Volume 31 Issue 6
Jun.  2016
Turn off MathJax
Article Contents
YAN Jia-jia, LIU Zhan-sheng, ZHANG Guang-hui, WEI Ji-qin. Static characteristics analysis of foil thrust bearing considering the rarefield gas effect[J]. Journal of Aerospace Power, 2016, 31(6): 1521-1529. doi: 10.13224/j.cnki.jasp.2016.06.030
Citation: YAN Jia-jia, LIU Zhan-sheng, ZHANG Guang-hui, WEI Ji-qin. Static characteristics analysis of foil thrust bearing considering the rarefield gas effect[J]. Journal of Aerospace Power, 2016, 31(6): 1521-1529. doi: 10.13224/j.cnki.jasp.2016.06.030

Static characteristics analysis of foil thrust bearing considering the rarefield gas effect

doi: 10.13224/j.cnki.jasp.2016.06.030
  • Received Date: 2014-09-03
  • Publish Date: 2016-06-28
  • A modified Reynolds equation considering the rarefield gas coefficient for the bump type gas foil thrust bearing was established based on the first-order slip velocity boundary condition. The coupled modified Reynolds and lubricating film thickness equations were solved using Newton-Raphson iterative method and finite deference method. The static characteristics including axial load capacity and lift-off speed were obtained. The effects of rarefied gas and bearing structural parameters on the static characteristics were analyzed and discussed. The results indicate that with the influence of rarefield gas, the axial load capacity decreases, and the lift-off speed increases. And the rarefield gas has a slighter effect under a higher operating speed and a larger foil compliance coefficient. When the assembled clearance is smaller than 10 μm, the lift-off speed increases rapidly with increasing of the assembled clearance of the foil thrust bearing. Therefore, the axial clearance should be controlled carefully in assembling the foil thrust bearing.

     

  • loading
  • [1]
    Dellacorte C,Valco M J.Load capacity estimation of foil air journal bearings for oil-free turbomachinery applications[J].Tribology Transactions,2000,43(4):795-801.
    [2]
    Heshmat H,Walowit J A,Pinkus O.Analysis of gas lubricated compliant thrust bearings[J].Journal of Lubrication Technology,1983,105(4):638-646.
    [3]
    Walowit J A,Murray S F,McCabe J T,et al.Gas lubricated foil bearing technology development for propulsion and power systems[R].Air Force Aero Propulsion Lacoratory,AFAPL-TR-73-92,1973.
    [4]
    Iordanoff I.Analysis of an aerodynamic compliant foil thrust bearing:method for a rapid design[J].Journal of Tribology,1999,121(4):816-822.
    [5]
    Heshmat C A,Xu D S,Heshmat H.Analysis of gas lubricated foil thrust bearings using coupled finite element and finite difference methods[J].Journal of Tribology,2000,122(1):199-204.
    [6]
    戚社苗,耿海鹏,郭海刚,等.弹性箔片动压气体推力轴承承载性能研究[J].润滑与密封,2006(5):1-4. QI Shemiao,GENG Haipeng,GUO Haigang,et al.Theoretical research on the load performance of aerodynamic compliant foil thrust bearings[J].Lubrication Engineering,2006(5):1-4.(in Chinese)
    [7]
    YANG Lihua,SHI Jianhua,LIU Heng,et al.Study on lift-up speed of aerodynamic compliant foil thrust bearings[J].Academic Journal of Xi'an Jiaotong University:English Edition,2007,19(1):63-66.
    [8]
    Lee D,Kim D.Design and performance prediction of hybrid air foil thrust bearings[J].Journal of Engineering for Gas Turbines and Power,2011,133(4):042501.1-042501.13.
    [9]
    Conboy T M.Real-gas effects in foil thrust bearings operating in the turbulent regime[J].Journal of Tribology,2013,135(3):031703.1-031703.12.
    [10]
    Gad A M,Kaneko S.A new structural stiffness model for bump-type foil bearings:application to generation II gas lubricated foil thrust bearing[J].Journal of Tribology,2014,136(4):041701.1-041701.13.
    [11]
    Burgdorfer A.The influence of the molecular mean free path on the performance of hydrodynamic gas lubricated bearings[J].Journal of Basic Engineering,1959,81(1):94-100.
    [12]
    Hsia Y T,Domoto G A.An experimental investigation of molecular rarefaction effects in gas lubricated bearings at ultra-low clearances[J].Journal of Lubrication Technology,1983,105(1):120-129.
    [13]
    Mitsuya Y.Modified Reynolds equation for ultra-thin film gas lubrication using 1.5-order slip-flow model and considering surface accommodation coefficient[J].Journal of Tribology,1993,115(2):289-294.
    [14]
    Wu L,Bogy D B.New first and second order slip models for the compressible Reynolds equation[J].Journal of Tribology,2003,125(3):558-561.
    [15]
    Park D,Lee Y,Kim C,et al.Static and dynamic characteristics of air foil thrust bearing considering tilting pad condition[R].ASME Paper GT2007-27814,2007.
    [16]
    Gad-el-Hak M.The fluid mechanics of microdevices-the freeman scholar lecture[J].Journal of Fluids Engineering,1999,121(1):5-33.
    [17]
    Walowit J A,Anno J N.Modern developments in lubrication mechanics[M].London:Applied Science Publishers,1975.
    [18]
    Wang N,Chang C.An application of Newton's method to the lubrication analysis of air-lubricated bearings[J].Tribology Transactions,1999,42(2):419-424.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1117) PDF downloads(595) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return