| Citation: | LEI Chi, WEN Wei-dong, CUI Hai-tao. General transition arcs redesign and multivariable optimization of tenon-mortise joints[J]. Journal of Aerospace Power, 2015, 30(5): 1178-1183. doi: 10.13224/j.cnki.jasp.2015.05.020
|
| [1] |
刘长福, 邓明.航空发动机结构分析[M].西安:西北工业大学出版社2006.
|
| [2] |
郑旭东, 尉夺魁, 王兆丰, 等.某型航空发动机涡轮叶片和轮盘榫齿裂纹故障力学分析[J].航空发动机, 2005, 31(3):35-38. ZEHGN Xudong, YU Duokui, WANG Zhaofeng, et al.Mechanical analysis of crack failures in turbine blade and disk serration of an aero-engine[J].Aeroengine, 2005, 31(3):35-38.(in Chinese)
|
| [3] |
CUI Haitao, MA Haiquan, WEN Weidong.Reliability-based shape optimization of tenon/mortise in aero-engines with contact[J].Chinese Journal of Aeronautics, 2003, 16(4):193-197.
|
| [4] |
桂康宁.对冷旋压近似椭圆形封头等效代替标准椭圆形封头的浅见[J].金陵石油化工, 1998(2):15-18.
|
| [5] |
职玉山, 王仲人.三圆弧椭圆封头及其参数优化[J].机械工程师, 1998(2):4-6.
|
| [6] |
徐倩, 崔海涛.涡轮盘结构的低应力优化设计分析[R].北京:中国航空学会第九届小型发动机学术交流会, 2012.
|
| [7] |
周正贵.压气机叶片自动优化设计[J].航空动力学报, 2002, 17(3):305-308. ZHOU Zhenggui.Automatic design optimization of compressor blades[J].Journal of Aerospace Power, 2002, 17(3):305-308.(in Chinese)
|
| [8] |
温卫东, 高德平.榫头/榫槽接触问题边界元分析[J].航空动力学报, 1992, 7(2):117-120, 192. WEN Weidong, GAO Deping.Analysis of tenon and mortise contact problems of boundary element methods[J].Journal of Aerospace Power, 1992, 7(2):117-120, 192.(in Chinese)
|
| [9] |
方昌德.世界航空发动机手册[M].北京:航空工业出版社, 1996.
|
| [10] |
《中国航空材料手册》编辑委员会.中国航空材料手册[M].北京:中国标准出版社, 2001.
|
| [11] |
赵海.涡轮榫头/榫槽结构设计方法研究[D].南京:南京航空航天大学, 2005. ZHAO Hai.Research on design method of turbine tenon/mortise[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2005.(in Chinese)
|
| [12] |
胡殿印, 彭苗娇, 王荣桥.树脂基复合材料风扇叶片的优化设计[J].航空动力学报, 2012, 27(7):1630-1637. HU Dianyin, PENG Miaojiao, WANG Rongqiao.Optimization design of resin-based composite fan blade[J].Journal of Aerospace Power, 2012, 27(7):1630-1637.(in Chinese)
|
| [13] |
黄勇.张博林, 薛运锋, 等.UG二次开发与数据库应用基础与典型范例[M].北京:电子工业出版社, 2008.
|
| [14] |
龚曙光.谢桂兰.黄云清.ANSYS参数化编程与命令手册[M].北京:机械工业出版社, 2009.
|
| [15] |
赖宇阳.姜欣.Isight参数优化与实例详解[M].北京:北京航空航天大学出版社, 2012.
|
| [16] |
秦宁京.航空燃气涡轮发动机结构及强度计算[M].北京:北京科学教育编辑室, 1962.
|
| [17] |
杨兴宇, 阎晓军, 赵福星, 等.某型航空发动机涡轮盘低循环疲劳寿命分析[J].机械强度, 2004, 26(S):229-233. YANG Xingyu, YAN Xiaojun, ZHAO Fuxing, et al.Low cycle fatigue life of an aeroengine gas turbine disk[J].Mechanical Strength, 2004, 26(S):229-233.(in Chinese)
|
| [18] |
申秀丽, 齐晓东, 王荣桥, 等.航空发动机涡轮榫接结构齿形基本参数研究[J].航空动力学报, 2011, 26(4):735-744. SHEN Xiuli, QI Xiaodong, WANG Rongqiao, et al.Research on the dentiform basic parameters of aero-engine turbine joint structure[J].Journal of Aerospace Power, 2011, 26(4):735-744.(in Chinese)
|
DownLoad: