| Citation: | JIANG Yao, HU Jian, HU Hao-sheng. Numerical simulation on the effect of misalignment on outlet flow field of double-swirler[J]. Journal of Aerospace Power, 2015, 30(12): 2919-2924. doi: 10.13224/j.cnki.jasp.2015.12.015
|
| [1] |
McDonell V G,Arellao L,Lee S W,et al.Effect of hardware alignment of fuel distribution and combustion performance for a production engine fuel injection assembly[R].Irvine,California:26th Symposium on Combustion,1996.
|
| [2] |
Nikjooy M,Mongia H C,Samuelsen G S,et al.A numerical and experimental study of confined swirling jets[R].AIAA 89-2898,1989.
|
| [3] |
Ateshkadi A,Mcdonell V,Samuelsen G S.Effect of hardware geometry on gas and drop behavior in a radial mixer spray[R].AIAA 98-0247,1998.
|
| [4] |
Hsiao G,Mongia H C.Swirl cup modeling:Part Ⅲ grid independent solution with different turbulence models[R].AIAA-2003-1349,2003.
|
| [5] |
Hsiao G,Mongia H C,Vij A.Swirl cup modeling:Part Ⅱ inlet boundary conditions[J].AIAA-2003-1350,2003.
|
| [6] |
Grinstein F F,Young T R,LI Guoqiang,et al.Computational and experimental analysis of the flow dynamics in a multi-swirler combustor[R].AIAA-2002-1006,2002.
|
| [7] |
Mongia H C,AI-Roub M,Danis A,et al.Swirl cup modeling:Part Ⅰ[R].AIAA-2001-3576,2001.
|
| [8] |
FU Yongqiang,CAI Jun,Jeng S M,et al.Confinement effects on the swirling flow of a counter-rotating swirl cup[J].ASME Paper GT2005-68622,2005.
|
| [9] |
CAI Jun,FU Yongqiang,Flohre N.Experimental study on coherent structures of a counter-rotating multi-swirler cup[J].AIAA-2007-5674,2007.
|
| [10] |
Reddy A P,Sujith R I,Chakravarthy S R.Swirler flow field characteristic in a sudden expansion combustor geometry[J].Journal of Propulsion and Power,2006,22(4):800-808.
|
| [11] |
Syred N,Beer J M.Combustion in swirling flows:a review[J].Combustion and Flame,1974,23(2):143-201.
|
| [12] |
Adrian S,Hollis D,Carrote J.PIV measurements of combustor turbulence fields[J].ASME Paper GT2007-28050,2007.
|
| [13] |
Ramos J I,Somert H T.Swirling flow in a research combustor[J].AIAA Journal,1985,23(2):241-248.
|
| [14] |
Rizk N K,Mongia H C.Three-dimensional analysis of gas turbine combustors[J].Journal of Propulsion and Power,1991,7(3):445-451.
|
| [15] |
Rosfjord T J,Russell S.Nozzle design and manufacturing influences on fuel spray circumferential uniformity[J].Journal of Propulsion and Power,1989,5(2):144-150.
|
| [16] |
Rosfjord T J,Eckerle W A.Aerating fuel nozzle design influence on airflow features[J].Journal of Propulsion and Power,1991,7(6):849-856.
|
| [17] |
Cohen J M,Rosfjord T J.Influences on the sprays formed by high-shear fuel nozzle/swirler assemblies[R].Journal of Propulsion and Power,1993,9(1):16-27.
|
| [18] |
蒋尧.双级旋流器偏心对旋流器出口流场影响研究[D].湖南 株洲:中国航空动力机械研究所,2013. JIANG Yao.Research on the outlet flow field of double-swirler'smisalignment[D].Zhuzhou Hunan:China Aviation Powerplant Research Institute,2013.(in Chinese)
|
DownLoad: