Volume 29 Issue 12
Dec.  2014
Turn off MathJax
Article Contents
WANG Chao, REN Jun-xue, HAO Wen-qiang, LIU Yu, YANG Jing-xian. Characteristics of effective pivot point excursion for flexible joint[J]. Journal of Aerospace Power, 2014, 29(12): 2993-2999. doi: 10.13224/j.cnki.jasp.2014.12.029
Citation: WANG Chao, REN Jun-xue, HAO Wen-qiang, LIU Yu, YANG Jing-xian. Characteristics of effective pivot point excursion for flexible joint[J]. Journal of Aerospace Power, 2014, 29(12): 2993-2999. doi: 10.13224/j.cnki.jasp.2014.12.029

Characteristics of effective pivot point excursion for flexible joint

doi: 10.13224/j.cnki.jasp.2014.12.029
  • Received Date: 2013-10-21
  • Publish Date: 2014-12-28
  • A miniature flexible joint using silicone rubber elastomer and wrapped insulating boot was designed. The relation between effective and geometric pivot points was studied. The quadrinomial second order Mooney-Rivlin invariant model was used to describe the constitutive relationship of the elastomer. The excursions of effective and geometric pivot points of flexible joint at different vector angles under 0MPa and 9MPa vessel pressure were calculated respectively using ANSYS. Both effective and geometric pivot point cylinders were obtained. The simulation and experiment results of effective pivot point were compared. The accuracy of the geometric pivot point excursion was verified by the experiment of clearance crash. In addition, the reason of the effective pivot point excursion was also studied. Results show that the simulated effective pivot point cylinder has a good agreement with the experiment. The effective and geometric pivot points are of different concepts. The effective pivot point excursion is limited to a radius of 2.5mm, 1.4mm high cylindrical envelope while the geometric pivot point excursion is limited to a radius of 0.013mm, 0.6mm high cylindrical envelope. The effective pivot point excursion is caused by different strains of each reinforcement and elastemer.

     

  • loading
  • [1]
    Shani S,Putter S,Peretz A,et al.Development of a high-performance flexible joint for thrust vector control[R].AIAA 95-3017,1995.
    [2]
    林培基,高峰.推力矢量对防空导弹作战效能的影响[J].飞航导弹,2009(1):56-57,64. LIN Peiji,GAO Feng.The influence of thrust vector control to the antiaircraft missile combat efficiency[J].Winged Missiles Journal,2009(1):56-57,64.(in Chinese)
    [3]
    吉礼超,宋贵宝.防空导弹控制方法的研究现状及展望[J].战术导弹技术,2009(3):54-59. JI Lichao,SONG Guibao.Current study status and future prospect of control mode of air-defense missile[J].Tactical Missile Technology,2009(3):54-59.(in Chinese)
    [4]
    Wassom S R,Faupell L C,Perley T.Integrated aerofin/thrust vector control for tactical missiles[J].Journal of Propulsion and Power,1991,7(3):374-381.
    [5]
    ATK Techsystems Inc.ATK space propulsion productscatalog[EB/OL].[2008-05-14].http://www.atk.com/capabilities_space/documents/atk_catalog_may_2008.pdf.
    [6]
    Caveny L H,Geisler R L,Ellis R A,et al.Solidrocket enabling technologies and milestones in the United States[J].Journal of Propulsion and Power,2003,19(6):1038-1066.
    [7]
    Olsen K E,Walsh J J,Thomas E L.Navy terrier LEAP third-stage propulsion[R].Monterey,CA:AIAA Missile Sciences Conference,1994.
    [8]
    Uhrig G,Roussille C.Design drivers and technologies for solid propulsion of interceptors[R].Arcachon,France:1st AAAF International Conference on Missile Defense,2003.
    [9]
    Uhrig G.Propulsion of interceptors:masters technologies in Europe[R].Seville,Spain:3rd AAAF International Conference on Missile Defense,2006.
    [10]
    Woodberry R F H,Zeamer R J.Solid rocket thrust vector control[R].NASA SP-8114,1974.
    [11]
    谢传峰.动力学[M].北京:高等教育出版社,2002:155-163.
    [12]
    刘志武.柔性接头受轴向对称载荷时大变形有限单元法计算介绍[J].推进技术,1986,7(4):15-21. LIU Zhiwu.Introduce of finite element method for the large deformation of flexible joint with the axially symmetric load[J].Journal of Propulsion Technology,1986,7(4):15-21.(in Chinese)
    [13]
    史宏斌,侯晓.控制力作用柔性喷管轴向摆心漂移计算[C]//中国宇航学会固体推进专业委员会第十九届学术年会论文集.昆明:中国宇航学会,2002:47-48.
    [14]
    张晓光,刘宇,任军学,等.小型柔性接头推力矢量性能试验研究[J].航空动力学报,2012,27(12):2836-2841. ZHANG Xiaoguang,LIU Yu,REN Junxue,et al.Experimental investigation of miniature flexible joint thrust vector characteristics[J].Journal of Aerospace Power,2012,27(12):2836-2841.(in Chinese)
    [15]
    陈汝训.固体火箭发动机设计与研究:下[M].北京:中国宇航出版社,2005.
    [16]
    Dunham R S,Nickell R E.Finite analysis of axisymmetric solids with arbitrary loading[R].Berkeley,CA:University of California,SEL-67-6(AD-655253),1967.
    [17]
    Wilson J W.Final report:poseidon C3 joint venture joint[R].NASA TWR-2486,1967.
    [18]
    王春光,史宏斌,王雪坤,等.高压下喷管柔性接头摆动力矩数值分析[J].推进技术,2012,32(2):202-206. WANG Chunguang,SHI Hongbin,WANG Xuekun,et al.Numerical analysis of deflection torque of flexible joint with high pressure[J].Journal of Propulsion Technology,2012,32(2):202-206.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1774) PDF downloads(1012) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return