| Citation: | ZHANG Xiang-yang, LI Yong, CHU Qi-yi, LI Wen. Pultrusion and properties of the twisted carbon fiber/phenolic resin Z-pin[J]. Journal of Aerospace Power, 2015, 30(7): 1638-1644. doi: 10.13224/j.cnki.jasp.2015.07.015
|
| [1] |
Mouritz A P.Review of Z-pinned composite laminates[J].Composites Part A:Applied Science and Manufacturing,2007,38(12):2383-2397.
|
| [2] |
Cartie D D R.Effect of Z-fibers TM on the delamination behavior of carbon fiber/epoxy laminates[D].Cranfield:Cranfield University,2000.
|
| [3] |
孙先念,郑长良.层合复合材料Z-pinning增强技术的力学进展[J].航空学报,2006,27(6):1194-1202. SUN Xiannian,ZHENG Changliang.Advances on modeling through-the-thickness reinforcement of laminated composite by Z-pinning[J].Acta Aeronautica et Astronautica Sinica,2006,27(6):1194-1202.(in Chinese)
|
| [4] |
Toral V J,Castanié B,Barrau J J,et al.Multi-level analysis of low-cost Z-pinned composite joints:Part 2 joint behavior[J].Composites Part A:Applied Science and Manufacturing,2011,42(12):2082-2092.
|
| [5] |
Byrd L W,Birman V.The estimate of the effect of Z-pins on the strain release rate,fracture and fatigue in a composite co-cured Z-pinned double cantilever beam[J].Composite Structures,2005,68(1):53-63.
|
| [6] |
Walker S P,Sullivan B J.Sharp refractory composite leading edges on hypersonic vehicles[R].AIAA 2003-6915,2003.
|
| [7] |
李仲平.防热复合材料发展与展望[J].复合材料学报,2011,28(2):1-9. LI Zhongping.Major advancement and development trends of TPS composites[J].Acta Material Composite Sinica,2011,28(2):1-9.(in Chinese)
|
| [8] |
赵梦熊.载人飞船返回舱的烧蚀防热[J].气动实验与测量控制,1996,10(3):1-9. ZHAO Mengxiong.Ablative thermal protection of capsule type re-entry vehicle[J].Aerodynamic Experiment and Measurement and Control,1996,10(3):1-9.(in Chinese)
|
| [9] |
袁海根,曾金芳,杨杰,等.防热抗烧蚀复合材料研究进展[J].化学推进剂与高分子材料,2006,4(1):21-25. YUAN Haigen,ZENG Jinmei,YANG Jie,et al.Research progress of high temperature themoprotective and ablation resistant composite materials[J].Chemical Propellants and Polymeric Materials,2006,4(1):21-25.(in Chinese)
|
| [10] |
李宁.Z-pin增强酚醛层合板制备工艺及性能研究[D].南京:南京航空航天大学,2012. LI Ning.Research on preparation process and mechanical properties of Z-pinned phenolic composite laminates[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.(in Chinese)
|
| [11] |
Kardos J L,Dudukovi Dc' M P,Dave R.Void growth and resin transport during processing of thermosetting-matrix composites[M].Berlin:Springer,1986.
|
| [12] |
郭昕昕,刘永琪.拉挤用酚醛树脂固化过程的研究[J].纤维复合材料,1999,16(4):39-42. GUO Xinxin,LIU Yongqi.Research on the curing process of phenolic resin for pultrusion[J].Fiber Composites,1999,16(4):39-42.(in Chinese)
|
| [13] |
顾平,管辛.粘胶长丝加捻线的形态特征与数学模型[J].纺织学报,2005,26(2):33-36. GU Ping,GUAN Xin.Morphology features and mathematical model of viscose twisted filament threads[J].Journal of Textile Research,2005,26(2):33-36.(in Chinese)
|
| [14] |
Partridge I K,Cartie D D R,Bonnington T.Manufacture and performance of Z-pinned composites[M]//Shonaike G,Advani S.Advanced Polymeric Composites.Florida:CRC Press,2003.
|
| [15] |
王晓旭,陈利.复合材料Z-pin的压缩试验研究[J].航空材料学报,2011,31(4):90-95. WANG Xiaoxu,CHEN Li.Experimental studies on compressive properties of composite Z-pins[J].Journal of Aeronautical Materials,2011,31(4):90-95.(in Chinese)
|
| [16] |
Whitney J M.Geometrical effects of filament twist on the modulus and strength of graphite fiber-reinforced composites[J].Textile Research Journal,1966,36(9):765-770.
|
| [17] |
Rugg K L,Cox B N,Ward K E,et al.Damage mechanisms for angled through-thickness rod reinforcement in carbon-epoxy laminates[J].Composites Part A:Applied Science and Manufacturing,1998,29(12):1603-1613.
|
DownLoad: