| Citation: | LI Juan, LING Xiang, PENG Hao. Heat transfer enhancement mechanism of transverse direction type serrated fin in turbulent flow based on field synergy principle[J]. Journal of Aerospace Power, 2015, 30(10): 2376-2383. doi: 10.13224/j.cnki.jasp.2015.10.011 |
| [1] |
王松汉.板翅式换热器[M].北京:化学工业出版社,1984.
|
| [2] |
彭浩,孙志江,凌祥.几种紧凑回热面传热和流动的实验和数值研究[J].航空动力学报,2008,23(1):138-144. PENG Hao,SUN Zhijiang,LING Xiang.Numerical and experimental study on flow and heat transfer performance of some compact surface recuperators[J].Journal of Aerospace Power,2008,23(1):138-144.(in Chinese)
|
| [3] |
顾黎昊,凌祥,彭浩.基于翅片板结构的烟气对流冷凝传热性能[J].航空动力学报,2012,27(12):2692-2698. GU Lihao,LING Xiang,PENG Hao.Experiment on forced convection-condensation heat transfer characteristics based on finned plate configuration[J].Journal of Aerospace Power,2012,27(12):2692-2698.(in Chinese)
|
| [4] |
Kays W M,London A L.Compact heat exchanger[M].3rd ed.NewYork:MacGraw-Hill Book Company,1984.
|
| [5] |
Muzychka Y S,Yovanovich M M.Modeling the f and j characteristics for transverse flow through an offset strip fin at low Reynolds number[J].Proceedings of the ASME,Heat Transfer Division,1999(1):79-90.
|
| [6] |
Guo L H,Chen J P.Empirical correlations for lubricant side heat transfer and friction characteristics of the HPD type steel offset strip fins[J].International Communications in Heat and Mass Transfer,2008,35(3):251-262.
|
| [7] |
Guo L H,Chen J P.Geometrical optimization and mould wear effect on HPD type steel offset strip fin performance[J].Energy Conversion and Management,2007,48(9):2473-2480.
|
| [8] |
Peng H,Ling X.Analysis of heat transfer and flow characteristics over serrated fins with different flow directions[J].Energy Conversion and Management,2011,52(2):826-835.
|
| [9] |
Guo Z Y,Li D Y,Wang B X.A novel concept for convective heat transfer enhancement[J].International Journal of Heat and Mass Transfer,1998,41(4):2221-2225.
|
| [10] |
过增元,黄素逸.场协同原理与强化传热新技术[M].北京:中国电力出版社,2004.
|
| [11] |
Meng J A,Chen Z J,Li Z X,et al.Field coordination analysis and convection heat transfer enhancement in duct[J]. Journal of Engineering Thermophysics,2003,24(4):652-654.
|
| [12] |
Tao W Q,Guo Z Y,Wang B X.Field synergy principle for enhancing convective heat transfer:its extension and numerical verifications[J].International Journal of Heat and Mass Transfer,2002,45(18):3849-3856.
|
| [13] |
He Y L,Tao W Q.Numerical studies on the inherent interrelationship between field synergy principle and entransy dissipation extreme principle for enhancing convective heat transfer[J].International Journal of Heat and Mass Transfer,2014,74:196-205.
|
| [14] |
Jin Y,Tang G H,He Y L,et al.Parametric study and field synergy principle analysis of H-type finned tube bank with 10 rows[J].International Journal of Heat and Mass Transfer,2013,60:241-251.
|
| [15] |
张艾萍,姚凯,徐志明.强化换热管中超声空化对场协同的影响[J].工程热物理学报,2013,34(2):356-359. ZHANG Aiping,YAO Kai,XU Zhiming.The influence of the field synergy by ultrasonic cavitation in the strengthening heat transfer tube[J].Journal of Engineering Thermophysics,2013,34(2):356-359.(in Chinese)
|
| [16] |
陶文铨.数值传热学[M].2版.西安:西安交通大学出版社,2001.
|
| [17] |
王福军.计算流体动力学分析:CFD软件原理与应用[M].北京:清华大学出版社,2004.
|
| [18] |
Fluent Incorportation.FLUENT user's guide[R].New York:Fluent Incorportation,2003.
|