| Citation: | KUANG Hai-yang, CHU Wu-li, ZHANG Hao-guang. Experimental and mechanism analysis of casing treatment with different axial angles[J]. Journal of Aerospace Power, 2015, 30(8): 1900-1908. doi: 10.13224/j.cnki.jasp.2015.08.013
|
| [1] |
Koch C C.Experimental evaluation of outer case blowing or bleeding of single-stage axial-flow compressor[R].NASA CR-54592,1970.
|
| [2] |
卢新根,楚武利,朱俊强,等.轴流压气机机匣处理研究进展及评述[J].力学进展,2006,36(2):222-223. LU Xingen,CHU Wuli,ZHU Junqiang,et al.A review of studies on casing treatment of axial-flow compressor[J]. Advances in Mechanics,2006,36(2):222-223.(in Chinese)
|
| [3] |
Baily E E.Effects of grooved casing treatment on the flow range capability of a single stage axial-flow compressor[R].NASA TMX-2459,1972.
|
| [4] |
Takata H,Tsukuda Y.Stall margin improvement by casing treatment-its mechanism and effectiveness[J].Journal of Engineering for Power,1977,99(1):121-133.
|
| [5] |
Greitzer E M,Nikkanen J P,Haddad D E,et al.A fundamental criterion for the application of rotor casing treatment[J].Journal of Fluids Engineering,1979,101(2):237-243.
|
| [6] |
刘志伟,张长生.周向槽机匣处理增加失速裕度的改进机理[J].西北工业大学学报,1986,4(4):405-415. LIU Zhiwei,ZHANG Changsheng.Improved mechanism for increasing stall margin by treatment of circumferentially grooved casing[J].Journal of Northwestern Polytechnical University,1986,4(4):405-415.(in Chinese)
|
| [7] |
Fujita H,Takata H.A study of configurations of casing treatment for axial flow compressors[J].Bulletin of Japan Society Mechanical Engineers,1984,27(230):1675-1681.
|
| [8] |
刘建勇,袁巍,陆亚钧.非轴对称处理机匣的周向处理范围的实验[J].航空动力学报,2009,24(6):1385-1388. LIU Jianyong,YAN Wei,LU Yajun.Experimental investigation about the circumferential treating angle of non-axisymmetric casing treatments[J].Journal of Aerospace Power,2009,24(6):1385-1388.(in Chinese)
|
| [9] |
夏钦斌,王如根,周敏,等.低雷诺数条件下跨声速转子轴向倾斜缝处理机匣扩稳研究[J].航空动力学报,2010,25(6):1389-1394. XIA Qingbin,WANG Rugen,ZHOU Min,et al.Research on the effects of a transonic compressor rotor with axial skewedslots casing treatment at low Reynolds number[J].Journal of Aerospace Power,2010,25(6):1389-1394.(in Chinese)
|
| [10] |
刘建勇,袁巍,陆亚钧.周向局部处理机匣对压气机影响的数值研究[J].航空动力学报,2010,25(7):1609-1614. LIU Jianyong,YAN Wei,LU Yajun.Numerical investigation about the effect of a partial circumference casing treatment on a compressor[J].Journal of Aerospace Power,2010,25(7):1609-1614.(in Chinese)
|
| [11] |
杜辉,滕金芳.机匣处理改善某单级跨声轴流压气机性能的机理研究[J].航空动力学报,2011,26(9):2089-2094. DU Hui,TENG Jinfang.Study on the flow mechanisms of casing treatment on a transonic single stage axial-flow compressor[J].Journal of Aerospace Power,2011,26(9):2089-2094.(in Chinese)
|
| [12] |
朱俊强,刘志伟.4种不同型式机匣处理的实验研究及机理分析[J].航空学报,1997,18(5):567-570. ZHU Junqiang,LIU Zhiwei.Experimental research on four kinds of treated casings[J].Acta Aeronautica et Astronautica Sinica,1997,18(5):567-570.(in Chinese)
|
| [13] |
Prince D C,Wisler D C,Hilvers D E.Study of casing treatment stall margin improvement phenmena[R].NASA CR-134552,1974.
|
| [14] |
Cheng P,Prell M E,Greitzer E M,et a1.Effects of compressor hub treatment on stator stall and pressure rise[J].AIAA Journal of Aircraft,1984,21(7):469-475.
|
| [15] |
Smith G D J,Cumpsty N A.Flow phenomena in compressor casing treatment[J].Transactions of the ASME,1984,106(3):532-541.
|
| [16] |
Johnson M C,Greitzer E M.Effects of slotted hub and casing treatments on compressor endwall flow fields[R].ASME Paper 86-GT-247,1986.
|
| [17] |
Lee N K W,Greitzer E M.Effects of endwall suction and blowing on compressor stability enhancement[J].Journal of Turbomachinery,1990,112(1):133-144.
|
| [18] |
Moore R D.Effect of ceasing treatment on overall and blade element performance of a compressor rotor[R].NASA TN D-6538,1971.
|
| [19] |
张皓光,楚武利,吴艳辉.缝式处理机匣轴向位置对压气机特性影响的机理[J].航空动力学报,2011,26(1):92-98. ZHANG Haoguang,CHU Wuli,WU Yanhui.Mechanism of influences of axial positions of axial skewed slot casing treatment on a compressorper formance[J].Journal of Aerospace Power,2011,26(1):92-98.(in Chinese)
|
DownLoad: