Volume 30 Issue 5
May  2015
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2015  >  30(5): 1040-1046
ZHU Hai-rong, ZHANG Wei-zheng, YUAN Yan-peng. Effects of modified VOF method on gas-liquid two-phase flow oscillating flow and heat transfer calculation[J]. Journal of Aerospace Power, 2015, 30(5): 1040-1046. doi: 10.13224/j.cnki.jasp.2015.05.003
Citation: ZHU Hai-rong, ZHANG Wei-zheng, YUAN Yan-peng. Effects of modified VOF method on gas-liquid two-phase flow oscillating flow and heat transfer calculation[J]. Journal of Aerospace Power, 2015, 30(5): 1040-1046. doi: 10.13224/j.cnki.jasp.2015.05.003
shu

Effects of modified VOF method on gas-liquid two-phase flow oscillating flow and heat transfer calculation

doi: 10.13224/j.cnki.jasp.2015.05.003

  • 1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;

  • 2. School of Mechanical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China

  • Received Date: 2014-12-08
  • Publish Date: 2015-05-28
    Abstract
  • On the basis of VOF (volume of fluid) model, the level set function was introduced, and the CLSVOF (coupled level set volume of fluid) model was formed to numerically simulate the process of gas-liquid two-phase oscillating flow and heat transfer. The simulation results of CLSVOF model were compared with that of VOF model, and also compared with the experimental results. The results show that either for the oscillating flow and heat transfer process of two-phase flow in rectangular cavity, or for the oscillating cooling process of engine-oil in piston oil cooling gallery, CLSVOF model can more accurately simulate the oscillating flow rules of gas-liquid two-phase flow, and the calculation values of heat transfer coefficient consist with experimental results much better. For the oscillating cooling calculation of engine-oil in piston oil cooling gallery, with the increase of speed, i .e. Reynolds number, the error of calculation values of heat transfer coefficient increase accordingly. At the ultimate speed of 3000r/min, the error of CLSVOF model is 3.8%, and the error of VOF model is 7.5%; the error increase amplification of CLSVOF model is about 0.6%. The error increase amplification of CLSVOF model is relatively small and stable, so its higher calculation accuracy can be illustrated.

     

    • FullText(HTML)
  • loading
    • References(24)
  • [1]
    姚仲鹏, 王新国.车辆冷却传热[M].北京:北京理工大学出版社, 2001.
    [2]
    Heron S D.History of sodium-cooled piston development[R].Ethyl Corporation, Report ERM, 1958.
    [3]
    Bush J E, London A L.Design data for cocktail shaker cooled pistons and valves[R].SAE Paper 650727, 1965.
    [4]
    French C C J.Piston cooling[R].SAE Paper 720024, 1972.
    [5]
    Sander W, Weigand B.Shaker-based heat and mass transfer in liquid metal cooled engine valves[J].International Journal of Heat and Mass Transfer, 2009, 52(11):2552-2564.
    [6]
    Sander W, Weigand B, Beerens C.Direct numerical simulation of two phase flows in liquid cooled engine valves[R].San Francisco:2005 ASME Summer Heat Transfer Conference, 2005.
    [7]
    Yi Y, Reddy M, Jarret M.CFD modeling of the multiphase flow and heat transfer for piston gallery cooling system[R].SAE Paper 2007-01-4128, 2007.
    [8]
    Kajiwara H, Fujioka Y, Negishi H.Prediction of temperatures on pistons with cooling gallery in diesel engines using CFD tool[R].SAE Paper 2003-01-0986, 2003.
    [9]
    Yoshikawa T, Rolf D R.Development of an oil gallery cooling model for internal combustion engines considering the cocktail shaker effect[J].Numerical Heat Transfer:Part A Applications, 2009, 56(7):563-578.
    [10]
    车得福, 李会雄.多相流及其应用[M].西安:西安交通大学出版社, 2007.
    [11]
    Kim J, Chung S H, Ahn K Y, et al.Simulation of a diffusion flame in turbulent mixing layer by the flame hole dynamics model with level-set method[J].Combustion Theory and Modeling, 2006, 10(4):219-240.
    [12]
    杨成仁, 侯凌云, 傅维标.预混湍流燃烧的level-set小火焰库方法研究[J].航空动力学报, 2003, 18(3):358-362. YANG Chenren, HOU Lingyun, FU Weibiao.Level-set flamelet modeling for premixed turbulent combustion[J].Journal of Aerospace Power, 2003, 18(3):358-362.(in Chinese)
    [13]
    Croce R, Griebel M, Schweitzer A M.Numerical simulation of bubble and droplet deformation by a level set approach with surface tension in three dimensions[J].International Journal for Numerical Methods in Fluids, 2009, 62(9):963-993.
    [14]
    赵知辛, 王焕然, 李彦鹏, 等.用Level Set方法对水下两个气泡运动的数值模拟[J].西安交通大学学报, 2009, 43(7):11-15. ZHAO Zhixin, WANG Huanran, LI Yanpeng, et al.Numerical simulation on motion of two underwater bubbles using level set method[J].Journal of Xi'an Jiaotong University, 2009, 43(7):11-15.(in Chinese)
    [15]
    HUANG Juntao, ZHANG Huisheng.A level set method for simulation of rising bubble[J].Journal of Hydrodynamics, 2004, 16(4):379-385.
    [16]
    YANG Chao, MAO Zaisha.An improved level set approach to the simulation of drop and bubble motion[J].Chinese Journal of Chemical Engineering, 2002, 10(3):263-272.
    [17]
    Balabel A.Numerical prediction of droplet dynamics in turbulent flow, using the level set method[J].International Journal of Computational Fluid Dynamics, 2011, 25(5):239-253.
    [18]
    Bourlioux A.A coupled level-set volume-of-fluid algorithm for tracking material interfaces[R].Lake Tahoe:Sixth International Symposium on Computational Fluid Dynamics, 1995.
    [19]
    Sussman M, Puckett E G.A coupled level set and volume-of-fluid method for computing 3D axisymmetric incompressible two-phase flows[J].The International Journal of Computational Physics, 2000, 162(2):301-337.
    [20]
    Son G, Hur N.A coupled level set and volume-of-fluid method for the buoyancy-driven motion of fluid particles[J].Numerical Heat Transfer:Part B Fundamentals, 2002, 42(6):523-542.
    [21]
    Son G.Efficient implementation of a coupled level set and volume-of-fluid method for three-dimensional incompressible two-phase flows[J].Numerical Heat Transfer:Part B Fundamentals, 2003, 43(6):549-565.
    [22]
    王春海.基于CLSVOF方法的单液滴碰壁铺展过程的模拟研究[D].北京:北京交通大学, 2011. WANG Chunhai.Simulation analysis on spreading process of single droplet impingement based on CLSVOF method[D].Beijing:Beijing Jiaotong University, 2011.(in Chinese)
    [23]
    曹元福.高强化活塞振荡冷却强化传热研究[D].北京:北京理工大学, 2012. CAO Yuanfu.Investigations of oscillating cooling enhanced heat transfer in high power diesel enginepiston[D].Beijing:Beijing Institute of Technology, 2012.(in Chinese)
    [24]
    Yu N, Noda T, Yamada T.Development of techniques for improving piston cooling performance(first report):measurement of heat absorption characteristics by engine oil in cooling channel[R].[S.l.]:Annual of Japan Society of Automotive Engineering, 2005.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(909.0KB)
    XML

    Article Metrics

    Article views (1701) PDF downloads(845) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return