| Citation: | CAO Xin, WANG Guan, HE Wei-feng, ZHANG Yi-fei, HE Guang-yu, YANG Zhu-fang. Sand erosion damage test on TC4 titanium alloy and TiN/Ti multilayer coating[J]. Journal of Aerospace Power, 2016, 31(9): 2218-2225. doi: 10.13224/j.cnki.jasp.2016.09.022
|
| [1] |
American Society for Metals.ASM handbook:friction,lubrication,and wear technology[M].[S.l.]:ASM International,1992.
|
| [2] |
吴小梅,李伟光,陆峰.钛合金叶片防护涂层研究[J].装备环境工程,2006,3(3):116-129. WU Xiaomei,LI Weiguang,LU Feng.Research of protective coating to the titanium alloy blade[J].Equipment Environment Engineering,2006,3(3):116-129.(in Chinese)
|
| [3] |
Pfledderer L,Pepi M.Sand erosion test method for DOD unique environments[C]//Proceedings of Tri-Service Corrosion Conference.Aberdeen,UK:Army Research Laboratory,2008:1-24.
|
| [4] |
Pepi M,Squillacioti R,Pfledderer L,et al.Solid particle erosion testing of helicopter rotor blade materials[J].Journal of Failure Analysis and Prevention,2012,12(1):96-108.
|
| [5] |
何光宇,李应红,柴艳,等.航空发动机压气机叶片砂尘冲蚀防护涂层关键问题综述[J].航空学报,2015,36(6):1733-1743. HE Guangyu,LI Yinghong,CHAI Yan,et al.Review of key issues on coating against sand erosion of aero-engine compressor blade[J].Acta Aeronautica et Astronautica Sinica,2015,36(6):1733-1743.(in Chinese)
|
| [6] |
郝贠洪,邢永明,杨诗婷.风沙环境下钢结构表面涂层冲蚀行为与侵蚀机理研究[J].摩擦学学报,2010,30(1):26-31. HAO Yunhong,XING Yongming,YANG Shiting.Erosion-wear behavior of steel structure coating subject to sandstorm[J].Tribology,2010,30(1):26-31.(in Chinese)
|
| [7] |
郝贠洪,邢永明,杨诗婷,等.风沙环境下钢结构涂层的冲蚀磨损力学性能研究[J].应用力学学报,2013,30(3):350-355. HAO Yunhong,XING Yongming,YANG Shiting,et al.The erosion-wear mechanical properties of the coating of steel structure subject to sandstorm[J].Chinese Journal of Applied Mechanics,2013,30(3):350-355.(in Chinese)
|
| [8] |
刘道新,奚运涛,韩栋,等.离子辅助电弧沉积ZrN梯度涂层抗固体粒子冲蚀行为研究[J].航空材料学报,2010,30(4):31-37. LIU Daoxin,XI Yuntao,HAN Dong,et al.Study on solid particle erosion behaviors of ZrN gradient coating prepared by ion assisting arc deposion[J].Journal of Aeronautical Materials,2010,30(4):31-37.(in Chinese)
|
| [9] |
张沙,龚烈航.前混合磨料水射流切割脆性材料研究[J].润滑与密封,2011,36(3):97-104. ZHANG Sha,GONG Liehang.Research on cutting brittle materials by pre-mixed abrasive water jet[J].Lubrication Engineering,2011,36(3):97-104.(in Chinese)
|
| [10] |
Feuerstein A,Kleyman A.Ti-N multilayer systems for compressor airfoil sand erosion protection[J].Surface and Coatings Technology,2009,204(6):1092-1096.
|
| [11] |
Laguna-Camacho J R,Cruz-Mendoza L A,Anzelmetti-Zaragoza J C,et al.Solid particle erosion on coatings employed to protect die casting molds[J].Progress in Organic Coatings,2012,74(4):750-757.
|
| [12] |
Reedy M W,Eden T J,Potter J K,et al.Erosion performance and characterization of nanolayer (Ti,Cr)N hard coatings for gas turbine engine compressor blade applications[J].Surface and Coatings Technology,2011,206(2):464-472.
|
| [13] |
Yang Q,Bielawski M,McKellar R C.Microstructures,mechanical properties,and erosion resistance of unbalanced magnetron sputtering deposited TiN/VN nano-structured coatings[J].Metallography,Microstructure,and Analysis,2012,1(3/4):150-157.
|
| [14] |
Zhuravleva P L,Treninkov I A,Sbitneva S V,et al.Investigation into the structure of TiN single-layer and TiN/ZrN multilayer coatings[J].Nanotechnologies in Russia,2010,5(9/10):669-675.
|
| [15] |
Kleis I,Kulu P.Solid particle erosion:occurrence,prediction and control[M].[S.l.]:Springer Science & Business Media,2007.
|
| [16] |
Alegría-Ortega J A,Ocampo-Carmona L M,Suárez-Bustamante F A,et al.Erosion-corrosion wear of Cr/CrN multi-layer coating deposited on AISI-304 stainless steel using the unbalanced magnetron (UBM) sputtering system[J].Wear,2012,290/291(4):149-153.
|
| [17] |
Schell J D,Hein G,Mendez M,et al.Erosion durability improvement of T64 engine for military helicopters[C]//Proceedings of American Helicopter Society 60th Annual Forum.Baltimore,US:American Helicopter Society,2004:7-10.
|
| [18] |
Swaminathan V P,Smith J S,Gandy D.High-temperature erosion testing standard and round robin testing[R].Santa Fe,US:6th International Conference on Advances in Materials Technology for Fossil Power Plants,2010.
|
| [19] |
Momber A W.Effects of target material properties on solid particle erosion of geomaterials at different impingement velocities[J].Wear,2014,319(1/2):69-83.
|
| [20] |
黄明辉.喷动床内气固两相流体流动数值模拟[D].西安:西北大学,2009. HUANG Minghui.Numerical simulation of gas-solids flow in spouted bed[D].Xi'an:Northwest University,2009.(in Chinese)
|
| [21] |
栗鸿飞,宋文武.PIV技术在流动测试与研究中的应用[J].西华大学学报:自然科学版,2009,28(5):27-31. LI Hongfei,SONG Wenwu.Application of PIV in the test and study of flow field[J].Journal of Xihua University:Natural Science Edition,2009,28(5):27-31.(in Chinese)
|
| [22] |
张永清,陈登崖,顾佩芝.韧性材料冲蚀磨损的机理研究[J].上海交通大学学报,1989,23(3):99-106. ZHANG Yongqing,CHEN Dengya,GU Peizhi.Erosion mechanism of ductile material[J].Journal of Shanghai Jiaotong University,1989,23(3):99-106.(in Chinese)
|
| [23] |
吴小梅,商晓宇.三种不锈钢材料抗固体颗粒冲蚀性能研究[J].航空材料学报,2012,32(3):68-72. WU Xiaomei,SHANG Xiaoyu.Study on erosion resistance of three stainless steels using solid particles[J].Journal of Aeronautical Materials,2012,32(3):68-72.(in Chinese)
|
| [24] |
Alefeld G,Mayer G.Interval analysis:theory and applications[J].Journal of Computational and Applied Mathematics,2000,121(1):421-464.
|
| [25] |
Guu Y Y,Lin J F.Comparison of the tribological characteristics of titanium nitride and titanium carbonitride coating films[J].Surface and Coatings Technology,1996,85(3):146-155.
|
| [26] |
Borawski B,Singh J,Todd J A,et al.Multi-layer coating design architecture for optimum particulate erosion resistance[J].Wear,2011,271(11/12):2782-2792.
|
DownLoad: