Volume 30 Issue 5
May  2015
Turn off MathJax
Article Contents
HU Hao-sheng, JIANG Yao, LU Ke-qian, HU Jian. Experiment on effect of misalignment on outlet flow field of double-swirler[J]. Journal of Aerospace Power, 2015, 30(5): 1025-1031. doi: 10.13224/j.cnki.jasp.2015.05.001
Citation: HU Hao-sheng, JIANG Yao, LU Ke-qian, HU Jian. Experiment on effect of misalignment on outlet flow field of double-swirler[J]. Journal of Aerospace Power, 2015, 30(5): 1025-1031. doi: 10.13224/j.cnki.jasp.2015.05.001

Experiment on effect of misalignment on outlet flow field of double-swirler

doi: 10.13224/j.cnki.jasp.2015.05.001
  • Received Date: 2014-01-08
  • Publish Date: 2015-05-28
  • In order to study the flow field characteristics downstream a double-swirler outlet, four double-swirler configurations with different misaligned dimensions (0,0.5,1.0,1.7mm) were designed. The no-reacting flow field of different misaligned dimensions was obtained by PIV. Expermental result shows that there is no significant difference in the flow field between misaligned dimension of 0mm and 0.5mm. In the configurations of misaligned dimension larger than 0.5mm, the double-vortex construction and the central recirculation zone downstream the double-swirler outlet become asymmetrical and narrow respectively. The flow filed show obvious deviation from the one of 0mm misaligned dimension. Misalignment has a pronounced influence on the radial velocity profile downstream the double-swirler outlet. The radial velocity around the axial location of X/D=0.5 is converted into peak and positive value when misaligned dimension is larger than 0.5mm.

     

  • loading
  • [1]
    Nikjooy M, Mongia H C, Samuelsen G S, et al.A numerical and experimental study of confined swirling jets[R].AIAA 89-2898, 1989.
    [2]
    Lefebvre A H.Gas turbine combustion[M].3th ed.Boca Raton, FL, USA:CRC Press, 2010.
    [3]
    McDonell V G, Arellao L, Lee S W, et al.Effect of hardware alignment of fuel distribution and combustion performance for a production engine fuel injection assembly[R].Naples, Italy:26th International Symposium on Combustion, 1996.
    [4]
    Ateshkadi A, McDonel V G, Samuelsen G S.Effect of hardware geometry on gas and drop behavior in a radial mixer spray[R].Pittsburgh, PA, USA:27th International Symposium on Combustion, 1998.
    [5]
    Jeng S M, Flohre N M, Mongia H C.Airtemperature effects on non-reacting spray characteristics issued from a counter-rotating swirler[R].AIAA-2005-355, 2005.
    [6]
    FU Yongqiang, CAI Jun, Jeng S M, et al.Confinement effects on the swirling flow of a counter-rotating swirl cup[R].ASME Paper GT2005-68622, 2005.
    [7]
    CAI Jun, FU Yongqiang, Flohre N M, et al.Experimental study on coherent structures of a counter-rotating multi-swirler cup[R].AIAA-2007-5674, 2007.
    [8]
    Turek L J, Dawson R W, Chaos M, et al.An investigation of the effect of swirl vane angle on fuel concentration and velocity fields in gas turbine mixers[R].ASME Paper GT2005-68152, 2005.
    [9]
    Reddy A P, Sujith R I, Chakravarthy S R.Swirler flow field characteristic in a sudden expansion combustor geometry[R].Journal of Propulsion and Power, 2006, 22, (4):800-808.
    [10]
    党新宪, 赵坚行, 张欣, 等.应用PIV技术测试模型环形燃烧室流场[J].航空动力学报, 2009, 24(7):1470-1475. DANG Xinxian, ZHAO Jianxing, ZHANG Xin, et al.Measurements of the flow fields in a model annular combustor using particle image velocimetry[J].Journal of Aerospace Power, 2009, 24(7):1470-1475.(in Chinese)
    [11]
    FU Yongqiang, CAI Jun, Jeng S M.Characteristics of the swirling flow generated by a counter-rotating swirler[R].AIAA-2007-5690, 2007.
    [12]
    林宇震, 许全宏, 刘高恩.燃气轮机燃烧室[M].北京:国防工业出版社, 2008.
    [13]
    Syred N, Beer J M.Combustion in swirling flows:a review[J].Combustion and Flame, 1974L:143-201.
    [14]
    Adrian S, Hollis D, Carrote J.PIV Measurementsof combustor turbulence fields[R].ASME Paper GT2007-28050, 2007.
    [15]
    Ramos J I, Somert H T.Swirling flow in a research combustor[R].AIAA Journal, 1985, 23(2):241-248.
    [16]
    Rosfjord T J, Russell S.Nozzle design and manufacturing influences on fuel spray circumferential uniformity[J].Journal of Propulsion and Power, 1989, 5(2):144-150.
    [17]
    Rosfjord T J, Eckerle W A.Aerating fuel nozzle design influence on airflow features[J].Journal of Propulsion and Power, 1991, 7(6):849-856.
    [18]
    Cohen J M, Rosfjord T J.Influences on the sprays formed by high-shear fuel nozzle/swirler assemblies[J].Journal of Propulsion and Power, 1993, 9(1):16-27.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1189) PDF downloads(829) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return