| Citation: | WANG Ying-yang, LI Xu-chang, WANG Hong-yu, ZHANG Han. Numerical analysis on effect on injection for supersonic combustor pylon[J]. Journal of Aerospace Power, 2016, 31(1): 211-218. doi: 10.13224/j.cnki.jasp.2016.01.027
|
| [1] |
Segal C,Michael J R.The scramjet engine processes and characteristics[M].Cambridge,England:Cambridge University Press,2009.
|
| [2] |
陈方,陈立红,张新宇.超声速燃烧室凹腔火焰稳定器的数值模拟[J].推进技术,2007,28(2):135-140. CHEN Fang,CHEN Lihong,ZHANG Xinyu.Numerical studies on cavity holders for supersonic combustors[J].Journal of Propulsion Technology,2007,28(2):135-140.(in Chinese)
|
| [3] |
徐旭,陈兵,徐大军.冲压发动机原理及技术[M].北京:北京航空航天大学出版社,2014.
|
| [4] |
蔡国彪,徐大军.高超声速飞行器技术[M].北京:科学出版社,2012.
|
| [5] |
苏义.支板超声速混合增强技术及其阻力特性研究[D].长沙:国防科学技术大学,2006. SU Yi.Investigations of supersonic mixing enhancement technology and drag ofstrut[D].Changsha:National University of Defense Technology,2006.(in Chinese)
|
| [6] |
高峰,王宏宇,张涵.超燃冲压发动机燃烧室数值流场分析研究综述[J].飞航导弹,2014(1):80-84.
|
| [7] |
Daniel L R,King P.Mixing effects of pylon-aided fuel injection located upstream of flame holding cavity in supersonic flow[R].AIAA-2005-3913,2005.
|
| [8] |
Pohlman M R,Greendyke R B.Critical design parameters for pylon-aided gaseous fuel injection[R].AIAA-2009-1422,2009.
|
| [9] |
金劲睿,刘玉英,洪燕.前置肋片对凹槽火焰稳定器混合特性的影响[J].航空动力学报,2011,26(12):2716-2721. JIN Jinrui,LIU Yuying,HONG Yan.Effects of injection fin on flow and mixing characteristics of cavity flame holder[J].Journal of Aerospace Power,2011,26(12):2716-2721.(in Chinese)
|
| [10] |
Gruber M R,Carter C D,Monters D R.Experimental studies of pylon-aided fuel injection into a supersonic cross flow[J].Journal of Propulsion and Power,2008,24(3):460-470.
|
| [11] |
Aguilera C,Pang B,Ghosh A.Scramjet mixing control using fin-guided fuel injection[R].AIAA-2009-5415,2009.
|
| [12] |
Aguilera C,Pang B,Ghosh A.Supersonic mixing enhancement and optimization using fin-guided fuel injection[R].AIAA-2010-1526,2010.
|
| [13] |
Takahashi H,Tu Q,Segal C.Effects of pylon-aided fuel injection on mixing in a supersonic flow field[J].Journal of Propulsion and Power,2010,26(5):1092-1099.
|
| [14] |
Balar R A,Gupta A K,Yu K H.Pylon-aided fuel injection into supersonic flow[R].AIAA-2007-834,2007.
|
| [15] |
Bagg C M G,Greendyke R.Computational analysis of strut induced mixing in a scramjet[R].AIAA-2009-1253.
|
| [16] |
郭金鑫,刘金林,朱卫兵.乙烯超燃燃烧室支板/凹腔结构组合的数值研究[J].固体火箭技术,2012,33(2):602-607. GUO Jinxin,LIU Jinlin,ZHU Weibing.Numerical study on supersonic combustor using ethane with strut and cavity combination[J].Journal of Rocket Technology,2012,33(2):602-607.(in Chinese)
|
| [17] |
张弯洲,乐嘉陵,田野.超燃发动机混合效率评估方法探讨[J].航空动力学报,2012,27(9):1958-1965. ZHANG Wanzhou,LE Jialing,TIAN Ye.Evaluations of the fuel mixing efficiency for scramjet[J].Journal of Aerospace Power,2012,27(9):1958-1965.(in Chinese)
|
| [18] |
杨银军,窦志国,段立伟.超声速来流中横向喷流角度对流动与混合特性的影响[J].现代电子技术,2013,36(17):151-154. YANG Yinjun,DOU Zhiguo,DUAN Liwei.Influence of lateral injection angle in supersonic inflow on flow and mixed characteristics[J].Modern Electronics Technique,2013,36(17):151-154.(in Chinese)
|
DownLoad: