| Citation: | LI Long-ting, SONG Yan-ping, LIU Hua-ping, CHEN Fu. Effects of vortex generator jet on the flow of bowed compressor cascades[J]. Journal of Aerospace Power, 2015, 30(11): 2658-2665. doi: 10.13224/j.cnki.jasp.2015.11.013
|
| [1] |
Schlichting H,Das A.Recent research on cascade-flow problems[J].Journal of Basic Engineering,1966,88(1):221-228.
|
| [2] |
Gbadebo S A,Cumpsty N A,Hynes T P.Three-dimensional separations in axial compressors[J].Journal of Turbomachinery,2005,127(2):331-339.
|
| [3] |
刘艳明,钟兢军,王保国,等.具有不同翼刀的压气机叶栅二次流结构分析[J].航空动力学报,2008,23(7):1241-1245. LIU Yanming,ZHONG Jingjun,WANG Baoguo,et al.Analysis of secondary flow structures of compressor cascade with different fences[J].Journal of Aerospace Power,2008,23(7):1241-1245.(in Chinese)
|
| [4] |
Dang T Q,Van Rooij M P C,Larosiliere L M.Design of aspirated compressor blades using three-dimensional inverse method[R].Atlanta:International Joint Power Generation Conference,2003.
|
| [5] |
Sasaki T,Breugelmans F A E.Comparison of sweep and dihedral effects on compressor cascade performance[J].Journal of Turbomachinery,1998,120(2):454-456.
|
| [6] |
钟兢军.弯曲叶片控制扩压叶栅二次流动的实验研究[D].哈尔滨:哈尔滨工业大学,1995. ZHONG Jingjun,An experimental investigation by using curved blade to control secondary flow in compressor cascade[D].Harbin:Harbin Institute of Technology,1995.(in Chinese)
|
| [7] |
Gummer V,Kau H P,Wenger U.Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors[J].Journal of Turbomachinery,2001, 123(1):40-48.
|
| [8] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading:Part Ⅱ low and high speed designs and test verification[J].Journal of Turbomachinery,2002:124(4):533-542.
|
| [9] |
Wallis R A.The use of air jets for boundary layer control[R].London:Aeronautical Research Laboratories,Aerodynamics Note 110(N-34736),1952.
|
| [10] |
Bons J P,Sondergaard R,Rivir R B.The fluid dynamics of LPT blade separation control using pulsed jets[J].Journal of Turbomachinery,2002,124(1):77-85.
|
| [11] |
Culley D E,Bright M M,Prahst P S,et al.Active flow separation control of a stator vane using surface injection in a multistage compressor experiment[J].Journal of Turbomachinery,2004,126(1):24-34.
|
| [12] |
Nerger D,Gümmer V,Clemen C,et al.Experimental investigation of endwall and suction side blowing in a highly loaded compressor stator cascade[J].Journal of Turbomachinery,2012,134(2):255-267.
|
| [13] |
陈绍文.不同折转角压气机叶栅中应用弯曲叶片的实验与数值研究[D].哈尔滨:哈尔滨工业大学,2007. CHEN Shaowen.Experimental and numerical investigation of using bowed blade in compressor cascade with different turbine angles[D].Harbin:Harbin Institute of Technology,2007.(in Chinese)
|
| [14] |
Evans S,Hodson H,Hynes T,et al.Controlling separation on a simulated compressor blade using vortex-generator jets[J].Journal of Propulsion and Power,2010,26(4):819-827.
|
| [15] |
Compton D A,Johnston J P.Streamwise vortex production by pitched and skewed jets in a turbulent boundary layer[J].AIAA Journal,1992,30(3):640-647.
|
| [16] |
Hansen L,Bons J.Flow measurements of vortex generator jets in separating boundary layer[J].Journal of Propulsion and Power,2006,22(3):558-566.
|
| [17] |
张华良.采用叶片弯/掠及附面层抽吸控制扩压叶栅内涡结构的研究[D].哈尔滨:哈尔滨工业大学,2007. ZHANG Hualiang.Investigation on application of dihedral/swept blade and boundary layer suction to control vortex configurations in compressor cascades[D].Harbin:Harbin Institute of Technology,2007.(in Chinese)
|
DownLoad: