| Citation: | LING Jing, DU Xin, WANG Song-tao, WANG Zhong-qi. Relationship between optimum curved blade generate line and blade camber angle in linear compressor cascade[J]. Journal of Aerospace Power, 2015, 30(4): 875-882. doi: 10.13224/j.cnki.jasp.2015.04.014
|
| [1] |
Breugelmans F A E, Carels Y, Demuth M, et al.Influence of dihedral on the secondary flow in a two dimensional compressor cascade[J].Journal of Engineering for Gas Turbine and Power, 1984, 106(3):578-584.
|
| [2] |
Breugelmans F A E.Influence of incidence angle on the secondary flow in compressor cascade with different dihedral distribution[R].ISABE Paper 85-7078, 1985.
|
| [3] |
Sasaki T, Breugelmans F A E.Comparison of sweep and dihedral effects on compressor cascade performance[J].Journal of Turbomachinery, 1998, 120(2):454-464.
|
| [4] |
Fischer A, Riess W, Seume J R.Performance of strongly bowed stators in a 4-stage high speed compressor[R].ASME Paper GT2003-38392, 2003.
|
| [5] |
Gallimore S J, Bolger J J, Cumpsty N A, et al.The use of sweep and dihedral in multistage axial flow compressor blading:Part 1 university research and methods development[R].ASME Paper GT-2002-30328, 2002.
|
| [6] |
Gallimore S J, Bolger J J, Cumpsty N A, et al.The use of sweep and dihedral in multistage axial flow compressor blading:Part 2 low and high speed designs and test verification[R].ASME Paper GT-2002-30329, 2002.
|
| [7] |
钟兢军, 王苇, 苏杰先, 等.稠度对弯曲叶片压气机叶栅特性的影响[J].航空动力学报, 1997, 12(2):163-166. ZHONG Jingjun, WANG Wei, SU Jiexian, et al.Effects of solidity on characteristics of compressor cascade with curved-blade[J].Journal of Aerospace Power, 1997, 12(2):163-166.(in Chinese)
|
| [8] |
Wang Z Q, Lai S K, Xu W Y.Aerodynamic calculation of turbine stator cascades with curvilinear leaned blades and some experimental results[R].Baugalore, India:Symposium Paper of 5th ISABE, 1981.
|
| [9] |
苏杰先, 王仲奇.叶片的弯扭联合气动成型理论、实验、设计及其应用[J].动力工程, 1992, 12(6):1-6. SU Jiexian, WANG Zhongqi.Profiling of simultaneously vaulted and twisted blades:theory, experiment, design and application[J].Power Engineering, 1992, 12(6):1-6.(in Chinese)
|
| [10] |
张永军.扩压叶栅采用弯叶片控制流场结构与改善气动性能的研究[D].哈尔滨:哈尔滨工业大学, 2007. ZHANG Yongjun.Investigation of bowed blade controlling flow field structure and improving aerodynamic performance indiffussion cascade[D].Harbin:Harbin Institute of Technology, 2007.(in Chinese)
|
| [11] |
张华良.采用叶片弯/掠及附面层抽吸控制扩压叶栅内涡结构的研究[D].哈尔滨:哈尔滨工业大学, 2007. ZHANG Hualiang.Investigation on application of dihedral/swept blade and boundary layer suction to control vortex configuration in compressor cascades[D].Harbin:Harbin Institute of Technology, 2007.(in Chinese)
|
| [12] |
Xing X Q, Zhou S, Zhao X L.Probing into the connotation of sweep aerodynamics of transonic fans and compressors[R].ASME Paper 2001-GT-0352, 2001.
|
| [13] |
单鹏, 桂幸民, 周盛, 等.高负荷后掠风扇设计若干基本问题[J].工程热物理学报, 1999, 20(5):576-579. SHAN Peng, GUI Xingmin, ZHOU Sheng, et al.Fundamental considerations on high loading backward swept fan design[J].Journal of Engineering Thermophysics, 1999, 20(5):576-579.(in Chinese)
|
| [14] |
邢秀清, 单鹏, 周盛.风扇转子前缘曲线相对掠对性能的影响[J].航空动力学报, 2000, 15(1):39-43. XING Xiuqing, SHAN Peng, ZHOU Sheng.Effects of swept leading edge on performance of fans[J].Journal of Aerospace Power, 2005, 15(1):39-43.(in Chinese)
|
| [15] |
Koller U, Monig R, Kustes B, et al.Development of advanced compressor airfoils for heavy-duty gas turbines:Part Ⅰ design and optimization[J].Journal of Turbomachinery, 2000, 122(6):397-405.
|
| [16] |
周正贵.高亚声速压气机叶片优化设计[J].推进技术, 2004, 25(1):58-61. ZHOU Zhenggui.Optimization of high subsonic axial compressor blades[J].Journal of Propulsion Technology, 2004, 25(1):58-61.(in Chinese)
|
| [17] |
Chung J, Shim J K, Lee D.Shape optimization of high-speed axial compressor blades using 3D N-S flow physics[R].ASME Paper 2001-GT-0594, 2001.
|
| [18] |
金东海, 陈佳, 桂幸民.压气机叶栅多点气动优化设计[J].推进技术, 2007, 28(4):367-372. JIN Donghai, CHEN Jia, GUI Xingmin, et al.Multi-point aerodynamic design optimization for compressor cascade airfoils[J].Journal of Propulsion Technology, 2007, 28(4):367-372.(in Chinese)
|
DownLoad: