| Citation: | WANG Zhuo-qi, LU Li-peng, YUAN Wei, SONG Xi-zhen. Numerical simulation on stall margin improvement of transonic compressor by a trapped vortex casing treatment[J]. Journal of Aerospace Power, 2014, 29(12): 2948-2956. doi: 10.13224/j.cnki.jasp.2014.12.023
|
| [1] |
Wilke I,Kau H P,Brignole G.Numerically aided design of a high-efficient casing treatment for a transonic compressor[R].ASME Paper GT2005-68993,2005.
|
| [2] |
Wilke I,Kau H P.A numerical investigation of the flow mechanisms in a HPC front stage with axial slots[R].ASME Paper GT2003-38481,2003.
|
| [3] |
Wilke I,Kau H P.A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage[R].ASME Paper GT2002-30642,2002.
|
| [4] |
Hoffman W H,Ballman J.Some aspects of tip vortex behavior in a transonic turbocompressor[J].ISABE 2003-1223,2003.
|
| [5] |
Hofman W,Ballmann J.Tip clearance vortex development and shock-vortex-interaction in a transonic axial compressor rotor[R].AIAA-2002-0083,2002.
|
| [6] |
Schlechtriem S,Loetzerich M.Breakdown of tip leakage vortices in compressors at flow conditions close to stall[R].ASME Paper 97-GT-41,1997.
|
| [7] |
Furukawa M,Inoue M,Saiki K,et al.The role of tip leakage vortex breakdown in compressor rotor aerodynamics[J].Journal of Turbomachinery,1999,121(3):469-480.
|
| [8] |
Hoeger M,Fritsch G,Bauer D.Numerical simulation of the shock-tip leakage vortex interaction in a HPC front stage[J].Journal of Turbomachinery,1999,121(3):456-468.
|
| [9] |
Smith G D J,Cumpsty N A.Flow phenomena in compressor casing treatment[J].Journal of Engineering for Gas Turbines and Power,1984,106(3):532-541.
|
| [10] |
Johnson M C,Greitzer E M.Effects of slotted hub and casing treatments on compressor endwall flow fields[J].Journal of Turbomachinery,1987,109(3):380-387.
|
| [11] |
Lee N K W,Greitzer E M.Effects of endwall suction and blowing on compressor stability enhancement[J].Journal of Turbomachinery,1990,112(1):133-144.
|
| [12] |
Prince D C,Wisler D D,Hilvers D E.Study of casing treatment stall margin improvement phenomena[R].ASME Paper 75-GT-60,1975.
|
| [13] |
Wisler D C,Hilvers D E.Stator hub treatment study[R].NASA Report CT-134729,1974.
|
| [14] |
Takata H,Tsukuda Y.Stall margin improvement by casing treatment:its mechanism and effectiveness[J].Journal of Engineering for Power,1977,99(1):121-133.
|
| [15] |
张燕东,陆亚钧.圆弧斜槽处理机匣的实验研究[J].航空动力学报,1998,13(3):255-259,344. ZHANG Yandong,LU Yajun.An experimental investigation on arc skewed slot casing treatment[J].Journal of Aerospace Power,1998,13(3):255-259,344.(in Chinese)
|
| [16] |
李玲,于清,陆亚钧.处理机匣在单级跨声速风扇上的实验研究[J].推进技术,2000,21(3):49-52. LI Ling,YU Qing,LU Yajun.Experimental research of casing treatment on single stage transonic fan[J].Journal of Propulsion Technology,2000,21(3):49-52.(in Chinese)
|
| [17] |
钱煜平,刘建勇,李秋实,等.实壁/圆弧斜槽周向不对称组合式处理机匣实验[J].航空动力学报,2009,24(7):1633-1638. QIAN Yuping,LIU Jianyong,LI Qiushi,et al.Experimental investigation of a solid/arc slot asymmetrical combined casing treatment[J].Journal of Aerospace Power,2009,24(7):1633-1638.(in Chinese)
|
| [18] |
楚武利,朱俊强,刘志伟.折线斜缝式机匣处理的实验研究及机理分析[J].航空动力学报,1999,14(3):270-274. CHU Wuli,ZHU Junqiang,LIU Zhiwei.Experimental research and analysis of sloped slotted casing treatment[J].Journal of Aerospace Power,1999,14(3):270-274.(in Chinese)
|
| [19] |
王卓奇,袁巍,宋西镇,等.跨声速压气机转子失速过程的实验[J].航空动力学报,2012,27(7):1456-1463. WANG Zhuoqi,YUAN Wei,SONG Xizhen,et al.Experimental investigation on the stall process of a transonic compressor rotor[J].Journal of Aerospace Power,2012,27(7):1456-1463.(in Chinese)
|
DownLoad: