| Citation: | DENG Jing-liang, CHU Wu-li, ZHANG Hao-guang. Stabilizing analysis of trapezoidal circumferential grooves on an axial rotor[J]. Journal of Aerospace Power, 2015, 30(7): 1721-1730. doi: 10.13224/j.cnki.jasp.2015.07.025
|
| [1] |
卢新根,楚武利,朱俊强,等.轴流压气机机匣处理研究进展及评述[J].力学进展,2006,36(2):222-232. LU Xingen,CHU Wuli,ZHU Junqiang,et al.A review of studies on casing treatment of axial-folw compressor[J].Advances in Mechanics,2006,36(2):222-232.(in Chinese)
|
| [2] |
YU Qing,LI Qiushi,LI Ling.The experimental researches on improving operating stability of a single-stage transonic fan[R].ASME GT-2002-30640,2002.
|
| [3] |
Brignole G A,Danner F C T,Kau H P.Time resolved simulation and experimental validation of the flow in axial slot casing treatments for transonic axial compressors[R].ASME Paper 2008-GT-50593,2008.
|
| [4] |
Hembera M,Danner F C T,Brignole G A.Numerical design and optimization of casing treatments for transonic axial compressors[R].AIAA,2008-5063,2008.
|
| [5] |
陈美宁,朴英,王大磊.处理机匣对跨声压气机进气畸变的响应[J].航空动力学报,2010,25(11):2578-2583. CHEN Meining,PIAO Ying,WANG Dalei.Effect of inlet distortion on the stability of a transonic compressor with casing treatment[J].Journal of Aerospace Power,2010,25(11):2578-2583.(in Chinese)
|
| [6] |
张皓光,楚武利,吴艳辉.缝式处理机匣轴向位置对压气机特性影响的机理[J].航空动力学报,2011,26(1):92-98. ZHANG Haoguang,CHU Wuli,WU Yanhui.Mechanism of influences of axial positions of axial skewed slot casing treatment on a compressor performance[J].Journal of Aerospace Power,2011,26(1):92-98.(in Chinese)
|
| [7] |
张皓光,楚武利,吴艳辉,等.自适应流通机匣改善压气机性能的机理[J].推进技术,2010,31(3):301-308. ZHANG Haoguang,CHU Wuli,WU Yanhui,et al.Flow mechanisms of improving compressor performance through self recirculation casing treatment[J].Journal of Propulsion Technology,2010,31(3):301-308.(in Chinese)
|
| [8] |
张皓光,吴俊,楚武利,等.带自适应流通处理机匣的轴流压气机全通道数值研究[J].推进技术,2013,34(7):918-924. ZHANG Haoguang,WU Jun,CHU Wuli,et al.Full-annulus numerical investigation of axial flow compressor with self recirculation casing treatment[J].Journal of Propulsion Technology,2013,34(7):918-924.(in Chinese)
|
| [9] |
Yang H,Nuernberger D,Nicke E,et al.Numerical investigation of casing treatment mechanisms with a conservative mixed-cell approach[R].ASME Paper GT2003-38483,2003.
|
| [10] |
Wilke I,Kau H P.A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage[R].ASME Paper GT-2002-30642,2002.
|
| [11] |
楚武利,张皓光,吴艳辉,等.槽式机匣槽宽变化对扩稳效果影响的试验与数值研究[J].航空学报,2008,29(4):866-872. CHU Wuli,ZHANG Haoguang,WU Yanhui,et al.Impact of grooved width of grooved casing on stall margin improvement[J].Acta Aeronautlca et Astronautica Sinica,2008,29(4):866-872.(in Chinese)
|
| [12] |
卢家玲,楚武利,张皓光.轴流压气机周向槽扩稳机理的有效利用[J].西北工业大学学报,2007,25(5):620-624. LU Jialing,CHU Wuli,ZHANG Haoguang.Making circumferential grooves in axial-flow compressor more effective[J].Journal of Northwestern Polytechnical University,2007,25(5):620-624.(in Chinese)
|
| [13] |
祝剑虹,朴英,周建兴,等.跨声压气机周向槽处理机匣非设计工况研究[J].航空动力学报,2008,23(4):687-692. ZHU Jianhong,PIAO Ying,ZHOU Jianxing,et al.Investigation of off design performance of a transonic compressor with circumferential grooves[J].Journal of Aerospace Power,2008,23(4):687-692.(in Chinese)
|
| [14] |
祝剑虹,朴英,岂兴明,等.压气机周向槽处理机匣的周向位置研究[J].哈尔滨工程大学学报,2008,29(4):342-347. ZHU Jianhong,PIAO Ying,QI Xingming,et al.Deal location of a compressor's circumferential casing treatment[J].Journal of Harbin Engineering University,2008,29(4):342-347.(in Chinese)
|
| [15] |
Shabbir A,Adamczyk J J.Flow mechanism for stall margin improvement due to circumferential casing grooves on axial compressors[R].ASME Paper GT-2004-53903,2004.
|
| [16] |
Rabe D C,Hah C.Application of casing circumferential grooves for improved stall margin in a transonic axial compressor[R].ASME Paper GT-2002-30641,2002.
|
| [17] |
Müller M W,Biela C,Schiffer H P.Effect of circumferential on the aerodynamic performance of an axial single-stage transonic compressor[R].ASME Paper GT2007-27365,2007.
|
| [18] |
李相君,楚武利,张皓光.高负荷跨声速轴流压气机周向浅槽处理机匣扩稳机理[J].推进技术,2013,34(5):629-637. LI Xiangjun,CHU Wuli,ZHANG Haoguang.Stabilizing mechanism of shallow circumferential grooves on a high loaded transonic axial-flow compressor[J].Journal of Propulsion Technology,2013,34(5):629-637.(in Chinese)
|
| [19] |
Choi K J,Kim J H,Kim K Y.Design optimization of circumferential casing grooves for a transonic axial compressor to enhance stall margin[R].ASME Paper GT-2010-22396,2010.
|
DownLoad: