| Citation: | ZHOU You-tian, LI Jun, LI Cheng-long, LIU Dong-jian, LI Jing. Influence on compressor characteristic of inlet swirl flow distortion[J]. Journal of Aerospace Power, 2015, 30(8): 1936-1943. doi: 10.13224/j.cnki.jasp.2015.08.017
|
| [1] |
Reichert B A,Wendt B J.An improving diffusing S-duct flow performance by secondary flow control[R].AIAA 94-0365,1994.
|
| [2] |
姜建,屈霁云,史建邦,等.进气道旋流模拟系统及测量系统预先研究阶段报告[R].西安:中国飞行试验研究院发动机所,2006.
|
| [2] |
张丽芬,刘振侠,郭东明,等.S形进气道流动控制数值模拟研究[J].空气动力学学报,2009,27(2):240-245. ZHANG Lifen,LIU Zhengxia,GUO Dongming,et al.An investigation of secondary flow control in a diffusing S-duct inlet[J].Acta Aerodynamica Sinica,2009,27(2):240-245.(in Chinese)
|
| [4] |
Stocks C P,Bissinger N C.Design and development of tornado engine air intake[R].Advisory Group for Aerospace Research and Development,AGARD-CP-301,1981.
|
| [5] |
杨国才.腹部进气道旋流第二期风洞实验报告[R].四川 绵阳:中国空气动力研究与发展中心二所,1986.
|
| [6] |
叶飞.进气道出口旋流模拟技术[D].南京:南京航空航天大学,2007.
YE Fei.Simulated technology of intake swirl[D].Nangjing:Nanjing University of Aeronautics and Astronautics,2007.
|
| [7] |
Lecht M,Weyer H B.Unsteady rotor blade loading in an axial compressor with steady-state inlet distortions[R].Advisory Group for Aerospace Research and Development,AGARD-CP-248-30,1978.
|
| [8] |
赵振山,董军,郭承鹏.基于数值涡流发生器双S型进气道被动流动控制装置参数优化[J].空气动力学学报,2011,29(1):22-26. ZHOU Zhenshan,DONG Jun,GUO Chengpeng.Parameters optimization of passive flow control device for a dual s inlet by numerical vortex generator model[J].Acta Aerodynamica Sinica,2011,29(1):22-26.(in Chinese)
|
| [9] |
符小刚,张晓飞.用四面体涡发生器研究进气道旋流畸变[J].机械制造,2011,49(568):28-30.
|
| [10] |
郭东明,刘振侠,吴丁毅,等.三维进气道湍流流场数值模拟[J].航空计算技术,2006,36(1):90-93. GUO Dongming,LIU Zhengxia,WU Dingyi,et al.Numerical simulation of three-dimensional turbulent flow field inlet[J].Aeronautical Computing Technique,2006,36(1):90-93.(in Chinese)
|
| [11] |
彭成一,林峰,张堃元.旋流模拟器研究[J].航空动力学报,1986,1(2):103-107. PENG Chengyi,LIN Feng,ZHANG Kunyuan.Design of swirl simulators[J].Journal of Aerospace Power,1986,1(2):103-107.(in Chinese)
|
| [12] |
杨国才.在流场匹配方面进气道反旋流措施的工程应用研究[J].推进技术,1994,15(2):17-24. YANG Guocai.Research on engineering application of anti-swirl measures in engine inlet compatibility[J].Journal of Propulsion Technology,1994,15(2):17-24.(in Chinese)
|
| [13] |
杨国才.在进气道与发动机相容性方面反旋流措施的工程应用研究[J].推进技术,1995,16(4):28-33. YANG Guocai.A criterion for validation of engine S-duct inlet compatibility[J].Journal of Propulsion Technology,1995,16(4):28-33.(in Chinese)
|
| [14] |
杨 NF842 生,俞守勤.飞行器部件空气动力学[M].北京:国防工业出版社,1981.
|
| [15] |
林峰.旋流模拟技术研究[D].南京:南京航空航天大学,1988.
|
| [16] |
邓小宝,姜健,屈霁云,等.进气道旋流模拟及测量的风洞试验研究[J].燃气涡轮试验与研究,2009,22(4):51-56. DENG Xiaobao,JIANG Jian,QU Jiyun,et al.Research on simulation and measurement of inlet swirl by wind tunnel test[J].Gas Turbine Experiment and Research,2009,22(4):51-56.(in Chinese)
|
| [17] |
姜健,屈霁云,赵海刚,等.进气道旋流模拟及测量地面试车台试验研究[J].燃气涡轮试验与研究,2012,25(3):36-39. JIANG Jian,QU Jiyun,ZHAO Haigang,et al.Simulation and measurement of inlet swirl in ground test bed[J].Gas Turbine Experiment and Research,2012,25(3):36-39.(in Chinese)
|
| [18] |
彭成一,马家驹,尹军飞.新机试飞中的进气道旋流测量[J].推进技术,1994,15(4):8-13. PENG Chengyi,MA Jiaju,YIN Junfei.Measurement of inlet swirls in flight[J].Journal of Propulsion Technology,1994,15(4):8-13.(in Chinese)
|
| [19] |
向宏辉,葛宁,任铭林.基于实验数据的轴流压气机喘振边界经验预估方法[J].燃气轮机技术,2011,24(1):40-44. XIANG Honghui,GE Ning,REN Minglin.Empirical prediction method of the surge line of axial flow compressors based on statistical experimental data[J].Gas Turbine Experiment and Research,2011,24(1):40-44.(in Chinese)
|
DownLoad: