| Citation: | WANG Yan-zhong, HOU Liang-wei, LAN Zhou, ZHONG Yang, ZHAO Hong-pu, LÜ Qing-jun, ZHAO Xing-fu. Research on processing method of grinding face gear with involute disc wheel[J]. Journal of Aerospace Power, 2015, 30(8): 2033-2041. doi: 10.13224/j.cnki.jasp.2015.08.030
|
| [1] |
Litvin F L,Zhang Y,Wang J C,et al.Design and geometry of face-gear drives[J].Journal of Mechanical Design,1992,114(4):642-647.
|
| [2] |
Litvin F L,Fuentes A,Gonzalez-Perez I,et al.Face gear drive with helical involute pinion:geometry,generation by a shaper and worm,avoidance of singularities and stress analysis[R].NASA/CR-213443,2005.
|
| [3] |
Litvin F L,Gonzalez-Perez I,Fuentes A,et al.Design,generation and stress analysis of face gear drive with helical pinion[J].Computer Methods in Applied Mechanics Andengineering,2005,194(36):3870-3901.
|
| [4] |
Filler R R,Heath G F,Slaughter S C.Torque splitting by a concentric face gear transmission[R].Montreal,Canada:American Helicopter Society 58th Annual Forum,2002.
|
| [5] |
Lewicki D G,Heath G F,Filler R R,et al.RDS-21 face-gear surface durability tests[R].NASA/TM-2007-214970,2007.
|
| [6] |
李政民卿,朱如鹏.面齿轮插齿加工中过程包络面和理论齿廓的干涉[J].重庆大学学报,2007,30(5):55-58. LI Zhengminqing,ZHU Rupeng.Process method of face gear drive with spur involute pinion with the shaping machine[J].Journal of Chongqing University,2007,30(5):55-58.(in Chinese)
|
| [7] |
王志,石照耀,刘建炜,等.正交面齿轮计算机仿真加工[J].北京工业大学学报,2012,38(7):1004-1007. WANG Zhi,SHI Zhaoyao,LIU Jianwei,et al.Simulation of orthogonal face gear proceeding[J].Journal of Beijing University of Technology,2012,38(7):1004-1007.(in Chinese)
|
| [8] |
薛东彬,陈大立,李永祥.面齿轮的数控铣削加工[J].机械制造技术,2010,37(11):65-66. XUE Dongbin,CHEN Dali,LI Yongxiang.NC milling face gear processing[J].Manufacturing Technology,2010,37(11):65-66.(in Chinese)
|
| [9] |
ZHAO Ning,GUO Hui,FANG Zongde,et al.Research on machining face gear using a CNC hobbing machine[J].Advanced Materials Research,2010,97(101):3761-3764.
|
| [10] |
赵宁,郭辉,方宗德,等.用球形滚刀滚切面齿轮的理论误差[J].航空动力学报,2009,24(3):677-682. ZHAO Ning,GUO Hui,FANG Zongde,et al.Theory error of cutting face gears with sphericity hob[J].Journal of Aerospace Power,2009,24(3):677-682.(in Chinese)
|
| [11] |
Litvin F L,Chen Y J,Heath G F,et al.Apparatus and method for precision grinding face gear:US,6.146.235[P].2000-11-14.
|
| [12] |
赵宁,刘常青.关于面齿轮磨削加工机床的研究[J].机械设计与制造,2007,(10):151-152. ZHAO Ning,LIU Changqing.Study on grinding machine of fece gears[J].Mechanical Design and Manufacturing,2007,(10):151-152.(in Chinese)
|
| [13] |
彭先龙,方宗德,苏进展,等.采用碟形砂轮的面齿轮磨齿方法理论分析[J].航空动力学报,2012,27(5):1159-1165. PENG Xianlong,FANG Zongde,SU Jinzhan,et al.Theory analysis for application grinding disk in face gear grinding[J].Journal of Aerospace Power,2012,27(5):1159-1165.(in Chinese)
|
| [14] |
彭先龙,李建华,方宗德,等.碟形砂轮磨削面齿轮的数控规律[J].哈尔滨工业大学学报,2012,44(11):101-104. PENG Xianlong,LI Jianhua,FANG Zongde,et al.Computer numerical controlling rules of applying grinding disk in face gear grinding[J].Journal of Harbin Institute of Technology,2012,44(11):101-104.(in Chinese)
|
| [15] |
WANG Yanzhong,HOU Liangwei,LIU Yanqiang,et.al.Research on machining method of complex surface face gears[J].Applied Mechanics and Materials,2012,163:233-237.
|
| [16] |
姬存强,魏冰阳,邓效忠,等.正交面齿轮的设计与插齿加工试验[J].机械传动,2010,34(2):58-61. JI Cunqiang,WEI Bingyang,DENG Xiaozhong,et al.Design and gear shaping experiment on orthogonal face gear[J].Journal of Mechanical Transmission,2010,34(2):58-61.(in Chinese)
|
| [17] |
王延忠,吴灿辉,葛旭阳.面齿轮滚刀基本蜗杆的设计方法[J].北京航空航天大学学报,2009,35(2):166-169. WANG Yanzhong,WU Canhui,GE Xuyang,et al.Basal worm designing method of face gear hob[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):166-169.(in Chinese)
|
| [18] |
高金忠,朱如鹏,李政民卿.面齿轮滚磨刀具基蜗杆齿廓奇异点研究[J].航空动力学报,2011,26(10):2394-2400. GAO Jinzhong,ZHU Rupeng,LI Zhengminqing.Research on singularities of base worm thread surface for hobbing or grinding face gear[J].Journal of Aerospace Power,2011,26(10):2394-2400.(in Chinese)
|
DownLoad: