| Citation: | LIU Xi-yue, ZHANG Jing-zhou, LI Gang-tuan, KANG Yong. Model experiment on pressure drop and thermal efficiency of double U-shaped tubes heat exchanger[J]. Journal of Aerospace Power, 2015, 30(11): 2592-2599. doi: 10.13224/j.cnki.jasp.2015.11.005
|
| [1] |
McDonald C F,Rodgers C.Heat-exchanged propulsion gas turbines: a candidate for future lower SFC and reduced-emission military and civil aero-engines[R].ASME GT2009- 5915,2009.
|
| [2] |
Kyprianidis K G,Gronstedt T,Ogaji S O T,et al.Assessment of future aero-engine designs with intercooled and intercooled recuperated cores[J].Journal of Engineering for Gas Turbine and Power,2011,133(1):011701.1-011701.10.
|
| [3] |
龚昊,王占学,康涌,等.间冷回热航空发动机性能计算与分析[J].航空动力学报,2014,29(6):1453-1461. GONG Hao,WANG Zhanxue,KANG Yong,et al.Performance calculation and analysis of intercooled recuperated aero-engine[J].Journal of Aerospace Power,2014,29(6):1453-1461.(in Chinese)
|
| [4] |
Wilfert G,Sieber J,Rolt A,et al.New environmental friendly aero engine core concepts[R].International Society for Air Breathing Engines,ISABE 2007-1120,2007.
|
| [5] |
曹梦源,唐海龙,陈敏.中冷回热航空涡扇发动机热力循环初步分析[J].航空动力学报,2009,24(11):2465-2470. CAO Mengyuan,TANG Hailong,CHEN Min.Preliminary analysis of thermodynamic cycle of an intercooled recuperated turbofan engine[J].Journal of Aerospace Power,2009,24(11):2465-2470.(in Chinese)
|
| [6] |
Min J K,Jeong J H,Ha M Y,et al.High temperature heat exchanger studies for applications to gas turbines[J].Heat Mass Transfer,2009,46(2):175-186.
|
| [7] |
Kim Y G,Choi B I,Kim K,et al.Performance analysis and optimal design of heat exchangers used in high temperature and high pressure system[J].International Journal of Aeronautical and Space Sciences,2010,11(1):19-25.
|
| [8] |
Fukui K,Kawakami Y,Okamoto K,et al.Compact heat exchangers for intercooled engines[R].International Society for Air Breathing Engines,ISABE 2011-1603,2011.
|
| [9] |
Missirlis D,Yakinthos K,Palikaras A,et al.Experimental and numerical investigation of the flow field through a heat exchanger for aero-engine applications[J].International Journal of Heat and Fluid Flow,2005,26(3):440-458.
|
| [10] |
Missirlis D,Yakinthos K,Storm P,et al.Modeling pressure drop of inclined flow through a heat exchanger for aero-engine applications[J].International Journal of Heat and Fluid Flow,2007,28(3):512-515.
|
| [11] |
Schoenenborn H,Ebert E,Simon B,et al.Thermo mechanical design of a heat exchanger for a recuperative aeroengine[J].Journal of Engineering for Gas Turbine and Power,2006,128(4):736-744.
|
| [12] |
Matos R S,Vargas J V C,Laursen T A,et al.Optimization study and heat transfer comparison of staggered circular and elliptic tubes in forced convection[J].International Journal of Heat and Mass Transfer,2001,44(20):3953-3961.
|
| [13] |
Matos R S,Laursen T A,Vargas J V C,et al.Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection[J].International Journal of Thermal Sciences,2004,43(5):477-487.
|
| [14] |
Wilson L,Narasimhan A,Venkateshan S P.Turbulent flow hydrodynamic experiments in near-compact heat exchanger models with aligned tubes[J].Journal of Fluids Engineering,2004,126(6):990-996.
|
| [15] |
Choi B I,Kim K S,Ha M Y,et al.Performance analysis and optimal design of heat exchangers used in a high temperature and high pressure system[R].ASME Paper GT2008-50511,2008.
|
| [16] |
Yakinthos K,Missirlis D,Palikaras A,et al.Optimization of the design of recuperative heat exchangers in the exhaust nozzle of an aero engine[J].Applied Mathematical Modeling,2007,31(11):2524-2541.
|
| [17] |
Albanakis C,Yakinthos K,Kritikos K,et al.The effect of heat transfer on the pressure drop through a heat exchanger for aero engine applications[J].Applied Thermal Engineering,2009,29(4):634-644.
|
| [18] |
Kritikos K,Albanakis C,Missirlis D,et al.Investigation of the thermal efficiency of a staggered elliptic-tube heat exchanger for aeroengine applications[J].Applied Thermal Engineering,2010,30(2/3):134-142.
|
DownLoad: