| Citation: | WANG Bin, YU Ding-peng, YE Zhi-feng, GUAN Hua-sheng. Numerical simulation on fuel vapor core configuration in fuel vapor core pump with radial straight blades[J]. Journal of Aerospace Power, 2015, 30(11): 2730-2737. doi: 10.13224/j.cnki.jasp.2015.11.022
|
| [1] |
孙健国,黄金泉,叶志锋,等.现代航空动力装置控制[M].北京:航空工业出版社,2009.
|
| [2] |
Pech K H,Downing N L.Development of a retracting vane centrifugal main fuel pump for gas turbine engines[J].Journal of Fluids Engineering,1976,98(4):619-625.
|
| [3] |
Rimmer R.The vapour core pump vortex inlet valve[C]//Proceedings of Fifth Cranfield Fluidics Conference.Cranfield:the British Hydromechanics Research Association,1972:14-41.
|
| [4] |
Kumar A,Goyal K.Cyclic pressure test of vapour core pump of reheat fuel control system of an aero-engine[J].International Journal of Engineering Research and Technology,2012,1(7):1-5.
|
| [5] |
Frank A,Leachman J.Vapor core centrifugal pump having main and low flow impellers:United States,4643635[P].1987-02-17.
|
| [6] |
史庆平,刘德彰.航空汽心泵叶轮流场的机理研究[J].航空学报,1985,6(5):511-512. SHI Qingping,LIU Dezhang.Mechanism research of flow field around aviation vapor core pump impeller[J].Acta Aeronautica et Astronautica Sinica,1985,6(5):511-512.(in Chinese)
|
| [7] |
顾民.汽心泵动态特性实验及数学模型[J].南京航空航天大学学报,1988,20(4):60-64. GU Min.Dynamic characteristic experiment and mathematical model of vapor core pump[J].Journal of Nanjing University of Aeronautics and Astronautics,1988,20(4):60-64.(in Chinese)
|
| [8] |
Shojaeefard M H,Tahani M,Ehghaghi M B,et al.Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid[J].Computers and Fluids,2012,60(3):61-70.
|
| [9] |
SHI Weidong,ZHOU Ling,LU Weigang,et al.Numerical prediction and performance experiment in a deep-well centrifugal pump with different impeller outlet width[J].Chinese Journal of Mechanical Engineering,2013,26(1):46-52.
|
| [10] |
LI Zhifeng,WU Dazhuan,WANG Leqin,et al.Numerical simulation of the transient flow in a centrifugal pump during starting period[J].Jorunal of Fluids Engineering,2010,132(8):081102.1-081102.8.
|
| [11] |
Barrio R,Fernández J,Blanco E,et al.Estimation of radial load in centrifugal pumps using computational fluid dynamics[J].European Journal of Mechanics:B Fluids,2011,30(3):316-324.
|
| [12] |
ZHANG Yuliang,LI Yi,CUI Baoling,et al.Numerical simulation and analysis of solid-liquid two-phase flow in centrifugal pump[J].Chinese Journal of Mechanical Engineering,2013,26(1):53-60.
|
| [13] |
薛梅新,朴英.加力燃油泵隔舌倒圆抑制分离的数值模拟[J].航空动力学报,2012,27(12):2799-2804. XUE Meixin,PIAO Ying.Numerical simulation on separation control by filleting casing tongue of after-burning fuel pump[J].Journal of Aerospace Power,2012,27(12):2799-2804.(in Chinese)
|
| [14] |
唐学林,贾玉霞,王福军,等.基于修正的RNG k-ε模型的水翼空化数值模拟[J].工程热物理学报,2012,33(9):1514-1518. TANG Xuelin,JIA Yuxia,WANG Fujun,et al.A modified RNG k-ε model of the numerical simulation on an airfoil[J].Journal of Engineering Thermophysics,2012,33(9):1514-1518.(in Chinese)
|
| [15] |
王勇,刘厚林,袁寿其,等.离心泵内部空化特性的CFD模拟[J].排灌机械工程学报,2011,29(2):99-103. WANG Yong,LIU Houlin,YUAN Shouqi,et al.CFD simulation on cavitation characteristics in centrifugal pump[J].Journal of Drainage and Irrigation Machinery Engineering,2011,29(2):99-103.(in Chinese)
|
| [16] |
Šavar M,Kozmar H,SutlovićI.Improving centrifugal pump efficiency by impeller trimming[J].Desalination,2009,249(2):654-659.
|
| [17] |
Shehata M H,Abd Elganny M E,Abd Elhafez A S,et al.Effect of shorted blade circumferential positions on centrifugal pump characteristics[C]//10th International Energy Conversion Engineering Conference.Atlanta,Georgia:AIAA,2012:1-19.
|
| [18] |
樊思齐,李华聪,樊丁,等.航空发动机控制[M].西安:西北工业大学出版社,2008.
|
DownLoad: