Volume 30 Issue 5
May  2015
Turn off MathJax
Article Contents
GONG Dai-kun, ZHU Hui-ren, LIU Cun-liang, LU Cong-ming. Effect of Knudsen number on similar characteristics of film cooling flow and heat transfer[J]. Journal of Aerospace Power, 2015, 30(5): 1106-1112. doi: 10.13224/j.cnki.jasp.2015.05.011
Citation: GONG Dai-kun, ZHU Hui-ren, LIU Cun-liang, LU Cong-ming. Effect of Knudsen number on similar characteristics of film cooling flow and heat transfer[J]. Journal of Aerospace Power, 2015, 30(5): 1106-1112. doi: 10.13224/j.cnki.jasp.2015.05.011

Effect of Knudsen number on similar characteristics of film cooling flow and heat transfer

doi: 10.13224/j.cnki.jasp.2015.05.011
  • Received Date: 2013-12-04
  • Publish Date: 2015-05-28
  • The effect of Knudsen number Kn on the similar characteristics between different scale film cooling flow and heat transfer was numerically studied. Single-row plate cylindrical hole film cooling models with aperture of 0.3, 3, 10mm were selected. Cooling effectiveness and discharge coefficient of models under condition of different Kn and the same Kn were calculated. Results show that small and large hole models have similar flow and heat transfer characteristics under the same value of Kn, resulting in little differences between cooling effectiveness and discharge coefficient. When Kn varies, the flow and heat transfer characteristics of these two models are different, bringing about different cooling effectiveness and discharge coefficients. Therefore it is necessary to make sure that small and large hole models should have the same Kn in similar amplification experiment of film cooling.

     

  • loading
  • [1]
    韩介勤, 桑地普·杜达, 斯瑞纳斯·艾卡德.燃气轮机传热和冷却技术[M].程代京, 谢永慧, 译.西安:西安交通大学出版社, 2005.
    [2]
    Leylek J H, Mcgovern K T, Brittingham R A.A detailed analysis of film cooling physics:Part Ⅱ compound-angle injection with cylindrical holes[J].Journal of Turbomachinery, 2000, 122(1):113-121.
    [3]
    Li S J, Yang S F, Han J C.Effect of coolant density on leading edge showerhead film cooling using PSP measurement technique[R].ASME Paper GT2013-94198, 2013.
    [4]
    Dong H R, Youn S L, Young B K, et al.Film cooling and thermal field measurements for staggered rows of rectangular-shaped film cooling holes[R].ASME Paper GT2003-38608, 2003.
    [5]
    刘存良, 朱惠人, 白江涛, 等.基于瞬态液晶全表面测量技术的圆柱形孔气膜冷却特性研究[J].航空动力学报, 2009, 24(9):1959-1965. LIU Cunliang, ZHU Huiren, BAI Jiangtao, et al.Experimental research on film cooling characteristics of cylindrical hole with transient liquid crystal measurement technique[J].Journal of Aerospace Power, 2009, 24(9):1959-1965.(in Chinese)
    [6]
    邓宏武, 肖俊, 李国庆, 等.吹风比对旋转涡轮叶片气膜冷却的影响[J].航空动力学报, 2011, 26(7):1452-1457. DENG Hongwu, XIAO Jun, LI Guoqing, et al.Influence of blowing ratio on film cooling of rotating turbine blade[J].Journal of Aerospace Power, 2011, 26(7):1452-1457.(in Chinese)
    [7]
    Papautsky I, Ameel T, Frazier A B.A review of laminar single-phase flow in microchannels[R].New York:ASME International Mechanical Engineering Congress and Exposition, 2001.
    [8]
    Kandlikar S G, Colin S, et al.Heat transfer in microchannels:2012 status and research needs[J].Journal of Heat Transfer, 2013, 135(9):091001.1-091001.18.
    [9]
    陶然, 权晓波, 徐建中.微尺度流动中的几个问题[J].工程热物理学报, 2001, 22(5):575-577. TAO Ran, QUAN Xiaobo, XU Jianzhong.Several quetions in research of micro scale flow[J].Journal of Engineering Theromophysics, 2001, 22(5):575-577.(in Chinese)
    [10]
    Eringen A C.Simple microfluids[J].International Journal of Engineering Science, 1964, 2(2):205-217.
    [11]
    Turner S E, Lam L C, Gregory O J.Experimental investigation of gas flow in microchannels[J].Journal of Heat Transfer, 2004, 126(5):753-763.
    [12]
    Wu P Y, Little W A.Measurement of friction factors for flow and gases in very fine channels used for microminiature joule-thomson refrigerators[J].Cryogenics, 1983, 23(5):273-277.
    [13]
    杜东兴, 李志信, 过增元.微细光滑管内的气体流动阻力特性[J].中国科学:E辑, 2000, 30(2):173-178. DU Dongxing, LI ZHixin, GUO Zengyuan.The characteristics of resistance for gas flow in microtubes[J].Science in China:Series E, 2000, 30(2):173-178.(in Chinese)
    [14]
    邬小波, 过增元.微细光滑管内气体的流动与传热特性研究[J].工程热物理学报, 1997, 18(3):326-330. WU Xiaobo, GUO Zengyuan.Investigation of gas flow and heat transfer in smooth microtubes[J].Journal of Engineering Themophysics, 1997, 18(3):326-330.(in Chinese)
    [15]
    唐桂华, 陶文铨, 赵长颖.微圆管进口区气体流动与换热特性研究[J].工程热物理学报, 2008, 29(1):130-132. TANG Guihua, TAO Wenquan, ZHAO Changyin.Gas flow and heat transfer characteristics in the entrance region of microtubes[J].Journal of Engineering Themophysics, 2008, 29(1):130-132.(in Chinese)
    [16]
    许艳芝, 朱惠人, 郑杰.克努森数在微尺度相似流动特性研究中的作用[J].航空动力学报, 2013.28(8):1752-1758. XU Yanzhi, ZHU Huiren, ZHENG Jie.Effect of Knudsen number on microscale similar flow character[J].Journal of Aerospace Power, 2013, 28(8):1752-1758.(in Chinese)
    [17]
    沈青.稀薄气体动力学[M].北京:国防工业出版社, 2003.
    [18]
    刘存良, 朱惠人, 白江涛.收缩-扩张形气膜孔提高气膜冷却效率的机理研究[J].航空动力学报, 2008, 23(4):598-604. LIU Cunliang, ZHU Huiren, BAI Jiangtao.Study on the physics of film-cooling effectiveness enhancement by the converging-expanding hole[J].Journal of Aerospace Power, 2008, 23(4):598-604.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1415) PDF downloads(832) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return