The use of a flash vaporization system with liquid hydrocarbon fuels in pulse detonation engine[R].AIAA-2004-868,2004.
|
| [11] |
Helfrish T M,King P I.Effect of supercritical fuel injection on cycle performance of pulsed detonation engine[J].Journal of Propulsion and Power,2007,23(4):748-755.
|
| [12] |
Stevens C A,King P I.Fuel composition and coking analysis of endothermically heated hydrocarbon fuels for use in a pulsed detonation engine[R].AIAA-2009-501,2009.
|
| [13] |
Ghosn L J,Zhu D.Thermal barrier and protective coating to improve the durability of a combustor under a pulse detonation engine environment[R].AIAA-2007-2070,2007.
|
| [14] |
宫继双,范育新,王家骅,等.爆震管壁面热负荷实验[J].航空动力学报,2009,24(9):1952-1958. GONG Jishuang,FAN Yuxin,WANG Jiahua,et al.Experimental study on heat load of detonation tube[J].Journal of Aerospace Power,2009,24(9):1952-1958.(in Chinese)
|
| [15] |
王杏涛,张靖周,谭晓茗.脉冲爆震燃烧室管壁冲击冷却效果的数值研究[J].航空动力学报,2011,26(11):2515-2521. WANG Xingtao,ZHANG Jingzhou,TAN Xiaoming.Numerical simulation on impingement cooling characteristics of pulsed detonation tube[J].Journal of Aerospace Power,2011,26(11):2515-2521.(in Chinese)
|
| [16] |
郑龙席,严传俊,李牧.多循环PDE模型机爆震室壁温分布数值模拟[J].燃烧科学与技术,2007,13(5):414-420. ZHENG Longxi,YAN Chuanjun,LI Mu.Numerical simulation on detonation chamber wall temperature distribution of a multi-cycle pulse detonation engine model[J].Journal of Combustion Science and Technology,2007,13(5):414-420.(in Chinese)
|
| [17] |
黄希桥,陈乐,严传俊,等.脉冲爆震发动机管壁废热加温燃油实验[J].航空动力学报,2011,26(8):1702-1707. HUANG Xiqiao,CHEN Le,YAN Chuanjun,et al.Experiment on heating kerosene with useless heat on the wall of pulse detonation engine[J].Journal of Aerospace Power,2011,26(8):1702-1707.(in Chinese)
|
| [18] |
陈文娟,张群,范玮,等.吸气式脉冲爆震发动机壁温试验[J].推进技术,2011,32(2):296-300. CHEN Wenjuan,ZHANG Qun,FAN Wei,et al.Experiment on wall temperature of an air-breathing pulse detonation engine[J].Journal of Propulsion Technology,2011,32(2):296-300.(in Chinese)
|
DownLoad: