Volume 30 Issue 12
Dec.  2015
Turn off MathJax
Article Contents
YIN Yao-bao, WANG Yu. Pressure characterization of the pre-stage of jet pipe servo valve[J]. Journal of Aerospace Power, 2015, 30(12): 3058-3064. doi: 10.13224/j.cnki.jasp.2015.12.032
Citation: YIN Yao-bao, WANG Yu. Pressure characterization of the pre-stage of jet pipe servo valve[J]. Journal of Aerospace Power, 2015, 30(12): 3058-3064. doi: 10.13224/j.cnki.jasp.2015.12.032

Pressure characterization of the pre-stage of jet pipe servo valve

doi: 10.13224/j.cnki.jasp.2015.12.032
  • Received Date: 2014-05-06
  • Publish Date: 2015-12-28
  • In order to analyze the characteristic of high jet pressure of jet pipe nozzle in the jet pipe servo valve, a pre-stage jet pipe servo valve mathematical model was established to get the impact of the jet pipe deflection displacement, the radius of jet pipe nozzle and the radius of receiving hole on its internal fluid pressure, nozzle exiting velocity and recovery pressure in the left and the right holes of receiver. Flow field analysis found that vortex was prone to occur at high velocity jet exit, and there existed annular negative pressure effect. The results showed that:under high jet pressure, when the radius of jet pipe nozzle increased, the recovery pressure increased, and when the radius of receiving hole increased, the recovery pressure decreased. The best internal value of the ratio of the radius of receiving hole to the radius of the jet pipe nozzle was[1.3, 1.5]. When jet pipe deflection displacement increased, on the side of displacement increase, the effective recieving area between the jet pipe and the receiving hole increased, but the vortex between the jet pipe and the receiving hole expanded and the annular negative pressure effect of the internal flow field increased, and the recovery pressure of the receiving hole decreased.

     

  • loading
  • [1]
    Maskrey R H,Thayer W J.A brief history of electrohydraulic servo mechanisms[J].Journal of Dynamic Systems,Measurement and Control,1978,100(2):110-116.
    [2]
    訚耀保.极端环境下的电液伺服理论及应用技术[M].上海:上海科学技术出版社,2012.
    [3]
    方群,黄增.电液伺服阀的发展历史、研究现状以及发展趋势[J].机床与液压,2007,35(11):162-165. FANG Qun,HUANG Zeng.Developing process,research actrality and trend of electrohydraulic servovalve[J].Machine Tool and Hydraulics,2007,35(11):162-165.(in Chinese)
    [4]
    王兆铭,渠立鹏,张东,等.射流管伺服阀在发动力温度控制中的应用[J].东北大学学报:自然科学版,2009,30(10):1485-1488. WANG Zhaoming,QU Lipeng,ZHANG Dong,et al.Applicationof jet-pipe hydraulic servovalve to temperature control of aeroengine[J].Journal of Northeastern University:Natrual Science,2009,30(10):1485-1488.(in Chinese)
    [5]
    Somashekhar S H,Singaperumal M,Kumar R K.FE approach:electro-mechanical-fluid interaction of jet pipe electrohydraulic flow control servovalve[R].International Mechanical Engineering Congress and Exposition,IMECE2003-42384,2003.
    [6]
    Somashekhar S H,Singaperumal M,Kumar R K.Mathematical modelling and simulation of a jet pipe electro-hydraulic flow control servo valve[J].Journal of Systems and Control Engineering,2007,221(3):365-382.
    [7]
    Henri P D,Hollerbach J M,Nahvi A.An analytical and experimental investigation of a jet pipe controlled electropneumatic actuator[J].IEEE Transactions on Robotics and Automation,1998,14(4):601-611.
    [8]
    Krivts I L.Optimization of performance characteristics of electropneumatic(two-stage) servo valve[J].Journal of Dynamic Systems,Measurement,and Conrtol,2004,126(2):416-420.
    [9]
    Kawashima K,Youn C,Kagawa T.Development of a nozzle-flapper-type servo valve using a slit structure[J].Journal of Fluids Engineering,2006,129(5):573-578.
    [10]
    Anderson R T,Li P Y.Mathematical modeling of a two spool flow control servovalve using a pressure control pilot[J].Journal of Dynamic Systems,Measurement and Conrtol,2002,124(3):420-427.
    [11]
    EI-Araby M,EI-kafrawy A,Fahmy A.Dynamic performance of a nonlinear non-dimensional two stage electrohydraulic servovalve model[J].International Journal of Mechanics and Materials in Design,2011,7(2):99-110.
    [12]
    曾广商,何友文.射流管伺服阀研制[J].液压与气动,1996,20(3):6-8. ZENG Guangshang,HE Youwen.The development of the jet pipe servo valve[J].Journal of Chinese Hydraulics and Pneumatics,1996,20(3):6-8.(in Chinese)
    [13]
    姚晓先,杜民,梁作宝.射流管阀压力特性研究[J].弹箭与制导学报,2002,23(4):56-59. YAO Xiaoxian,DU Min,LIANG Zuobao.Study of pressure character of jet pipe valves[J].Journal of Projectiles,Rockets,Missiles and Guidance,2002,23(4):56-59.(in Chinese)
    [14]
    冀宏,魏列江,方群,等.射流管伺服阀射流管放大器的流场解析[J].机床与液压,2008,36(10):129-131. JI Hong,WEI Liejiang,FANG Qun,et al.Investigation to the flow of the jet-pipe amplifier in a servovalve[J].Machine Tool and Hydraulics,2008,36(10):129-131.(in Chinese)
    [15]
    陆向辉,高殿荣.两级电液伺服阀双喷嘴挡板阀内流场计算与分析[J].中国机械工程,2012,40(16):1951-1956. LU Xianghui,GAO Dianrong.Calculation and analysis of internal flow field of a double nozzle flapper valve of two-stage electro-hydraulic servo valve[J].China Mechanical Engineering,2012,40(16):1951-1956.(in Chinese)
    [16]
    李松晶,宋彦伟,聂伯勋.采用磁流体的射流管伺服阀试验研究[J].机床与液压,2006,34(9):130-131,120. LI Songjing,SONG Yanwei,NIE Boxun.Experiments study on jet-pipe servo valve with magnetic fluid[J].Machine Tool and Hydraulics,2006,34(9):130-131,120.(in Chinese)
    [17]
    李跃松,朱玉川,吴洪涛,等.超磁致伸缩执行器驱动的射流伺服阀参数优化[J].航空学报,2011,32(7):1336-1344. LI Yuesong,ZHU Yuchuan,WU Hongtao,et al.Parameter optimization of jet-pipe servovalve driven by giant magnetostrictive actrator[J].Acta Aeronautica et Astronautica Sinica,2011,32(7):1336-1344.(in Chinese)
    [18]
    訚耀保.射流管伺服阀欧美专利分析[J].液压气动与密封,2012,36(2):68-73. YIN Yaobao.Analysis of foreign patens of jet pipe servovalve[J].Journal of Chinese Hydraulics and Pneumatics,2012,36(2):68-73.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (961) PDF downloads(452) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return