| Citation: | ZHENG Jian-wen, SONG Shuang-wen, PENG Jian-yong, LIU Tao. Effect of carbon deposit removing hole area on the outlet flow field of double-swirler[J]. Journal of Aerospace Power, 2016, 31(8): 1883-1888. doi: 10.13224/j.cnki.jasp.2016.08.012 |
| [1] |
彭云晖,林宇震,许全宏,等.双旋流空气雾化喷嘴喷雾、流动和燃烧性能[J].航空学报,2008,29(1):1-14. PENG Yunhui,LIN Yuzhen,XU Quanhong.Atomization,aerodynamics and combustion performance of swirl cup[J].Acta Aeronautica et Astronautica Sinica,2008,29(1):1-14.(in Chinese)
|
| [2] |
甘晓华.航空燃气轮机燃油喷嘴技术[M].北京:国防工业出版社,2006.
|
| [3] |
Mehta J,Shin H,Wisler D.Mean velocity and turbulent flow-field characteristics inside an advanced combustor swirl cup[R].AIAA 89-0215,1989.
|
| [4] |
Merkle K,Büchner H,Zarzalis N,et al.Influence of co and counter swirl on lean stability limits of an airblast nozzle[R].ASME Paper 2003-GT-38004,2003.
|
| [5] |
林阳,林宇震,刘高恩.收口套筒主燃区流场的PIV测量[J].航空动力学报,2007,22(12):1989-1993. LIN Yang,LIN Yuzhen,LIU Gaoen.PIV experimental study of primary zone flow field of convergent sleeve[J].Journal of Aerospace Power,2007,22(12):1989-1993.(in Chinese)
|
| [6] |
Wang H Y,McDonell V G,Samuelsen G S.The influence of spray angle on the continuous-and discrete-phase flow field downstream of an engine combustor swirl cup[R].AIAA 92-3231,1992.
|
| [7] |
《高效节能发动机文集》编委会.高效节能发动机文集:第4分册燃烧室设计与试验[M].北京:航空工业出版社,1991.
|
| [8] |
于锦峰,郭志辉,张君峰,等.套筒长度对火焰筒流场和雾化特性的影响[J].航空动力学报,2009,24(11):2506-2513. YU Jinfeng,GUO Zhihui,ZHANG Junfeng.Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup[J].Journal of Aerospace Power,2009,24(11):2506-2513.(in Chinese)
|
| [9] |
Ateshkadi A,McDonell V G,Samuelsen G S.Effect of mixer geometry on fuel spray distribution,emission and stability[R].AIAA 98-0247,1998.
|
| [10] |
Mongia H C,Gore J P,Grinstein F F,et al.Combustion research needs for helping development of next generation advanced vombustors[R].AIAA-2001-3853,2001.
|
| [11] |
张欣,刘勇,党新宪,等.单头部双级旋流器燃烧室流场PIV测量[J].工程热物理学报,2009,30(7):1253-1256. ZHANG Xin,LIU Yong,DANG Xinxian,et al.Experimental study on flow field of single-head combustor with dual-stage swirler by PIV[J].Journal of Engineering Thermophysics,2009,30(7):1253-1256.(in Chinese)
|
| [12] |
韩启祥,许铁军,黄健.双旋流器单头部燃烧室模型燃烧室冷态流场试验[J].航空动力学报,2008,23(8):1370-1374. HAN Qixiang,XU Tiejun,HUANG Jian.Experimental study of flow field of a model combustor with two swirlers[J].Journal of Aerospace Power,2008,23(8):1370-1374.(in Chinese)
|
| [13] |
张宝华.双旋流进气装置结构变量对冷态流场影响的试验研究[J].航空发动机,2008,34(1):41-45. ZHANG Baohua.Experimental investigation of effect of structure variable of double swirl air intake on cold flow field[J].Aeroengine,2008,34(1):41-45.(in Chinese)
|
| [14] |
顾洪斌,徐行,郭志辉,等.燃烧室头部两相流场实验研究[J].航空动力学报,2000,15(4):366-370. GU Hongbin,XU Xing,GUO Zhihui,et al.Experimental study of two-phase flow field in combustor head[J].Journal of Aerospace Power,2000,15(4):366-370.(in Chinese)
|
| [15] |
Jeng S M,Flohre N M,Mongia H C.Swirl cup modeling atomization[R].AIAA-2004-137,2004.
|
| [16] |
Cai J,Fu Y,Elkadi A,et al.Swirl cup modeling:Part Ⅳ effect of confinement on flow characteristics[R].AIAA-2003-0486,2003.
|
| [17] |
FU Yongqiang,CAI Jun,Jeng S M,et al.Confine effect on the swirling flow of a counter-rotating swirl cup[R].ASME Paper 2005-GT-68622,2005.
|
| [18] |
FU Yongqiang,CAI Jun,Jeng S M,et al.Characteristics of the swirling generated by a counter-rotating swirler[R].AIAA-2007-5690,2007.
|