| Citation: | CHEN Lu-miao, WANG Hong-yu, QIN Zhao-ye, CHU Fu-lei. Aerodynamic characteristics analysis of eccentric drum basedon three-dimensional model[J]. Journal of Aerospace Power, 2015, 30(2): 362-367. doi: 10.13224/j.cnki.jasp.2015.02.014
|
| [1] |
杨士杰,吕文林.航空涡喷、涡扇发动机结构设计准则[M]. 北京:中国航空工业总公司发动机系统工程局,1997.
|
| [2] |
刘大响,陈光.航空发动机—飞机的心脏[M].北京:航空工业出版社,2003.
|
| [3] |
张伟.航空发动机[M].北京:航空工业出版社,2010.
|
| [4] |
杨军.直通型封严篦齿流动特性的试验研究及数值计算[D].成都:电子科技大学,2009. YANG Jun.Experiment research and numerical calculation of seal grate tooth flow characteristics in straight-through type[D].Chengdu:University of Electronic Science and Technology of China,2009.(in Chinese)
|
| [5] |
Martin H M.Labyrinth packings[J].Journal of Engineering,1998,85(16):33-36.
|
| [6] |
Kearton W J,Keh T H.Leakage of air through labyrinth glands of staggered type[J].Proc.Inst.Mech.Engrs.,1952,166(1):180-188.
|
| [7] |
Egli A.Theleakage of steam through labyrinth seals[J].Transactions of the ASME,1935,57(22):115-122.
|
| [8] |
Denecke J,Schramm V,Kin S,et al.Influence of rub-grooves on labyrinth seal leakage[J].Journal of Turbomachinery,2003,125(2):387-393.
|
| [9] |
Margaret P P.High-speed,high-temperature finger seal test results[R].NASA TM2002-211589,2002.
|
| [10] |
Stocker H L,Cox D M.Aerodynamic performance of conventional and advanced design labyrinth seals with solid-smooth,abradable,and honeycomb lands[R].NASA CR-135307,1997.
|
| [11] |
Vakili A D,Meganathan A J.Advanced labyrinth seals for steam turbine generators[R].ASME Paper GT2006-91263, 2006.
|
| [12] |
张霞,张效伟,朱惠人,等.直通型篦齿封严特性的试验[J].航空动力学报,2010,25(8):1753-1757. ZHANG Xia,ZHANG Xiaowei,ZHU Huiren,et al.Experimental investigation on seal characteristics of straight through labyrinth[J].Journal of Aerospace Power,2010,25(8):1753-1757.(in Chinese)
|
| [13] |
王鹏飞,刘玉芳,郭文,等.高转速对直通型篦齿封严特性影响的试验研究[J].燃气涡轮试验与研究,2007,5(2):45-48. WANG Pengfei,LIU Yufang,GUO Wen,et al.Influence of high rotational speeds on the labyrinth sealing characteristics[J].Gas Turbine Experiment and Research,2007,5(2):45-48.(in Chinese)
|
| [14] |
Erik B,Klaus D,Hans J B.Optimization of combining experimental,numerical and data mining methods[R].ASME Paper 2012-GT-68077,2012.
|
| [15] |
Michaud M,Vakili A,Meganathan A.An experimental study of labyrinth seal flow[R].IJPGC 2003-40097,2003.
|
| [16] |
Stocker H L,Cox D M.Aerodynamic performance of conventional and advanced design labyrinth seals with solid-smooth,abradable,and honeycomb lands[R].NASA CR-135307,1977.
|
| [17] |
纪国剑.航空发动机典型篦齿封严泄露特性的数值和实验研究[D].南京:南京航空航天大学,2008. JI Guojian.Numerical and experimental investigation of sealing characteristics on typical labyrinth seals in aero-engine[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2008.(in Chinese)
|
| [18] |
王洪玉,秦朝烨,褚福磊,等.航空发动机直通型篦齿封严鼓筒气动力分析[J].工程力学,2013,30(12):267-274. WANG Hongyu,QIN Zhaoye,CHU Fulei,et al.Aero dynamic analysis of straight through labyrinth seal of the drum of an aeroengine[J].Engineering Mechanics,2013,30(12):267-274.(in Chinese)
|
DownLoad: